{"title":"10 00 Hp","description":null,"products":[{"product_id":"emax-industrial-plus-silent-175-psi-38-cfm-belt-drive-10hp-120gallon-two-stage-single-phase-electric-air-compressor","title":"EMAX Industrial Plus Silent 10HP 120 gal. 208-230V 1-Phase 2 Stage Vertical Stationary Electric Air Compressor","description":"\u003cp\u003e10 HP Air Compressor, 120 Gallon, 1 Phase, 2 Stage Pressure Lubricated, Silent Air System -ESP10V120V1\u003c\/p\u003e\n\u003cp\u003eThis EMAX Industrial Plus 10 HP 2 Stage V4 1 Phase vertical 120 gal. Piston Air Compressor is designed for up to 70,000 hours of commercial or industrial use with proper maintenance. This unit delivers 38 SCFM @ 100 PSI, top PSI of 175.\u003c\/p\u003e\n\u003cp\u003eOur unit features industrial 1750RPM electric motors, magnetic starters, automatic tank drain, powder coated ASME tank 200PSI rating, along with our continuous run functionality all paired with all cast iron 70,000 Hr. rated patented pressure lubricated reciprocating pump. This unit features our patented Whisper100 silent air system already installed. The Whisper100 dissipates compressor intake noise by channeling the intake air through a series of baffle plates. This low-profile system adds 4 levels of air filtration along with making the compressor quiet, lowering the decibels by more than 35%. All backed by the warranty in the industry!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Pressure Lubricated 2-stage cast iron pump with dual control design allows for automatic or continuous run rated at up to 70,000 hours based on B-10 bearing life rating\u003c\/li\u003e\n\u003cli\u003eContinuous mode functionality for workloads over 50% duty cycle eliminates wear and tear on your magnetic contactor\u003c\/li\u003e\n\u003cli\u003eBelt tension adjustor for fast, easy one-turn design reduces vibration and extends belt life\u003c\/li\u003e\n\u003cli\u003eAuto tank drain 110-volt dual timer controlled, eliminates daily maintenance\u003c\/li\u003e\n\u003cli\u003eSilent Air Technology\u003c\/li\u003e\n\u003cli\u003eETL Certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-table=\"10565\" class=\"TablePress\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":31470434320407,"sku":"ESP10V120V1","price":6228.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot_512.png?v=1682101756"},{"product_id":"emax-industrial-plus-silent-air-system-175-psi-38-cfm-belt-drive-2-stage-pressure-lubricated-1-phase-80-gallon-10-hp-electric-air-compressor","title":"EMAX Industrial Plus Silent Air System 10HP 80 gal. 208-230V 1-Phase  2 Stage Pressure Lubricated Electric Air Compressor","description":"\u003ch3\u003e\u003cstrong\u003e10 HP Air Compressor, 80 Gallon, 1 Phase, 2 Stage Pressure Lubricated, Silent Air System, EMAX Industrial Plus\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eSilent Air Piston Air Compressor\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered and manufactured in the U.S.A.\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cb\u003eThe whisper series compressors\u003c\/b\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ereduce stationary compressor DBA ratings by as much as 25%!  A noise suppression device was first conceived by EMAX engineers after feedback from competitor compressor users revealed a large number of complaints regarding the extreme noise level of their compressors in a work environment.   Stationary air compressor noise levels typically require owners to incur the added expense of a building or structure to house the compressor in an attempt to reduce noise in the work environment.  \u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cb\u003eThe Whisper\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/em\u003ecan be installed and operated in\u003cem\u003e\u003cspan\u003e \u003c\/span\u003eall\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eGarage, Farm Shop, and Industrial applications which eliminate the need for traditionally expensive and often inadequate separate buildings or structures to house the air compressor.  The Whisper silent air systems are already installed on the back of the tank with brackets that are fabricated for easy removal and low profile.\u003c\/p\u003e\n\u003cp\u003eThe Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and pre-filter media within the silencer cabinet.  As a result, the piston intake noise is trapped and dissipated within the silencer structure. As a result, the piston intake noise is trapped and dissipated within the silencer structure. It also acts as a secondary filtration for cleaner air.\u003c\/p\u003e\n\u003cp\u003ePatented Pressure Lubricated 2-stage cast iron pump with dual control design allows for automatic or continuous run rated at up to 70,000 hours based on B-10 bearing life rating\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"wp-image-2588 alignleft\" src=\"https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON.jpg\" alt=\"2-stage-pump-icon\" width=\"129\" height=\"129\" srcset=\"https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON.jpg 288w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-100x100.jpg 100w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-150x150.jpg 150w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-160x160.jpg 160w\" sizes=\"(max-width: 129px) 100vw, 129px\"\u003eAt the core of our Emax compressors is our pump. These pumps are\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eSUPER quiet\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ein operation and built to last!  We start with a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003esolid cast iron crankcase\u003c\/strong\u003e\u003c\/em\u003e. Unlike some competitor’s aluminum body crankcases – our solid cast iron crankcase will ensure stable crankshaft alignment and will handle more work load under heavy load conditions.\u003c\/p\u003e\n\u003cp\u003eOur pump also features a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eprecision balanced solid cast iron crankshaft\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewith Timken-Style stainless steel roller bearings on the front and rear of the crankshaft to ensure smooth \u0026amp; efficient operation with less drag and less energy use.\u003c\/p\u003e\n\u003cp\u003eOur pumps also feature several other key components that ensure durability and performance!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll steel connecting rods with replaceable rod bearing inserts. This allows our rods to be rebuilt!  99% of our competitors now use “throw-away” aluminum connecting rods in their pumps that have no re-build capability.\u003c\/li\u003e\n\u003cli\u003eRe-usable oil filter\u003c\/li\u003e\n\u003cli\u003eOil Pressure Gauge\u003c\/li\u003e\n\u003cli\u003eEligible for lifetime pump warranty\u003c\/li\u003e\n\u003cli\u003eRemovable 100% cast iron cylinders. These solid cast iron cylinders are more stable under heavy workloads and do not warp from heat.  Most of our competitors are using aluminum cylinders with a pressed-in sleeve that warp under extreme heat.  This makes competitor pumps good for about a 40-50% duty cycle – while claiming a 100% duty cycle. Most of the pumps with aluminum cylinders have to be replaced in 1-2 years because they would not hold up under heavy use.  Not our Air pumps!  Our solid cast iron cylinders can “take the heat” and are designed to perform on heavy load demands.\u003c\/li\u003e\n\u003cli\u003eAll cast iron cylinder heads.  Cast iron heads are more durable and dependable for trouble free operation.\u003c\/li\u003e\n\u003cli\u003e“Disc valve design” intake and exhaust valves. Disc valves have been around for over 100 years and have been proven to perform.  Most of our competitors are using “throw-away” reed valves which are not nearly as durable and can’t be re-built. Our disc valves come right out of the top of the cylinder head where they can be serviced in minutes instead of hours like reed valves.\u003c\/li\u003e\n\u003cli\u003eTop quality compression and oil rings.  Our rings ensure performance with low oil carry over (1-5 PPM).\u003c\/li\u003e\n\u003cli\u003ePrecision ground pistons machined to tight tolerances ensures low oil carry over.\u003c\/li\u003e\n\u003cli\u003ePremium “non-absorbent” gaskets prevent oil seepage from pump.\u003c\/li\u003e\n\u003cli\u003eAll cast iron flywheel with built-in fan.  The extra weight of our cast iron flywheel during run cycle gives the pump more “throw” on the compression stroke which will result in fewer loads on the electric motor.  Some manufacturers use aluminum flywheels that do not have the proper weight ratio to give the proper throw on the compression stroke when the pump is running.\u003c\/li\u003e\n\u003cli\u003eBuilt-in head unloaders. These unloaders are built into the intake valve assembly on the compressor head and perform a valuable function. They unload or open the intake valves under constant run applications.  This feature reduces internal pump heat from compression because the intake valve is held open throughout the unloading cycle. This allows fresh air to come into the cylinder chamber.  Under the compression stroke, the unloader holds the intake valve open allowing the air to blow back out the intake filter. This fresh air absorbs the heat out of the pump under heavy workloads.\u003c\/li\u003e\n\u003cli\u003eBuilt-in inter-cooler and after-coolers.  The inter-cooler allows air to be cooled between stages while the air cooled after-cooler provides a second cooling stage that cools the air before it goes into the tank.  Our after-cooler also includes an all copper main feed line from the pump into the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line …\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot only do we have one of the highest quality, most durable compressor pumps in the industry … but we have one of the lowest RPM compressor pumps on the market. \u003cem\u003e\u003cstrong\u003eThat’s the Emax difference!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePump RPM is a very critical factor in both performance and longevity.  For that reason, on most of our compressors, we normally “GO BIG” over-sizing our pumps and running them at lower RPMs than most manufacturers.  Our bigger, low RPM pump can still yield a high CFM output because both our bore and stroke are bigger.  Not only do you get the big CFM output, but the lower RPM operation also reduces friction and heat buildup to extend pump life!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRAISED MOUNTING PLATFORM\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur raised pump platform design is a nice feature for keeping your oil cool within the pump.  This platform raises the pump approximately 2” off the mounting base plate.  This allows for 100% constant flow of cool air from the flywheel fan to circulate by not only the top \u0026amp; sides of the pump crankcase, but also opens the underside of the crankcase to cooling air flow.  This ensures cooler oil temperatures within your pump.  Cooler oil not only helps to lubricate the pump but also pulls the heat off the pistons and connecting rods – reducing wear and adding many years of life to the compressor pump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNAME BRAND ELECTRIC MOTOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA tough pump needs a tough motor that can drive it! Emax uses only high quality name brand premium efficiency motors that meet all UL and CSA requirements.\u003c\/p\u003e\n\u003cp\u003eIt is most important to note that all of our motors are low RPM motors\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(1750 rpm)\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e… most manufacturers now use higher RPM motors (3450 rpm). 1750 RPM motors run much cooler than 3450 RPM motors because of the higher torque factor. They also yield low harmonic distortion, provide much higher torque in cold weather starting and require less electricity under start up.\u003c\/p\u003e\n\u003cp\u003eThe running and starting windings on these motors are all 100% copper wound for premium efficiency, reliable performance and durability.  Buyer beware: some motor manufacturers actually use aluminum windings with a copper coating in their motors which will last a fraction of the time that copper wound motors will last.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdditional Motor Features:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 1-3\/8” output shaft\u003c\/li\u003e\n\u003cli\u003eHigh quality ball bearings on the front and rear of the motor shaft\u003c\/li\u003e\n\u003cli\u003eLarge starting and running capacitors\u003c\/li\u003e\n\u003cli\u003e15 Service Factor load. This means the motor can be pulled 15% over full load for more break horsepower\u003c\/li\u003e\n\u003cli\u003eDynamically balanced armature for low vibration levels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBELT TENSIONER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYour Emax compressor will come equipped with a proprietary design feature that will eliminate countless hours of maintenance and an equal amount of frustration.  Our\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eAutomatic Belt Tensioner\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewill allow you to adjust the tension and alignment of your belts with ease and in just minutes.\u003c\/p\u003e\n\u003cp\u003eWith Emax Compressors\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eAutomatic Belt Tensioner\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003emaintenance on your belt tension and alignment is not a problem anymore.\u003c\/p\u003e\n\u003cp\u003eIt’s easy, you’ll just loosen the 4 bolts under the motor about 2 threads – turn the adjustment bolt on the end of the belt tensioner assembly using a ¾” wrench until desired tension alignment is achieved – re-tighten the 4 motor mount bolts – and your done.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBELT GUARD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe at Emax Compressor are always concerned about durability and about your safety in everything we build. Our belt guards are no exception.  Built right here in the USA with\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003e13 G steel and premium grade expanded metal\u003c\/strong\u003e,\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewe manufacture our belt guards to be tougher than any you will find in the industry today.  For your safety, our belt guards are OSHA approved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAIR TANK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe at Emax  are always concerned about durability and about your safety in everything we build.  Along with this philosophy, our air tanks are manufactured right here in the USA and are\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eASME code compliant\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ein 50 states including California.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDUAL TIMER AUTOMATIC TANK DRAIN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmax incorporates yet another standard value-added feature in it’s compressors that will eliminate maintenance and help to add years to the life of your air tank.\u003c\/p\u003e\n\u003cp\u003eIn hot, humid industrial environments, there is typically a lot of excess moisture in the air that is consumed into the compressor while under the intake \u0026amp; compression cycles. This moisture can then be transferred to the compressor into the air tank.\u003c\/p\u003e\n\u003cp\u003eAdditionally, if the compressor operates at a lower RPM and runs cooler (like our unit does) then water is condensed out of the air and collects in the air receiver. This water is harmful in many ways and must be drained out regularly.\u003c\/p\u003e\n\u003cp\u003eFirst, it robs you of air capacity in your tank.  Secondly, this moisture can be transferred through air lines into your equipment and\/or tools.\u003c\/p\u003e\n\u003cp\u003eLast, this water must be drained out regularly to avoid corrosion within your air tank which will shorten the overall life of your tank or worse yet result in tank failure.\u003c\/p\u003e\n\u003cp\u003eEmax’s\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eAutomatic Tank Drain with Integrated Dual Timer\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewill do this maintenance for you automatically on the time intervals you set to ensure that the condensation is removed regularly to avoid all of this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONTROLS \u0026amp; COMPONENTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe at Emax Compressor use only top quality components on our compressors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop quality pressure switches with an adjustable screw which allows you to adjust your pressure higher or lower.\u003c\/li\u003e\n\u003cli\u003e100% brass check valves with Teflon Seating.  All check valves on our compressors are all brass with a Teflon seating. This reduces tank noise when the compressor is running because the Teflon seating is much quieter than other materials and insulates noise when valves are opening and closing during the compression stage.\u003c\/li\u003e\n\u003cli\u003e100% brass ASME safety valves.  For your safety all safety valves are 100% brass and comply to ASME code. Valves are preset and sealed for correct settings.  In the event that your compressor would not turn off, our safety valves open keeping compressor from building too high of a pressure level in the tank.  This will help to avoid the potential of tank rupture.\u003c\/li\u003e\n\u003cli\u003eTop quality plumbing fittings are used to maintain proper sealing when connected to the tank.\u003c\/li\u003e\n\u003cli\u003eHigh quality 100% brass ball valves are used for turning air on and off from the air receiver.\u003c\/li\u003e\n\u003cli\u003eExtended tank water drain pipe plumbed out the front of the unit with a ¼” ball valve handle for easy tank draining.  Eliminates the hassle of draining the tank with the typical petcock style drain under the tank.\u003c\/li\u003e\n\u003cli\u003eLoad-less starting.  Thanks to built-in head un-loaders built into the intake valve assembly on the compressor head, “load-less” staring is built into this unit.  This unloads the pump so the pump will not start under direct head pressure. Without this feature, this will cause motor damage under starting cycle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMAGNETIC STARTER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis unit has a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eprewired magnetic starter\u003c\/strong\u003e\u003c\/em\u003e.  A magnetic starter is necessary for any motor over 15 amps.\u003c\/p\u003e\n\u003cp\u003eThis greater amp load puts more load on the contacts.  A typical pressure switch will not handle this greater load, so a prewired magnetic starter is required.  The use of a magnetic starter gives you longer life on your controls because they are not overloaded and gives you trouble-free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONTINUOUS RUN \u0026amp; AUTOMATIC START\/STOP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmax Compressors come equipped with “continuous run” feature that maximizes performance and reduces wear on the internal components of your motor.\u003c\/p\u003e\n\u003cp\u003eUnder heavy workload applications such as sandblasting, your compressor can cycle on and off many times per hour.  This constant cycling is causing more wear on the magnetic contacts in the motor because they are arching as the motor starts and stops.\u003c\/p\u003e\n\u003cp\u003eIf your workload is over 50% – 60% duty cycle we recommend engaging the continuous run feature to eliminate this “start \u0026amp; stop” arching and wear and tear on the magnetic contactors in your motor.\u003c\/p\u003e\n\u003cp\u003eFor normal workloads in your shop, you can turn off the continuous run and the unit will go back to automatic start\/stop operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMOTOR PULLEY AND BELTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use taper lock style 2-groove pulleys (not single groove).  We also use dual 2-groove, B-Style belts to drive our pumps.  This combination is best for a couple of reasons.\u003c\/p\u003e\n\u003cp\u003eFirst, dual belts ensure long belt life and yield low vibration which makes for smoother, more quiet operation because the dual belts do not have to be as tight as with a single belt setup.  The tighter the belts (as with a single belt setup) the more load on the compressor pump and motor bearings which decreases the life of both.\u003c\/p\u003e\n\u003cp\u003eSecond, our taper lock pulleys are much better than a fixed bore pulley with a set screw. A taper lock design will lock the pulley in position to the motor shaft allowing it not to loosen or move on the motor shaft.\u003c\/p\u003e\n\u003cp\u003eOur 5-year warranty should not only give you, our customer, complete confidence in our product – but also in our commitment to excellence in quality, support and service\u003c\/p\u003e\n\u003cdiv class=\"TablePress\" data-table=\"10566\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":31470512078871,"sku":"ESP10V080V1","price":5554.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot_514.png?v=1682101853"},{"product_id":"emax-industrial-plus-silent-air-system-175-psi-38-cfm-belt-drive-2-stage-pressure-lubricated-3-phase-80gal-10hp-electric-air-compressor","title":"EMAX Industrial Plus Silent Air System 10HP 80 gal. 208-230\/460V 3-Phase  2 Stage Pressure Lubricated Electric Air Compressor","description":"\u003ch2 id=\"titlebar-title\"\u003e10 HP Air Compressor, 80 Gallon, 3 Phase,2 Stage Pressure Lubricated, Silent Air System, EMAX Industrial Plus\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eSilent Air Piston Air Compressor\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered and manufactured in the U.S.A.\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cb\u003eThe whisper series compressors\u003c\/b\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ereduce stationary compressor DBA ratings by as much as 25%!  A noise suppression device was first conceived by EMAX engineers after feedback from competitor compressor users revealed a large number of complaints regarding the extreme noise level of their compressors in a work environment.   Stationary air compressor noise levels typically require owners to incur the added expense of a building or structure to house the compressor in an attempt to reduce noise in the work environment.  \u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cb\u003eThe Whisper\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/em\u003ecan be installed and operated in\u003cem\u003e\u003cspan\u003e \u003c\/span\u003eall\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eGarage, Farm Shop, and Industrial applications which eliminate the need for traditionally expensive and often inadequate separate buildings or structures to house the air compressor.  The Whisper silent air systems are already installed on the back of the tank with brackets that are fabricated for easy removal and low profile.\u003c\/p\u003e\n\u003cp\u003eThe Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and pre-filter media within the silencer cabinet.  As a result, the piston intake noise is trapped and dissipated within the silencer structure. As a result, the piston intake noise is trapped and dissipated within the silencer structure. It also acts as a secondary filtration for cleaner air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePatented Pressure Lubricated 2-stage cast iron pump with dual control design allows for automatic or continuous run rated at up to 70,000 hours based on B-10 bearing life rating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"wp-image-2588 alignleft\" src=\"https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON.jpg\" alt=\"2-stage-pump-icon\" width=\"117\" height=\"117\" srcset=\"https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON.jpg 288w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-100x100.jpg 100w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-150x150.jpg 150w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-160x160.jpg 160w\" sizes=\"(max-width: 117px) 100vw, 117px\"\u003eAt the core of our Emax compressors is our pump. These pumps are\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eSUPER quiet\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ein operation and built to last!  We start with a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003esolid cast iron crankcase\u003c\/strong\u003e\u003c\/em\u003e. Unlike some competitor’s aluminum body crankcases – our solid cast iron crankcase will ensure stable crankshaft alignment and will handle more work load under heavy load conditions.\u003c\/p\u003e\n\u003cp\u003eOur pump also features a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eprecision balanced solid cast iron crankshaft\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewith Timken-Style stainless steel roller bearings on the front and rear of the crankshaft to ensure smooth \u0026amp; efficient operation with less drag and less energy use.\u003c\/p\u003e\n\u003cp\u003eOur pumps also feature several other key components that ensure durability and performance!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll steel connecting rods with replaceable rod bearing inserts. This allows our rods to be rebuilt!  99% of our competitors now use “throw-away” aluminum connecting rods in their pumps that have no re-build capability.\u003c\/li\u003e\n\u003cli\u003eRe-usable oil filter\u003c\/li\u003e\n\u003cli\u003eOil Pressure Gauge\u003c\/li\u003e\n\u003cli\u003eEligible for lifetime pump warranty\u003c\/li\u003e\n\u003cli\u003eRemovable 100% cast iron cylinders. These solid cast iron cylinders are more stable under heavy workloads and do not warp from heat.  Most of our competitors are using aluminum cylinders with a pressed-in sleeve that warp under extreme heat.  This makes competitor pumps good for about a 40-50% duty cycle – while claiming a 100% duty cycle. Most of the pumps with aluminum cylinders have to be replaced in 1-2 years because they would not hold up under heavy use.  Not our Air pumps!  Our solid cast iron cylinders can “take the heat” and are designed to perform on heavy load demands.\u003c\/li\u003e\n\u003cli\u003eAll cast iron cylinder heads.  Cast iron heads are more durable and dependable for trouble free operation.\u003c\/li\u003e\n\u003cli\u003e“Disc valve design” intake and exhaust valves. Disc valves have been around for over 100 years and have been proven to perform.  Most of our competitors are using “throw-away” reed valves which are not nearly as durable and can’t be re-built. Our disc valves come right out of the top of the cylinder head where they can be serviced in minutes instead of hours like reed valves.\u003c\/li\u003e\n\u003cli\u003eTop quality compression and oil rings.  Our rings ensure performance with low oil carry over (1-5 PPM).\u003c\/li\u003e\n\u003cli\u003ePrecision ground pistons machined to tight tolerances ensures low oil carry over.\u003c\/li\u003e\n\u003cli\u003ePremium “non-absorbent” gaskets prevent oil seepage from pump.\u003c\/li\u003e\n\u003cli\u003eAll cast iron flywheel with built-in fan.  The extra weight of our cast iron flywheel during run cycle gives the pump more “throw” on the compression stroke which will result in fewer loads on the electric motor.  Some manufacturers use aluminum flywheels that do not have the proper weight ratio to give the proper throw on the compression stroke when the pump is running.\u003c\/li\u003e\n\u003cli\u003eBuilt-in head unloaders. These unloaders are built into the intake valve assembly on the compressor head and perform a valuable function. They unload or open the intake valves under constant run applications.  This feature reduces internal pump heat from compression because the intake valve is held open throughout the unloading cycle. This allows fresh air to come into the cylinder chamber.  Under the compression stroke, the unloader holds the intake valve open allowing the air to blow back out the intake filter. This fresh air absorbs the heat out of the pump under heavy workloads.\u003c\/li\u003e\n\u003cli\u003eBuilt-in inter-cooler and after-coolers.  The inter-cooler allows air to be cooled between stages while the air cooled after-cooler provides a second cooling stage that cools the air before it goes into the tank.  Our after-cooler also includes an all copper main feed line from the pump into the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line …\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot only do we have one of the highest quality, most durable compressor pumps in the industry … but we have one of the lowest RPM compressor pumps on the market. \u003cem\u003e\u003cstrong\u003eThat’s the Emax difference!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePump RPM is a very critical factor in both performance and longevity.  For that reason, on most of our compressors, we normally “GO BIG” over-sizing our pumps and running them at lower RPMs than most manufacturers.  Our bigger, low RPM pump can still yield a high CFM output because both our bore and stroke are bigger.  Not only do you get the big CFM output, but the lower RPM operation also reduces friction and heat buildup to extend pump life!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRAISED MOUNTING PLATFORM\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur raised pump platform design is a nice feature for keeping your oil cool within the pump.  This platform raises the pump approximately 2” off the mounting base plate.  This allows for 100% constant flow of cool air from the flywheel fan to circulate by not only the top \u0026amp; sides of the pump crankcase, but also opens the underside of the crankcase to cooling air flow.  This ensures cooler oil temperatures within your pump.  Cooler oil not only helps to lubricate the pump but also pulls the heat off the pistons and connecting rods – reducing wear and adding many years of life to the compressor pump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNAME BRAND ELECTRIC MOTOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA tough pump needs a tough motor that can drive it! Emax uses only high quality name brand premium efficiency motors that meet all UL and CSA requirements.\u003c\/p\u003e\n\u003cp\u003eIt is most important to note that all of our motors are low RPM motors\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(1750 rpm)\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e… most manufacturers now use higher RPM motors (3450 rpm). 1750 RPM motors run much cooler than 3450 RPM motors because of the higher torque factor. They also yield low harmonic distortion, provide much higher torque in cold weather starting and require less electricity under start up.\u003c\/p\u003e\n\u003cp\u003eThe running and starting windings on these motors are all 100% copper wound for premium efficiency, reliable performance and durability.  Buyer beware: some motor manufacturers actually use aluminum windings with a copper coating in their motors which will last a fraction of the time that copper wound motors will last.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdditional Motor Features:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 1-3\/8” output shaft\u003c\/li\u003e\n\u003cli\u003eHigh quality ball bearings on the front and rear of the motor shaft\u003c\/li\u003e\n\u003cli\u003eLarge starting and running capacitors\u003c\/li\u003e\n\u003cli\u003e15 Service Factor load. This means the motor can be pulled 15% over full load for more break horsepower\u003c\/li\u003e\n\u003cli\u003eDynamically balanced armature for low vibration levels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBELT TENSIONER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYour Emax compressor will come equipped with a proprietary design feature that will eliminate countless hours of maintenance and an equal amount of frustration.  Our\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eAutomatic Belt Tensioner\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewill allow you to adjust the tension and alignment of your belts with ease and in just minutes.\u003c\/p\u003e\n\u003cp\u003eWith Emax Compressors\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eAutomatic Belt Tensioner\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003emaintenance on your belt tension and alignment is not a problem anymore.\u003c\/p\u003e\n\u003cp\u003eIt’s easy, you’ll just loosen the 4 bolts under the motor about 2 threads – turn the adjustment bolt on the end of the belt tensioner assembly using a ¾” wrench until desired tension alignment is achieved – re-tighten the 4 motor mount bolts – and your done.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBELT GUARD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe at Emax Compressor are always concerned about durability and about your safety in everything we build. Our belt guards are no exception.  Built right here in the USA with\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003e13 G steel and premium grade expanded metal\u003c\/strong\u003e,\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewe manufacture our belt guards to be tougher than any you will find in the industry today.  For your safety, our belt guards are OSHA approved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAIR TANK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe at Emax  are always concerned about durability and about your safety in everything we build.  Along with this philosophy, our air tanks are manufactured right here in the USA and are\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eASME code compliant\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ein 50 states including California.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDUAL TIMER AUTOMATIC TANK DRAIN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmax incorporates yet another standard value-added feature in it’s compressors that will eliminate maintenance and help to add years to the life of your air tank.\u003c\/p\u003e\n\u003cp\u003eIn hot, humid industrial environments, there is typically a lot of excess moisture in the air that is consumed into the compressor while under the intake \u0026amp; compression cycles. This moisture can then be transferred to the compressor into the air tank.\u003c\/p\u003e\n\u003cp\u003eAdditionally, if the compressor operates at a lower RPM and runs cooler (like our unit does) then water is condensed out of the air and collects in the air receiver. This water is harmful in many ways and must be drained out regularly.\u003c\/p\u003e\n\u003cp\u003eFirst, it robs you of air capacity in your tank.  Secondly, this moisture can be transferred through air lines into your equipment and\/or tools.\u003c\/p\u003e\n\u003cp\u003eLast, this water must be drained out regularly to avoid corrosion within your air tank which will shorten the overall life of your tank or worse yet result in tank failure.\u003c\/p\u003e\n\u003cp\u003eEmax’s\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eAutomatic Tank Drain with Integrated Dual Timer\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewill do this maintenance for you automatically on the time intervals you set to ensure that the condensation is removed regularly to avoid all of this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONTROLS \u0026amp; COMPONENTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe at Emax Compressor use only top quality components on our compressors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop quality pressure switches with an adjustable screw which allows you to adjust your pressure higher or lower.\u003c\/li\u003e\n\u003cli\u003e100% brass check valves with Teflon Seating.  All check valves on our compressors are all brass with a Teflon seating. This reduces tank noise when the compressor is running because the Teflon seating is much quieter than other materials and insulates noise when valves are opening and closing during the compression stage.\u003c\/li\u003e\n\u003cli\u003e100% brass ASME safety valves.  For your safety all safety valves are 100% brass and comply to ASME code. Valves are preset and sealed for correct settings.  In the event that your compressor would not turn off, our safety valves open keeping compressor from building too high of a pressure level in the tank.  This will help to avoid the potential of tank rupture.\u003c\/li\u003e\n\u003cli\u003eTop quality plumbing fittings are used to maintain proper sealing when connected to the tank.\u003c\/li\u003e\n\u003cli\u003eHigh quality 100% brass ball valves are used for turning air on and off from the air receiver.\u003c\/li\u003e\n\u003cli\u003eExtended tank water drain pipe plumbed out the front of the unit with a ¼” ball valve handle for easy tank draining.  Eliminates the hassle of draining the tank with the typical petcock style drain under the tank.\u003c\/li\u003e\n\u003cli\u003eLoad-less starting.  Thanks to built-in head un-loaders built into the intake valve assembly on the compressor head, “load-less” staring is built into this unit.  This unloads the pump so the pump will not start under direct head pressure. Without this feature, this will cause motor damage under starting cycle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMAGNETIC STARTER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis unit has a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eprewired magnetic starter\u003c\/strong\u003e\u003c\/em\u003e.  A magnetic starter is necessary for any motor over 15 amps.\u003c\/p\u003e\n\u003cp\u003eThis greater amp load puts more load on the contacts.  A typical pressure switch will not handle this greater load, so a prewired magnetic starter is required.  The use of a magnetic starter gives you longer life on your controls because they are not overloaded and gives you trouble-free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONTINUOUS RUN \u0026amp; AUTOMATIC START\/STOP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmax Compressors come equipped with “continuous run” feature that maximizes performance and reduces wear on the internal components of your motor.\u003c\/p\u003e\n\u003cp\u003eUnder heavy workload applications such as sandblasting, your compressor can cycle on and off many times per hour.  This constant cycling is causing more wear on the magnetic contacts in the motor because they are arching as the motor starts and stops.\u003c\/p\u003e\n\u003cp\u003eIf your workload is over 50% – 60% duty cycle we recommend engaging the continuous run feature to eliminate this “start \u0026amp; stop” arching and wear and tear on the magnetic contactors in your motor.\u003c\/p\u003e\n\u003cp\u003eFor normal workloads in your shop, you can turn off the continuous run and the unit will go back to automatic start\/stop operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMOTOR PULLEY AND BELTS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use taper lock style 2-groove pulleys (not single groove).  We also use dual 2-groove, B-Style belts to drive our pumps.  This combination is best for a couple of reasons.\u003c\/p\u003e\n\u003cp\u003eFirst, dual belts ensure long belt life and yield low vibration which makes for smoother, more quiet operation because the dual belts do not have to be as tight as with a single belt setup.  The tighter the belts (as with a single belt setup) the more load on the compressor pump and motor bearings which decreases the life of both.\u003c\/p\u003e\n\u003cp\u003eSecond, our taper lock pulleys are much better than a fixed bore pulley with a set screw. A taper lock design will lock the pulley in position to the motor shaft allowing it not to loosen or move on the motor shaft.\u003c\/p\u003e\n\u003cp\u003eOur 5-year warranty should not only give you, our customer, complete confidence in our product – but also in our commitment to excellence in quality, support and service.\u003c\/p\u003e\n\u003cdiv class=\"TablePress\" data-table=\"10571\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":39257291784383,"sku":"ESP10V080V3","price":4599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/ESP07V080V1-V3-web-use-UPDATED-1152x1536.jpg?v=1725553434"},{"product_id":"emax-industrial-175-psi-38-cfm-belt-drive-10hp-2-stage-pressure-lubricated-single-phase-80-gal-10-hp-electric-air-compressor","title":"EMAX Industrial 175 PSI @ 38 CFM Belt Drive 10HP 208-230V 1-Phase 2 Stage 80 gal. Vertical Stationary Electric Air Compressor","description":"\u003ch3\u003e\n\u003cstrong\u003e10 HP Air Compressor, 2 Stage, Pressure Lubricated, Single Phase, V4, 80 Gallon, Vertical, Industrial\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eOur Industrial Series offers all the same quality and durability as our Plus series without all the extra cost of added features. We offer this series so that anyone can afford to have an EMAX Compressor.\u003c\/p\u003e\n\u003cp\u003eEMAX Industrial 10 HP 2 Stage V4, 1 Phase vertical 80 gal. Piston Air Compressor is designed for up to 70,000 hours of commercial or industrial use with proper maintenance. This unit delivers 38 SCFM @ 100 PSI, top PSI of 175. Our unit features industrial ODP electric motors, condor pressure switch, manual ball valve tank drain, powder coated ASME tank 200PSI rating, all paired with all cast iron 70,000 Hr. rated patented pressure lubricated reciprocating pump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPRESSOR PUMP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg sizes=\"(max-width: 123px) 100vw, 123px\" srcset=\"https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON.jpg 288w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-100x100.jpg 100w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-150x150.jpg 150w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-160x160.jpg 160w\" height=\"123\" width=\"123\" alt=\"2-stage-pump-icon\" src=\"https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON.jpg\" class=\"wp-image-2588 alignleft\"\u003e\u003c\/p\u003e\n\u003cp\u003eAt the core of our Emax compressors is our pump. These pumps are\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eSUPER quiet\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ein operation and built to last!  We start with a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003esolid cast iron crankcase\u003c\/strong\u003e\u003c\/em\u003e. Unlike some competitor’s aluminum body crankcases – our solid cast iron crankcase will ensure stable crankshaft alignment and will handle more work load under heavy load conditions.\u003c\/p\u003e\n\u003cp\u003eOur pump also features a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eprecision balanced solid cast iron crankshaft\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewith Timken-Style stainless steel roller bearings on the front and rear of the crankshaft to ensure smooth \u0026amp; efficient operation with less drag and less energy use.\u003c\/p\u003e\n\u003cp\u003ePatented Pressure Lubricated 2-stage cast iron pump with dual control design allows for automatic or continuous run rated at up to 70,000 hours based on B-10 bearing life rating\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll steel connecting rods with replaceable rod bearing inserts. This allows our rods to be rebuilt!  99% of our competitors now use “throw-away” aluminum connecting rods in their pumps that have no re-build capability.\u003c\/li\u003e\n\u003cli\u003eRe-usable oil filter\u003c\/li\u003e\n\u003cli\u003eOil Pressure Gauge\u003c\/li\u003e\n\u003cli\u003eEligible for lifetime pump warranty\u003c\/li\u003e\n\u003cli\u003eRemovable 100% cast iron cylinders. These solid cast iron cylinders are more stable under heavy workloads and do not warp from heat.  Most of our competitors are using aluminum cylinders with a pressed-in sleeve that warp under extreme heat.  This makes competitor pumps good for about a 40-50% duty cycle – while claiming a 100% duty cycle. Most of the pumps with aluminum cylinders have to be replaced in 1-2 years because they would not hold up under heavy use.  Not our Air pumps!  Our solid cast iron cylinders can “take the heat” and are designed to perform on heavy load demands.\u003c\/li\u003e\n\u003cli\u003eAll cast iron cylinder heads.  Cast iron heads are more durable and dependable for trouble free operation.\u003c\/li\u003e\n\u003cli\u003e“Disc valve design” intake and exhaust valves. Disc valves have been around for over 100 years and have been proven to perform.  Most of our competitors are using “throw-away” reed valves which are not nearly as durable and can’t be re-built. Our disc valves come right out of the top of the cylinder head where they can be serviced in minutes instead of hours like reed valves.\u003c\/li\u003e\n\u003cli\u003eTop quality compression and oil rings.  Our rings ensure performance with low oil carry over (1-5 PPM).\u003c\/li\u003e\n\u003cli\u003ePrecision ground pistons machined to tight tolerances ensures low oil carry over.\u003c\/li\u003e\n\u003cli\u003ePremium “non-absorbent” gaskets prevent oil seepage from pump.\u003c\/li\u003e\n\u003cli\u003eAll cast iron flywheel with built-in fan.  The extra weight of our cast iron flywheel during run cycle gives the pump more “throw” on the compression stroke which will result in fewer loads on the electric motor.  Some manufacturers use aluminum flywheels that do not have the proper weight ratio to give the proper throw on the compression stroke when the pump is running.\u003c\/li\u003e\n\u003cli\u003eBuilt-in head unloaders. These unloaders are built into the intake valve assembly on the compressor head and perform a valuable function. They unload or open the intake valves under constant run applications.  This feature reduces internal pump heat from compression because the intake valve is held open throughout the unloading cycle. This allows fresh air to come into the cylinder chamber.  Under the compression stroke, the unloader holds the intake valve open allowing the air to blow back out the intake filter. This fresh air absorbs the heat out of the pump under heavy workloads.\u003c\/li\u003e\n\u003cli\u003eBuilt-in inter-cooler and after-coolers.  The inter-cooler allows air to be cooled between stages while the air cooled after-cooler provides a second cooling stage that cools the air before it goes into the tank.  Our after-cooler also includes an all copper main feed line from the pump into the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line …\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot only do we have one of the highest quality, most durable compressor pumps in the industry … but we have one of the lowest RPM compressor pumps on the market. \u003cem\u003e\u003cstrong\u003eThat’s the Emax difference!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePump RPM is a very critical factor in both performance and longevity.  For that reason, on most of our compressors, we normally “GO BIG” over-sizing our pumps and running them at lower RPMs than most manufacturers.  Our bigger, low RPM pump can still yield a high CFM output because both our bore and stroke are bigger.  Not only do you get the big CFM output, but the lower RPM operation also reduces friction and heat buildup to extend pump life!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNAME BRAND ELECTRIC MOTOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese units have name brand OPD (open drip motors) on them. They carry a 5 Year warranty.\u003c\/p\u003e\n\u003cp\u003eIt is most important to note that all of our motors are low RPM motors\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(1750 rpm)\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e… most manufacturers now use higher RPM motors (3450 rpm). 1750 RPM motors run much cooler than 3450 RPM motors because of the higher torque factor. They also yield low harmonic distortion, provide much higher torque in cold weather starting and require less electricity under start up.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdditional Motor Features:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 1-3\/8” output shaft\u003c\/li\u003e\n\u003cli\u003eHigh quality ball bearings on the front and rear of the motor shaft\u003c\/li\u003e\n\u003cli\u003eLarge starting and running capacitors\u003c\/li\u003e\n\u003cli\u003e15 Service Factor load. This means the motor can be pulled 15% over full load for more break horsepower\u003c\/li\u003e\n\u003cli\u003eDynamically balanced armature for low vibration levels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBELT GUARD  \u003c\/strong\u003eWe at Emax Compressor are always concerned about durability and about your safety in everything we build. Our belt guards are no exception.  Built right here in the USA with\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cb\u003e13 G steel and premium grade expanded metal\u003c\/b\u003e,\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewe manufacture our belt guards to be tougher than any you will find in the industry today.  For your safety, our belt guards are OSHA approved.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMAGNETIC STARTER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis unit has a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cb\u003eprewired magnetic starter\u003c\/b\u003e\u003c\/em\u003e.  A magnetic starter is necessary for any motor over 15 amps.\u003c\/p\u003e\n\u003cp\u003eThis greater amp load puts more load on the contacts.  A typical pressure switch will not handle this greater load, so a prewired magnetic starter is required.  The use of a magnetic starter gives you longer life on your controls because they are not overloaded and gives you trouble-free operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIR TANK \u003c\/strong\u003eWe at Emax  are always concerned about durability and about your safety in everything we build.  Along with this philosophy, our air tanks are manufactured right here in the USA and are\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eASME code compliant\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ein 50 states including California.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCONTROLS \u0026amp; COMPONENTS \u003c\/strong\u003eWe at Emax Compressor use only top quality components on our compressors.\n\u003cul\u003e\n\u003cli\u003eTop quality pressure switches with an adjustable screw which allows you to adjust your pressure higher or lower.\u003c\/li\u003e\n\u003cli\u003e100% brass check valves with Teflon Seating.  All check valves on our compressors are all brass with a Teflon seating. This reduces tank noise when the compressor is running because the Teflon seating is much quieter than other materials and insulates noise when valves are opening and closing during the compression stage.\u003c\/li\u003e\n\u003cli\u003e100% brass ASME safety valves.  For your safety all safety valves are 100% brass and comply to ASME code. Valves are preset and sealed for correct settings.  In the event that your compressor would not turn off, our safety valves open keeping compressor from building too high of a pressure level in the tank.  This will help to avoid the potential of tank rupture.\u003c\/li\u003e\n\u003cli\u003eTop quality plumbing fittings are used to maintain proper sealing when connected to the tank.\u003c\/li\u003e\n\u003cli\u003eHigh quality 100% brass ball valves are used for turning air on and off from the air receiver.\u003c\/li\u003e\n\u003cli\u003eExtended tank water drain pipe plumbed out the front of the unit with a ¼” ball valve handle for easy tank draining.  Eliminates the hassle of draining the tank with the typical petcock style drain under the tank.\u003c\/li\u003e\n\u003cli\u003eLoad-less starting.  Thanks to built-in head un-loaders built into the intake valve assembly on the compressor head, “load-less” staring is built into this unit.  This unloads the pump so the pump will not start under direct head pressure. Without this feature, this will cause motor damage under starting cycle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOTOR PULLEY AND BELTS \u003c\/strong\u003eWe use taper lock style 2-groove pulleys (not single groove).  We also use dual 2-groove, B-Style belts to drive our pumps.  This combination is best for a couple of reasons.First, dual belts ensure long belt life and yield low vibration which makes for smoother, more quiet operation because the dual belts do not have to be as tight as with a single belt setup.  The tighter the belts (as with a single belt setup) the more load on the compressor pump and motor bearings which decreases the life of both.Second, our taper lock pulleys are much better than a fixed bore pulley with a set screw. A taper lock design will lock the pulley in position to the motor shaft allowing it not to loosen or move on the motor shaft.Our 5-year warranty should not only give you, our customer, complete confidence in our product – but also in our commitment to excellence in quality, support and service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-table=\"10572\" class=\"TablePress\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":31470713143319,"sku":"EI10V080V1","price":4569.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot_517.png?v=1682101987"},{"product_id":"emax-industrial-plus-full-package-silent-air-pressure-175-psi-30-cfm-belt-drive-7-5hp-80gal-electric-lubricated-piston-compressors-with-dryer-bundle-packages","title":"EMAX Industrial Plus 175 PSI @ 30 CFM Belt Drive 7.5HP 80gal. Silent Air Pressure Electric Lubricated Piston Compressor w\/ Dryer Bundle Packages (Full Package)","description":"\u003ch3\u003e\u003cstrong\u003e7.5 HP Air Compressor with 30 CFM Air Dryer, 1 Phase, Silent Air System, Piston\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSilent\u003c\/strong\u003e\u003cstrong\u003e Air Piston Air Compressor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered and manufactured in the U.S.A. \u003cem\u003e\u003cstrong\u003eThe whisper series compressors\u003c\/strong\u003e\u003c\/em\u003e reduce stationary compressor DBA ratings by as much as 25%!  A noise suppression device was first conceived by EMAX engineers after feedback from competitor compressor users revealed a large number of complaints regarding the extreme noise level of their compressors in a work environment.   Stationary air compressor noise levels typically require owners to incur the added expense of a building or structure to house the compressor in an attempt to reduce noise in the work environment.   \u003cem\u003e\u003cstrong\u003eThe Whisper \u003c\/strong\u003e\u003c\/em\u003ecan be installed and operated in\u003cem\u003e all\u003c\/em\u003e Garage, Farm Shop, and Industrial applications which eliminate the need for traditionally expensive and often inadequate separate buildings or structures to house the air compressor.  The Whisper silent air systems are already installed on the back of the tank with brackets that are fabricated for easy removal and low profile.\u003c\/p\u003e\n\u003cp\u003eThe Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and pre-filter media within the silencer cabinet.  As a result, the piston intake noise is trapped and dissipated within the silencer structure. As a result, the piston intake noise is trapped and dissipated within the silencer structure. It also acts as a secondary filtration for cleaner air.\u003c\/p\u003e\n\u003cp\u003eThis Bundle has our Emax Industrial Plus 7.5 HP 2 Stage Inline 1 Phase Vertical 80 Gallon Piston Air Compressor is designed for up to 50,000 hours of commercial or industrial use with proper maintenance. We have paired it with our environmentally friendly 30CFM Refrigerated air dryer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eCOMPRESSOR PUMP\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt the core of our Emax compressors is our pump. These pumps are SUPER quiet in operation and built to last!  We start with a solid cast iron crankcase. Unlike some competitor’s aluminum body crankcases – our solid cast iron crankcase will ensure stable crankshaft alignment and will handle more work load under heavy load conditions.\u003c\/p\u003e\n\u003cp\u003eOur pump also features a precision balanced solid cast iron crankshaft with Timken-Style stainless steel roller bearings on the front and rear of the crankshaft to ensure smooth \u0026amp; efficient operation with less drag and less energy use.\u003c\/p\u003e\n\u003cp\u003eOur pumps also feature several other key components that ensure durability and performance!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll steel connecting rods with replaceable rod bearing inserts. This allows our rods to be rebuilt!  99% of our competitors now use “throw-away” aluminum connecting rods in their pumps that have no re-build capability.\u003c\/li\u003e\n\u003cli\u003eRemovable 100% cast iron cylinders. These solid cast iron cylinders are more stable under heavy workloads and do not warp from heat.  Most of our competitors are using aluminum cylinders with a pressed-in sleeve that warp under extreme heat.  Our solid cast iron cylinders can “take the heat” and are designed to perform on heavy load demands.\u003c\/li\u003e\n\u003cli\u003eAll cast iron cylinder heads.  Cast iron heads are more durable and dependable for trouble free operation.\u003c\/li\u003e\n\u003cli\u003e“Disc valve design” intake and exhaust valves. Disc valves have been around for over 100 years and have been proven to perform.  Most of our competitors are using “throw-away” reed valves which are not nearly as durable and can’t be re-built. Our disc valves come right out of the top of the cylinder head where they can be serviced in minutes instead of hours like reed valves.\u003c\/li\u003e\n\u003cli\u003eTop quality compression and oil rings.  Our rings ensure performance with low oil carry over (1-5 PPM).\u003c\/li\u003e\n\u003cli\u003ePrecision ground pistons machined to tight tolerances ensures low oil carry over.\u003c\/li\u003e\n\u003cli\u003ePremium “non-absorbent” gaskets prevent oil seepage from pump.\u003c\/li\u003e\n\u003cli\u003eAll cast iron flywheel with built-in fan.  The extra weight of our cast iron flywheel during run cycle gives the pump more “throw” on the compression stroke which will result in fewer loads on the electric motor.\u003c\/li\u003e\n\u003cli\u003eBuilt-in head unloaders.  This feature reduces internal pump heat from compression because the intake valve is held open throughout the unloading cycle. This allows fresh air to come into the cylinder chamber.  Under the compression stroke, the unloader holds the intake valve open allowing the air to blow back out the intake filter. This fresh air absorbs the heat out of the pump under heavy workloads.\u003c\/li\u003e\n\u003cli\u003eBuilt-in inter-cooler and after-coolers.  The inter-cooler allows air to be cooled between stages while the air cooled after-cooler provides a second cooling stage that cools the air before it goes into the tank.  Our after-cooler also includes an all copper main feed line from the pump into the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eBOTTOM LINE …\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot only do we have one of the highest quality, most durable compressor pumps in the industry … but we have one of the lowest RPM compressor pumps on the market. That’s the Emax difference!\u003c\/p\u003e\n\u003cp\u003ePump RPM is a very critical factor in both performance and longevity.  For that reason, on most of our compressors, we normally “GO BIG” over-sizing our pumps and running them at lower RPMs than most manufacturers.  Our bigger, low RPM pump can still yield a high CFM output because both our bore and stroke are bigger.  Not only do you get the big CFM output, but the lower RPM operation also reduces friction and heat buildup to extend pump life!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eRAISED MOUNTING PLATFORM\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur raised pump platform design is a nice feature for keeping your oil cool within the pump.  This platform raises the pump approximately 2” off the mounting base plate.  This allows for 100% constant flow of cool air from the flywheel fan to circulate by not only the top \u0026amp; sides of the pump crankcase, but also opens the underside of the crankcase to cooling air flow.  This ensures cooler oil temperatures within your pump.  Cooler oil not only helps to lubricate the pump but also pulls the heat off the pistons and connecting rods – reducing wear and adding many years of life to the compressor pump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eNAME BRAND ELECTRIC MOTOR\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese units have name brand industrial grade motors on them. They carry a 5 Year warranty.\u003c\/p\u003e\n\u003cp\u003eIt is most important to note that all of our motors are low RPM motors (1750 rpm) … most manufacturers now use higher RPM motors (3450 rpm). 1750 RPM motors run much cooler than 3450 RPM motors because of the higher torque factor. They also yield low harmonic distortion, provide much higher torque in cold weather starting and require less electricity under start\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eBELT TENSIONER\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYour Emax compressor will come equipped with a proprietary design feature that will eliminate countless hours of maintenance and an equal amount of frustration.  Our Automatic Belt Tensioner will allow you to adjust the tension and alignment of your belts with ease and in just minutes.\u003c\/p\u003e\n\u003cp\u003eWith Emax Compressors Automatic Belt Tensioner maintenance on your belt tension and alignment is not a problem anymore.\u003c\/p\u003e\n\u003cp\u003eIt’s easy, you’ll just loosen the 4 bolts under the motor about 2 threads – turn the adjustment bolt on the end of the belt tensioner assembly using a ¾” wrench until desired tension alignment is achieved – re-tighten the 4 motor mount bolts – and you’re done.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eBELT GUARD\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt  EMAX Compressor we are always concerned about durability and about your safety in everything we build. Our belt guards are no exception.  Built right here in the USA with 13 G steel and premium grade expanded metal and powder coated to prevent rusting, we manufacture our belt guards to be tougher than any you will find in the industry today.  For your safety, our belt guards are OSHA approved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAIR TANK\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe at Emax are always concerned about durability and about your safety in everything we build.  Along with this philosophy, our air tanks are manufactured right here in the USA and are ASME code compliant in 50 states including California.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDUAL TIMER AUTOMATIC TANK DRAIN\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmax’s Automatic Tank Drain with Integrated Dual Timer will do this maintenance for you automatically on the time intervals you set to ensure that the condensation is removed regularly to avoid all of this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eCONTROLS \u0026amp; COMPONENTS\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe at Emax Compressor use only top quality components on our compressors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop quality pressure switches with an adjustable screw which allows you to adjust your pressure higher or lower.\u003c\/li\u003e\n\u003cli\u003e100% brass check valves with Teflon Seating.\u003c\/li\u003e\n\u003cli\u003e100% brass ASME safety valves.  For your safety all safety valves are 100% brass and comply to ASME code.\u003c\/li\u003e\n\u003cli\u003eTop quality plumbing fittings are used to maintain proper sealing when connected to the tank.\u003c\/li\u003e\n\u003cli\u003eHigh quality 100% brass ball valves are used for turning air on and off from the air receiver.\u003c\/li\u003e\n\u003cli\u003eExtended tank water drain pipe plumbed out the front of the unit with a ¼” ball valve handle for easy tank draining.  Eliminates the hassle of draining the tank with the typical petcock style drain under the tank.\u003c\/li\u003e\n\u003cli\u003eCondor Switch This unit has a prewired condor starter and pressure switch built into one. Features an actuation- type diaphragm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eCONTINUOUS RUN \u0026amp; AUTOMATIC START\/STOP\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmax Compressors come equipped with “continuous run” feature that maximizes performance and reduces wear on the internal components of your motor.\u003c\/p\u003e\n\u003cp\u003eUnder heavy workload applications such as sandblasting, your compressor can cycle on and off many times per hour.  This constant cycling is causing more wear on the magnetic contacts in the motor because they are arching as the motor starts and stops.\u003c\/p\u003e\n\u003cp\u003eIf your workload is over 50% – 60% duty cycle we recommend engaging the continuous run feature to eliminate this “start \u0026amp; stop” arching and wear and tear on the magnetic contactors in your motor.\u003c\/p\u003e\n\u003cp\u003eFor normal workloads in your shop, you can turn off the continuous run and the unit will go back to automatic start\/stop operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMOTOR PULLEY AND BELTS\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use taper lock style 2-groove pulleys (not single groove).  We also use dual 2-groove, B-Style belts to drive our pumps.  This combination is best for a couple of reasons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e30CFM REFRIGERATED AIR DRYER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur EMAX air dryer is the only energy efficient dryer systems with aluminum refrigerated air inner cooler. The air is filtered of all solid particles 0.01 micron and larger.  Clean, dry compressed air leaving the dryer minimizes maintenance and repair and also reduces internal dryer contamination. We designed them with Non-corrosive inner and after cooler. Our dryers feature stainless steel heat exchanger for maximum dryer life and less maintenance.  Emax Air dryers are UL-CSA approved scroll compressor \u0026amp; electric system for high efficiency and durability. They feature adjustable hot bypass for complete dryer function in low and high CFM flow preventing dryer freeze up.\u003c\/p\u003e\n\u003cp\u003eKeep Water, Oil, And Dirt Out of Your Compressed Air\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLess corrosion of pipes and tools means less downtime\u003c\/li\u003e\n\u003cli\u003eAvoid splotches \u0026amp; stains on your projects with proper filtration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnergy Efficient Aluminum Refrigerated Air Cooling System\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for maximum performance and efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRust Free, Stainless Steel Heat Exchanger\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum heat transfer, maximum dryer life \u0026amp; less maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRefrigerated Air Inlet Inner Cooler\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides trouble free operation for high temp cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnvironmentally Safe\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmentally friendly R134 Refrigerant\u003c\/li\u003e\n\u003cli\u003eAdjustable dual timer auto drain\u003c\/li\u003e\n\u003cli\u003eAluminum Plate Heat Exchanger with 10 year warranty\u003c\/li\u003e\n\u003cli\u003eBuilt in Pre-filter replaceable .005 Micron Filter\u003c\/li\u003e\n\u003cli\u003eActive Coalescing Filter with replaceable .001 micron filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompact And Efficient\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreat for a 5-7.5 HP systems\u003c\/li\u003e\n\u003cli\u003e30 CFM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEasy To Install\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUses 120V single-phase power, no special wiring needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdded Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAuto Drain System\u003c\/li\u003e\n\u003cli\u003eRefrigerant Pressure Gauge\u003c\/li\u003e\n\u003cli\u003eOutlet Air Baffle Heater\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eALL THIS PAIRED WITH EMAX’S  5-YEAR WARRANTY SHOULD NOT ONLY GIVE YOU, OUR CUSTOMER, COMPLETE CONFIDENCE IN OUR PRODUCT – BUT ALSO IN OUR COMMITMENT TO EXCELLENCE IN QUALITY, SUPPORT AND SERVICE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**NOTE THIS PACKAGE DOES NOT COME WITH HYDRAULIC HOSE OF CONNECTION LINE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"TablePress\" data-table=\"10573\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":31470749974551,"sku":"ESP07V080V1PK","price":6566.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot_513.png?v=1682101795"},{"product_id":"emax-industrial-175-psi-38-cfm-belt-drive-silent-air-system-80-gallon-1-phase-pressure-lubricated-v4-2-stage-10hp-electric-air-compressor","title":"EMAX Industrial 175 PSI @ 38 CFM Belt Drive 10HP 208-230V 1-Phase 2 Stage 80 gal. Stationary Electric Air Compressor - Silent Air System","description":"\u003ch3\u003e\u003cstrong\u003e10 HP Air Compressor, 2 Stage,Pressure Lubricated V4, 1 Phase, 80 Gallon, Vertical, Silent Air System, Industrial\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSilent Air Quiet Air Compressor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered and manufactured in the U.S.A.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cem\u003eThe whisper series compressors\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ereduce stationary compressor DBA ratings by as much as 25%!  A noise suppression device was first conceived by EMAX engineers after feedback from competitor compressor users revealed a large number of complaints regarding the extreme noise level of their compressors in a work environment.   Stationary air compressor noise levels typically require owners to incur the added expense of a building or structure to house the compressor in an attempt to reduce noise in the work environment.  \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cem\u003eThe Whisper\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003ecan be installed and operated in\u003cem\u003e\u003cspan\u003e \u003c\/span\u003eall\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eGarage, Farm Shop, and Industrial applications which eliminate the need for traditionally expensive and often inadequate separate buildings or structures to house the air compressor.  The Whisper silent air systems are already installed on the back of the tank with brackets that are fabricated for easy removal and low profile.\u003c\/p\u003e\n\u003cp\u003eThe Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and pre-filter media within the silencer cabinet.  As a result, the piston intake noise is trapped and dissipated within the silencer structure. As a result, the piston intake noise is trapped and dissipated within the silencer structure. It also acts as a secondary filtration for cleaner air.\u003c\/p\u003e\n\u003cp\u003eOur Industrial Series offers all the same quality and durability as our Plus series without all the extra cost of added features. We offer this series so that anyone can afford to have an EMAX Compressor.\u003c\/p\u003e\n\u003cp\u003eThis Industrial  10 HP 2 Stage Inline 1 Phase Vertical 80 Gallon Piston Air Compressor is designed for up to 50,000 hours  industrial use with proper maintenance. This unit features our low RPM pumps and delivers 38 SCFM @ 100 PSI. Our unit features automatic or continuous run functionality and is\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eSUPER COOL \u0026amp; SUPER QUIET!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePatented Pressure Lubricated 2-stage cast iron pump with dual control design allows for automatic or continuous run rated at up to 70,000 hours based on B-10 bearing life rating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"wp-image-2588 alignleft\" src=\"https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON.jpg\" alt=\"2-stage-pump-icon\" width=\"120\" height=\"120\" srcset=\"https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON.jpg 288w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-100x100.jpg 100w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-150x150.jpg 150w, https:\/\/emaxcompressor.com\/wp-content\/uploads\/2016\/08\/2-Stage-Pump-ICON-160x160.jpg 160w\" sizes=\"(max-width: 120px) 100vw, 120px\"\u003eAt the core of our Emax compressors is our pump. These pumps are\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eSUPER quiet\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ein operation and built to last!  We start with a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003esolid cast iron crankcase\u003c\/strong\u003e\u003c\/em\u003e. Unlike some competitor’s aluminum body crankcases – our solid cast iron crankcase will ensure stable crankshaft alignment and will handle more work load under heavy load conditions.\u003c\/p\u003e\n\u003cp\u003eOur pump also features a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eprecision balanced solid cast iron crankshaft\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewith Timken-Style stainless steel roller bearings on the front and rear of the crankshaft to ensure smooth \u0026amp; efficient operation with less drag and less energy use.\u003c\/p\u003e\n\u003cp\u003eOur pumps also feature several other key components that ensure durability and performance!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll steel connecting rods with replaceable rod bearing inserts. This allows our rods to be rebuilt!  99% of our competitors now use “throw-away” aluminum connecting rods in their pumps that have no re-build capability.\u003c\/li\u003e\n\u003cli\u003eRe-usable oil filter\u003c\/li\u003e\n\u003cli\u003eOil Pressure Gauge\u003c\/li\u003e\n\u003cli\u003eEligible for lifetime pump warranty\u003c\/li\u003e\n\u003cli\u003eRemovable 100% cast iron cylinders. These solid cast iron cylinders are more stable under heavy workloads and do not warp from heat.  Most of our competitors are using aluminum cylinders with a pressed-in sleeve that warp under extreme heat.  This makes competitor pumps good for about a 40-50% duty cycle – while claiming a 100% duty cycle. Most of the pumps with aluminum cylinders have to be replaced in 1-2 years because they would not hold up under heavy use.  Not our Air pumps!  Our solid cast iron cylinders can “take the heat” and are designed to perform on heavy load demands.\u003c\/li\u003e\n\u003cli\u003eAll cast iron cylinder heads.  Cast iron heads are more durable and dependable for trouble free operation.\u003c\/li\u003e\n\u003cli\u003e“Disc valve design” intake and exhaust valves. Disc valves have been around for over 100 years and have been proven to perform.  Most of our competitors are using “throw-away” reed valves which are not nearly as durable and can’t be re-built. Our disc valves come right out of the top of the cylinder head where they can be serviced in minutes instead of hours like reed valves.\u003c\/li\u003e\n\u003cli\u003eTop quality compression and oil rings.  Our rings ensure performance with low oil carry over (1-5 PPM).\u003c\/li\u003e\n\u003cli\u003ePrecision ground pistons machined to tight tolerances ensures low oil carry over.\u003c\/li\u003e\n\u003cli\u003ePremium “non-absorbent” gaskets prevent oil seepage from pump.\u003c\/li\u003e\n\u003cli\u003eAll cast iron flywheel with built-in fan.  The extra weight of our cast iron flywheel during run cycle gives the pump more “throw” on the compression stroke which will result in fewer loads on the electric motor.  Some manufacturers use aluminum flywheels that do not have the proper weight ratio to give the proper throw on the compression stroke when the pump is running.\u003c\/li\u003e\n\u003cli\u003eBuilt-in head unloaders. These unloaders are built into the intake valve assembly on the compressor head and perform a valuable function. They unload or open the intake valves under constant run applications.  This feature reduces internal pump heat from compression because the intake valve is held open throughout the unloading cycle. This allows fresh air to come into the cylinder chamber.  Under the compression stroke, the unloader holds the intake valve open allowing the air to blow back out the intake filter. This fresh air absorbs the heat out of the pump under heavy workloads.\u003c\/li\u003e\n\u003cli\u003eBuilt-in inter-cooler and after-coolers.  The inter-cooler allows air to be cooled between stages while the air cooled after-cooler provides a second cooling stage that cools the air before it goes into the tank.  Our after-cooler also includes an all copper main feed line from the pump into the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line …\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot only do we have one of the highest quality, most durable compressor pumps in the industry … but we have one of the lowest RPM compressor pumps on the market. \u003cem\u003e\u003cstrong\u003eThat’s the Emax difference!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePump RPM is a very critical factor in both performance and longevity.  For that reason, on most of our compressors, we normally “GO BIG” over-sizing our pumps and running them at lower RPMs than most manufacturers.  Our bigger, low RPM pump can still yield a high CFM output because both our bore and stroke are bigger.  Not only do you get the big CFM output, but the lower RPM operation also reduces friction and heat buildup to extend pump life!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNAME BRAND ELECTRIC MOTOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese units have name brand OPD (open drip motors) on them. They carry a 5 Year warranty.\u003c\/p\u003e\n\u003cp\u003eIt is most important to note that all of our motors are low RPM motors\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(1750 rpm)\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e… most manufacturers now use higher RPM motors (3450 rpm). 1750 RPM motors run much cooler than 3450 RPM motors because of the higher torque factor. They also yield low harmonic distortion, provide much higher torque in cold weather starting and require less electricity under start up.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdditional Motor Features:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 1-3\/8” output shaft\u003c\/li\u003e\n\u003cli\u003eHigh quality ball bearings on the front and rear of the motor shaft\u003c\/li\u003e\n\u003cli\u003eLarge starting and running capacitors\u003c\/li\u003e\n\u003cli\u003e15 Service Factor load. This means the motor can be pulled 15% over full load for more break horsepower\u003c\/li\u003e\n\u003cli\u003eDynamically balanced armature for low vibration levels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBELT GUARD\u003c\/strong\u003eWe at Emax Compressor are always concerned about durability and about your safety in everything we build. Our belt guards are no exception.  Built right here in the USA with\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cb\u003e13 G steel and premium grade expanded metal\u003c\/b\u003e,\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewe manufacture our belt guards to be tougher than any you will find in the industry today.  For your safety, our belt guards are OSHA approved.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCondor Switch\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis unit has a\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eprewired condor starter and pressure switch built into one\u003c\/strong\u003e\u003c\/em\u003e. Features an actuation- type diaphragm.\u003c\/p\u003e\n\u003cdiv id=\"body-main\" class=\"grainger one-column \"\u003e\n\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"content\"\u003e\n\u003cdiv id=\"body\"\u003e\n\u003cdiv id=\"main-content\"\u003e\n\u003cdiv id=\"productPage\" class=\"productPage\"\u003e\n\u003cdiv id=\"additionalInfoSection\" class=\"additionalInfoSection productPageSection\"\u003e\n\u003cdiv id=\"copyTextSection\" class=\"copyTextSection\"\u003eactuation-type diaphragm\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIR TANK\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eWe at Emax  are always concerned about durability and about your safety in everything we build.  Along with this philosophy, our air tanks are manufactured right here in the USA and are\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e\u003cstrong\u003eASME code compliant\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ein 50 states including California.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCONTROLS \u0026amp; COMPONENTS\u003c\/strong\u003eWe at Emax Compressor use only top quality components on our compressors.\n\u003cul\u003e\n\u003cli\u003eTop quality pressure switches with an adjustable screw which allows you to adjust your pressure higher or lower.\u003c\/li\u003e\n\u003cli\u003e100% brass check valves with Teflon Seating.  All check valves on our compressors are all brass with a Teflon seating. This reduces tank noise when the compressor is running because the Teflon seating is much quieter than other materials and insulates noise when valves are opening and closing during the compression stage.\u003c\/li\u003e\n\u003cli\u003e100% brass ASME safety valves.  For your safety all safety valves are 100% brass and comply to ASME code. Valves are preset and sealed for correct settings.  In the event that your compressor would not turn off, our safety valves open keeping compressor from building too high of a pressure level in the tank.  This will help to avoid the potential of tank rupture.\u003c\/li\u003e\n\u003cli\u003eTop quality plumbing fittings are used to maintain proper sealing when connected to the tank.\u003c\/li\u003e\n\u003cli\u003eHigh quality 100% brass ball valves are used for turning air on and off from the air receiver.\u003c\/li\u003e\n\u003cli\u003eExtended tank water drain pipe plumbed out the front of the unit with a ¼” ball valve handle for easy tank draining.  Eliminates the hassle of draining the tank with the typical petcock style drain under the tank.\u003c\/li\u003e\n\u003cli\u003eLoad-less starting.  Thanks to built-in head un-loaders built into the intake valve assembly on the compressor head, “load-less” staring is built into this unit.  This unloads the pump so the pump will not start under direct head pressure. Without this feature, this will cause motor damage under starting cycle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOTOR PULLEY AND BELTS\u003c\/strong\u003eWe use taper lock style 2-groove pulleys (not single groove).  We also use dual 2-groove, B-Style belts to drive our pumps.  This combination is best for a couple of reasons.First, dual belts ensure long belt life and yield low vibration which makes for smoother, more quiet operation because the dual belts do not have to be as tight as with a single belt setup.  The tighter the belts (as with a single belt setup) the more load on the compressor pump and motor bearings which decreases the life of both.Second, our taper lock pulleys are much better than a fixed bore pulley with a set screw. A taper lock design will lock the pulley in position to the motor shaft allowing it not to loosen or move on the motor shaft.Our 5-year warranty should not only give you, our customer, complete confidence in our product – but also in our commitment to excellence in quality, support and service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"TablePress\" data-table=\"10574\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":31470800830487,"sku":"ES10V080V1","price":5297.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot_524.png?v=1682102277"},{"product_id":"emax-silent-industrial-plus-175-psi-38-cfm-belt-drive-10-hp-1-phase-80-gal-vertical-air-compressor-with-58-cfm-dryer-bundle-w-pressure-lube-pump","title":"EMAX Silent Industrial Plus 175 PSI @ 38 CFM Belt Drive 10 HP 1-Phase 80 gal. Vertical Air Compressor w\/ 58 CFM Dryer Bundle \u0026 Pressure Lube Pump","description":"\u003ch3\u003e\n\u003cstrong\u003e10 HP Air Compressor with 58 CFM Air Dryer, 1 Phase, Silent Air System, Piston\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eS\u003cem\u003e\u003cstrong\u003eilent Air Piston Air Compressor\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered and manufactured in the U.S.A. \u003cem\u003e\u003cstrong\u003eThe whisper series compressors\u003c\/strong\u003e\u003c\/em\u003e reduce stationary compressor DBA ratings by as much as 25%!  A noise suppression device was first conceived by EMAX engineers after feedback from competitor compressor users revealed a large number of complaints regarding the extreme noise level of their compressors in a work environment.   Stationary air compressor noise levels typically require owners to incur the added expense of a building or structure to house the compressor in an attempt to reduce noise in the work environment.   \u003cem\u003e\u003cstrong\u003eThe Whisper \u003c\/strong\u003e\u003c\/em\u003ecan be installed and operated in\u003cem\u003e all\u003c\/em\u003e Garage, Farm Shop, and Industrial applications which eliminate the need for traditionally expensive and often inadequate separate buildings or structures to house the air compressor.  The Whisper silent air systems are already installed on the back of the tank with brackets that are fabricated for easy removal and low profile.\u003c\/p\u003e\n\u003cp\u003eThe Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and pre-filter media within the silencer cabinet.  As a result, the piston intake noise is trapped and dissipated within the silencer structure. As a result, the piston intake noise is trapped and dissipated within the silencer structure. It also acts as a secondary filtration for cleaner air.\u003c\/p\u003e\n\u003cp\u003eEmax compressor has made it easier for you to select the equipment you need, whether you are working out of a garage or an industrial environment we have what you need. We have taken the guess work out of pairing the perfect refrigerated dryer by introducing our bundle packages. Emax has paired these dryers to fit the CFM requirements of the compressor you have chosen saving you time, money and giving you peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Bundle has our Emax Industrial Plus 10 HP 2 Stage V4 1 Phase Vertical 80 Gallon Piston Air Compressor is designed for up to 50,000 hours of commercial or industrial use with proper maintenance. We have paired it with our environmentally friendly 58CFM Refrigerated air dryer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eCOMPRESSOR PUMP\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt the core of our Emax compressors is our pump. These pumps are SUPER quiet in operation and built to last!  We start with a solid cast iron crankcase. Unlike some competitor’s aluminum body crankcases – our solid cast iron crankcase will ensure stable crankshaft alignment and will handle more work load under heavy load conditions.\u003c\/p\u003e\n\u003cp\u003eOur pump also features a precision balanced solid cast iron crankshaft with Timken-Style stainless steel roller bearings on the front and rear of the crankshaft to ensure smooth \u0026amp; efficient operation with less drag and less energy use.\u003c\/p\u003e\n\u003cp\u003eOur pumps also feature several other key components that ensure durability and performance!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll steel connecting rods with replaceable rod bearing inserts. This allows our rods to be rebuilt!  99% of our competitors now use “throw-away” aluminum connecting rods in their pumps that have no re-build capability.\u003c\/li\u003e\n\u003cli\u003eRemovable 100% cast iron cylinders. These solid cast iron cylinders are more stable under heavy workloads and do not warp from heat.  Most of our competitors are using aluminum cylinders with a pressed-in sleeve that warp under extreme heat.  Our solid cast iron cylinders can “take the heat” and are designed to perform on heavy load demands.\u003c\/li\u003e\n\u003cli\u003eAll cast iron cylinder heads.  Cast iron heads are more durable and dependable for trouble free operation.\u003c\/li\u003e\n\u003cli\u003e“Disc valve design” intake and exhaust valves. Disc valves have been around for over 100 years and have been proven to perform.  Most of our competitors are using “throw-away” reed valves which are not nearly as durable and can’t be re-built. Our disc valves come right out of the top of the cylinder head where they can be serviced in minutes instead of hours like reed valves.\u003c\/li\u003e\n\u003cli\u003eTop quality compression and oil rings.  Our rings ensure performance with low oil carry over (1-5 PPM).\u003c\/li\u003e\n\u003cli\u003ePrecision ground pistons machined to tight tolerances ensures low oil carry over.\u003c\/li\u003e\n\u003cli\u003ePremium “non-absorbent” gaskets prevent oil seepage from pump.\u003c\/li\u003e\n\u003cli\u003eAll cast iron flywheel with built-in fan.  The extra weight of our cast iron flywheel during run cycle gives the pump more “throw” on the compression stroke which will result in fewer loads on the electric motor.\u003c\/li\u003e\n\u003cli\u003eBuilt-in head unloaders.  This feature reduces internal pump heat from compression because the intake valve is held open throughout the unloading cycle. This allows fresh air to come into the cylinder chamber.  Under the compression stroke, the unloader holds the intake valve open allowing the air to blow back out the intake filter. This fresh air absorbs the heat out of the pump under heavy workloads.\u003c\/li\u003e\n\u003cli\u003eBuilt-in inter-cooler and after-coolers.  The inter-cooler allows air to be cooled between stages while the air cooled after-cooler provides a second cooling stage that cools the air before it goes into the tank.  Our after-cooler also includes an all copper main feed line from the pump into the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eBOTTOM LINE …\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot only do we have one of the highest quality, most durable compressor pumps in the industry … but we have one of the lowest RPM compressor pumps on the market. That’s the Emax difference!\u003c\/p\u003e\n\u003cp\u003ePump RPM is a very critical factor in both performance and longevity.  For that reason, on most of our compressors, we normally “GO BIG” over-sizing our pumps and running them at lower RPMs than most manufacturers.  Our bigger, low RPM pump can still yield a high CFM output because both our bore and stroke are bigger.  Not only do you get the big CFM output, but the lower RPM operation also reduces friction and heat buildup to extend pump life!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eRAISED MOUNTING PLATFORM\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur raised pump platform design is a nice feature for keeping your oil cool within the pump.  This platform raises the pump approximately 2” off the mounting base plate.  This allows for 100% constant flow of cool air from the flywheel fan to circulate by not only the top \u0026amp; sides of the pump crankcase, but also opens the underside of the crankcase to cooling air flow.  This ensures cooler oil temperatures within your pump.  Cooler oil not only helps to lubricate the pump but also pulls the heat off the pistons and connecting rods – reducing wear and adding many years of life to the compressor pump.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eBELT TENSIONER\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYour Emax compressor will come equipped with a proprietary design feature that will eliminate countless hours of maintenance and an equal amount of frustration.  Our Automatic Belt Tensioner will allow you to adjust the tension and alignment of your belts with ease and in just minutes.\u003c\/p\u003e\n\u003cp\u003eWith Emax Compressors Automatic Belt Tensioner maintenance on your belt tension and alignment is not a problem anymore.\u003c\/p\u003e\n\u003cp\u003eIt’s easy, you’ll just loosen the 4 bolts under the motor about 2 threads – turn the adjustment bolt on the end of the belt tensioner assembly using a ¾” wrench until desired tension alignment is achieved – re-tighten the 4 motor mount bolts – and you’re done.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eBELT GUARD\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt  EMAX Compressor we are always concerned about durability and about your safety in everything we build. Our belt guards are no exception.  Built right here in the USA with 13 G steel and premium grade expanded metal and powder coated to prevent rusting, we manufacture our belt guards to be tougher than any you will find in the industry today.  For your safety, our belt guards are OSHA approved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAIR TANK\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe at Emax are always concerned about durability and about your safety in everything we build.  Along with this philosophy, our air tanks are manufactured right here in the USA and are ASME code compliant in 50 states including California.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDUAL TIMER AUTOMATIC TANK DRAIN\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmax’s Automatic Tank Drain with Integrated Dual Timer will do this maintenance for you automatically on the time intervals you set to ensure that the condensation is removed regularly to avoid all of this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eCONTROLS \u0026amp; COMPONENTS\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe at Emax Compressor use only top quality components on our compressors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop quality pressure switches with an adjustable screw which allows you to adjust your pressure higher or lower.\u003c\/li\u003e\n\u003cli\u003e100% brass check valves with Teflon Seating.\u003c\/li\u003e\n\u003cli\u003e100% brass ASME safety valves.  For your safety all safety valves are 100% brass and comply to ASME code.\u003c\/li\u003e\n\u003cli\u003eTop quality plumbing fittings are used to maintain proper sealing when connected to the tank.\u003c\/li\u003e\n\u003cli\u003eHigh quality 100% brass ball valves are used for turning air on and off from the air receiver.\u003c\/li\u003e\n\u003cli\u003eExtended tank water drain pipe plumbed out the front of the unit with a ¼” ball valve handle for easy tank draining.  Eliminates the hassle of draining the tank with the typical petcock style drain under the tank.\u003c\/li\u003e\n\u003cli\u003eThis unit has a \u003cstrong\u003e\u003cem\u003eprewired magnetic starter\u003c\/em\u003e\u003c\/strong\u003e.  A magnetic starter is necessary for any motor over 15 amps.\u003c\/li\u003e\n\u003cli\u003eThis greater amp load puts more load on the contacts.  A typical pressure switch will not handle this greater load, so a prewired magnetic starter is required.  The use of a magnetic starter gives you longer life on your controls because they are not overloaded and gives you trouble-free operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eCONTINUOUS RUN \u0026amp; AUTOMATIC START\/STOP\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmax Compressors come equipped with “continuous run” feature that maximizes performance and reduces wear on the internal components of your motor.\u003c\/p\u003e\n\u003cp\u003eUnder heavy workload applications such as sandblasting, your compressor can cycle on and off many times per hour.  This constant cycling is causing more wear on the magnetic contacts in the motor because they are arching as the motor starts and stops.\u003c\/p\u003e\n\u003cp\u003eIf your workload is over 50% – 60% duty cycle we recommend engaging the continuous run feature to eliminate this “start \u0026amp; stop” arching and wear and tear on the magnetic contactors in your motor.\u003c\/p\u003e\n\u003cp\u003eFor normal workloads in your shop, you can turn off the continuous run and the unit will go back to automatic start\/stop operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMOTOR PULLEY AND BELTS\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use taper lock style 2-groove pulleys (not single groove).  We also use dual 2-groove, B-Style belts to drive our pumps.  This combination is best for a couple of reasons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e58CFM REFRIGERATED AIR DRYER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur EMAX air dryer is the only energy efficient dryer systems with aluminum refrigerated air inner cooler. The air is filtered of all solid particles 0.01 micron and larger.  Clean, dry compressed air leaving the dryer minimizes maintenance and repair and also reduces internal dryer contamination. We designed them with Non-corrosive inner and after cooler. Our dryers feature stainless steel heat exchanger for maximum dryer life and less maintenance.  Emax Air dryers are UL-CSA approved scroll compressor \u0026amp; electric system for high efficiency and durability. They feature adjustable hot bypass for complete dryer function in low and high CFM flow preventing dryer freeze up.\u003c\/p\u003e\n\u003cp\u003eKeep Water, Oil, And Dirt Out of Your Compressed Air\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLess corrosion of pipes and tools means less downtime\u003c\/li\u003e\n\u003cli\u003eAvoid splotches \u0026amp; stains on your projects with proper filtration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnergy Efficient Aluminum Refrigerated Air Cooling System\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for maximum performance and efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRust Free, Stainless Steel Heat Exchanger\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum heat transfer, maximum dryer life \u0026amp; less maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRefrigerated Air Inlet Inner Cooler\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides trouble free operation for high temp cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnvironmentally Safe\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmentally friendly R134 Refrigerant\u003c\/li\u003e\n\u003cli\u003eAdjustable dual timer auto drain\u003c\/li\u003e\n\u003cli\u003eAluminum Plate Heat Exchanger with 10 year warranty\u003c\/li\u003e\n\u003cli\u003eBuilt in Pre-filter replaceable .005 Micron Filter\u003c\/li\u003e\n\u003cli\u003eActive Coalescing Filter with replaceable .001 micron filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompact And Efficient\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreat for a 10 HP system\u003c\/li\u003e\n\u003cli\u003e58 CFM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEasy To Install\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUses 120V single-phase power, no special wiring needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdded Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAuto Drain System\u003c\/li\u003e\n\u003cli\u003eRefrigerant Pressure Gauge\u003c\/li\u003e\n\u003cli\u003eOutlet Air Baffle Heater\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eALL THIS PAIRED WITH EMAX’S  5-YEAR WARRANTY SHOULD NOT ONLY GIVE YOU, OUR CUSTOMER, COMPLETE CONFIDENCE IN OUR PRODUCT – BUT ALSO IN OUR COMMITMENT TO EXCELLENCE IN QUALITY, SUPPORT AND SERVICE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**NOTE THIS PACKAGE DOES NOT COME WITH HYDRAULIC HOSE OF CONNECTION LINE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"TablePress\" data-table=\"10575\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":31470840021015,"sku":"ESP10V080V1PK","price":8147.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Gemini_Generated_Image_9cpu5w9cpu5w9cpu.png?v=1779823219"},{"product_id":"emax-premium-175-psi-38-cfm-belt-drive-two-stage-3-phase-10hp-20-gal-vertical-w-air-silencer-w-pressure-lube-pump-electric-air-compressor","title":"EMAX Silent Air System 2 Stage Pressure Lubricated 3 Phase 120 Gallon 10 HP Air Compressor","description":"This EMAX Industrial Plus 10 HP 2 Stage V4 3 Phase vertical 120 gal. Piston Air Compressor is designed for up to 70,000 hours of commercial or industrial use with proper maintenance. This unit delivers 38 SCFM @ 100 PSI, top PSI of 175. Our unit features industrial TEFC electric motors, magnetic starters, automatic tank drain, powder coated ASME tank 200PSI rating, along with our continuous run functionality all paired with all cast iron 70,000 Hr. rated patented pressure lubricated reciprocating pump. This unit features our patented Whisper100 silent air system already installed. The Whisper100 dissipates compressor intake noise by channeling the intake air through a series of baffle plates. This low-profile system adds 4 levels of air filtration along with making the compressor quiet, lowering the decibels by more than 35%. All backed by the warranty in the industry!\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Pressure Lubircated 2-stage cast iron pump with dual control design allows for automatic or continuous run rated at up to 70,000 hours based on B-10 bearing life rating\u003c\/li\u003e\n\u003cli\u003eContinuous mode functionality for workloads over 50% duty cycle eliminates wear and tear on your magnetic contactor\u003c\/li\u003e\n\u003cli\u003eBelt tension adjustor for fast, easy one-turn design reduces vibration and extends belt life\u003c\/li\u003e\n\u003cli\u003eAuto tank drain 110-volt dual timer controlled, eliminates daily maintenance\u003c\/li\u003e\n\u003cli\u003eSilent Air Technology\u003c\/li\u003e\n\u003cli\u003eETL Certified\u003c\/li\u003e\n\u003cli\u003e208\/230\/460 Volt Option Available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"TablePress\" data-table=\"10585\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":39257539379391,"sku":"ESP10V120V3","price":5199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot_506.png?v=1682101386"},{"product_id":"industrial-air-4-7-hp-single-stage-hi-flo-3-cylinder-replacement-air-compressor-pump-16-1-cfm-40-psi","title":"Industrial Air 4.7-HP Single-Stage Hi-Flo 3-Cylinder Replacement Air Compressor Pump (16.1 CFM @ 40 PSI)","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCast Iron Single Stage Hi-Flo 3-Cylinder Replacement Pump\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eProduces 4.7 running horsepower\u003cbr data-mce-fragment=\"1\"\u003eMounting pattern 8.43\" W x 5.19\" D (Depth)\u003cbr data-mce-fragment=\"1\"\u003e4 bolting holes; 0.354 diameter per hole\u003cbr data-mce-fragment=\"1\"\u003eProvides maximum performance and efficiency\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHigh Performance 3 Cylinder Hi-Flo Pump\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eDevelops 16.1 CFM at 40 PSI \u0026amp; 14 CFM @ 90 PSI\u003cbr data-mce-fragment=\"1\"\u003e3 large canister style air filters\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1250 Maximum RPM\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eDelivers high performance \u0026amp; longevity\u003cbr data-mce-fragment=\"1\"\u003e\"A\" (width) single v-belt\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAutomotive-Style Ball Bearings\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eProvide optimum performance \u0026amp; extended pump life\u003cbr data-mce-fragment=\"1\"\u003eOffers reliable stainless steel reed valves\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eRugged Cast Iron Flywheel \u0026amp; Crankcase\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eBalanced for best performance \u0026amp; durability\u003cbr data-mce-fragment=\"1\"\u003e12\" Flywheel diameter\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEasy-To-Read Oil Level Sight Gauge\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eMonitor pump oil level at a glance\u003cbr data-mce-fragment=\"1\"\u003e33 oz. capacity oil reservoir (Pump oil not included)\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eIndustrial Air, Magna Force, Powermate, Sanborn, Porter Cable and DeWalt\u003cbr data-mce-fragment=\"1\"\u003ePump is not a direct replacement for any other brand\u003c\/p\u003e\n\u003cdiv class=\"TablePress\" data-table=\"16244\"\u003e\u003c\/div\u003e","brand":"Industrial Air","offers":[{"title":"Default Title","offer_id":38102036644031,"sku":"040-0348RP","price":626.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/air-compressor-parts-040-0348-64_600_1.jpg?v=1612367702"},{"product_id":"industrial-air-10-hp-2-stage-v-twin-replacement-air-compressor-pump-35-cfm-100-psi","title":"Industrial Air 10-HP 2-Stage V-Twin Replacement Air Compressor Pump (35 CFM @ 100 PSI)","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCast Iron 2-Stage Inline V-Twin Replacement Pump\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eProduces 10 running horsepower\u003cbr data-mce-fragment=\"1\"\u003eMounting patterns 12.9\" W x 9.4\" D (Depth)\u003cbr data-mce-fragment=\"1\"\u003e4 bolting holes; 0.55 diameter per hole\u003cbr data-mce-fragment=\"1\"\u003eProvides maximum performance and efficiency\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eImpressive 4 Cylinder Pump\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eDevelops 35 CFM at 100 PSI \u0026amp; 33.6 CFM @ 175 PSI\u003cbr data-mce-fragment=\"1\"\u003e175 maximum PSI\u003cbr data-mce-fragment=\"1\"\u003e2 large canister style air filters\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e800 Maximum RPM\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eDelivers high performance \u0026amp; longevity\u003cbr data-mce-fragment=\"1\"\u003e\"B\" (width) double v-belt\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAutomotive-Style Ball Bearings\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eProvide optimum performance \u0026amp; extended pump life\u003cbr data-mce-fragment=\"1\"\u003eOffers reliable stainless steel reed valves\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eRugged Cast Iron Flywheel \u0026amp; Crankcase\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eBalanced for best performance \u0026amp; durability\u003cbr data-mce-fragment=\"1\"\u003e12\" Flywheel diameter (23\" with fan)\u003cbr data-mce-fragment=\"1\"\u003eEasy-To-Read Oil Level Sight Gauge\u003cbr data-mce-fragment=\"1\"\u003eMonitor pump oil level at a glance\u003cbr data-mce-fragment=\"1\"\u003e104 oz. capacity oil reservoir (Pump oil not included)\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eIndustrial Air and DeWalt\u003cbr data-mce-fragment=\"1\"\u003ePump is not a direct replacement for any other brand\u003c\/p\u003e\n\u003cdiv class=\"TablePress\" data-table=\"16240\"\u003e\u003c\/div\u003e","brand":"Industrial Air","offers":[{"title":"Default Title","offer_id":38102952149183,"sku":"040-0446RP","price":1850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/127895_w_MainProductImage_Lg.jpg?v=1612373067"},{"product_id":"emax-industrial-plus-10hp-3ph-rotary-screw-air-compressor-cabinet-only-non-vfd","title":"EMAX Industrial Plus 10HP 208\/230\/460V - 3 Phase Rotary Screw Air Compressor (Cabinet Only-NON VFD)","description":"\u003cp data-mce-fragment=\"1\"\u003e10 HP Rotary Screw Air Compressor, 3 Phase-ERS0100003\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEach and every one of our rotary screw air compressors is built to exacting standards, to provide years of dependable service, under demanding conditions. And because we use only high-quality OEM components, we offer a full ten year warranty, on all of our rotary screw air compressors.\u003cbr\u003e\u003cbr\u003eThis 10 HP rotary screw air compressor offers a lot of functionality including a PLC that allows easy and intuitive scheduling and operation of the compressor. Paired with EMAX’s world-class customer support, after the sale, we’re certain this air compressor will meet your compressed air needs now and for years to come.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey Differences in Emax Rotary Screw Air Compressors\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExpert experience in the air industry\u003c\/li\u003e\n\u003cli\u003eInnovative product design\u003c\/li\u003e\n\u003cli\u003eHighest quality components\u003c\/li\u003e\n\u003cli\u003eProfessional workmanship\u003c\/li\u003e\n\u003cli\u003eOur commitment to excellence\u003c\/li\u003e\n\u003cli\u003eOur GUARANTEE to stand behind our product !\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRotary Screw Air System snapshot:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e45 CFM @ 100 PSI = max 145 PSI\u003c\/li\u003e\n\u003cli\u003eThree Phase Power = 208\/230\/460V Three phase\u003c\/li\u003e\n\u003cli\u003eDrive-Tek™ Design = Reduces energy demand up to 33%\u003c\/li\u003e\n\u003cli\u003eStandard Y-Delta Soft Start Motor = Provides reduced energy demand and amp draw on start up\u003c\/li\u003e\n\u003cli\u003eSpin-Tek™ Design = Unique easy access oil filters \u0026amp; air\/oil separators, Requires no tools to remove\/install saving time and money\u003c\/li\u003e\n\u003cli\u003ePrecision Engineered Rotary Air End = Highly efficient design provides maximum discharge\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Sound Attenuated Cabinet = Provides lower decibel operation than a typical rotary screw\u003c\/li\u003e\n\u003cli\u003eDesigned For Use With Stationary Air Receiver (Not Included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Heart of EMAX Rotary Screw:\u003cbr\u003e\u003cbr\u003eThe Airend is the most important part of your compressor, it is the heart of the machine that actually compresses the air.\u003c\/p\u003e\n\u003cp\u003ePremium Industrial Motors\u003cbr\u003eWe use only premium industrial name brand motors to run our compressors. Emax uses only low 1750 RPM motors.\u003c\/p\u003e\n\u003cp\u003eProgrammable Logic Controller\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAdjust Pressure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLow Oil Shutdown \u003c\/li\u003e\n\u003cli\u003eReverse Fault\u003c\/li\u003e\n\u003cli\u003eHigh Voltage Fault \u003c\/li\u003e\n\u003cli\u003eOver AMP Shut down \u003c\/li\u003e\n\u003cli\u003eClock and Date \u003c\/li\u003e\n\u003cli\u003eLight \u003c\/li\u003e\n\u003cli\u003eParameters\u003c\/li\u003e\n\u003cli\u003eHour meter\u003c\/li\u003e\n\u003cli\u003eFault History \u003c\/li\u003e\n\u003cli\u003eMaintenance Service \u003c\/li\u003e\n\u003cli\u003eAir Differential Control\u003c\/li\u003e\n\u003cli\u003eBuilt in Timer \u003c\/li\u003e\n\u003cli\u003eOn- line demand\u003c\/li\u003e\n\u003cli\u003eWarranty – These PLC’s carry a 5 year warranty\u003c\/li\u003e\n\u003cli\u003eDaily \/ weekly Schedule\u003c\/li\u003e\n\u003cli\u003eSelf Start \u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaster Slave\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe BEST Warranty Around!\u003cbr\u003eEmax Compressor backs all their compressors with the best warranty in the industry. Emax Compressor gives their Rotary screw Pump a full 10 year warranty, 5 year on the motor and all other components ! The warranty is NOT pro-rated. We cover labor for the first 12 months for major repairs.With our warranty we don’t ask you to buy a service plan or extended warranty, we just ask that you purchase and use our oil and filters. This ensures the correct oil with the specs needed to run our pumps is used. Our trained service and support team is ready if you ever need them and we carry a full line of new replacement parts.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"TablePress\" data-table=\"16983\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":39266624012479,"sku":"ERS0100003","price":9404.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/7.5Rotary_c62eb10c-2771-4e95-8f1a-ebfe6f4dc97e.jpg?v=1614442135"},{"product_id":"emax-industrial-plus-10hp-1ph-rotary-screw-air-compressor-cabinet-only-non-vfd","title":"EMAX Industrial Plus 10HP 208-230V 1-Phase Rotary Screw Air Compressor  ( Cabinet Only-NON VFD )","description":"\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGrade: Commercial\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStyle: Rotary Screw 1-Phase\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCFM: 45\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTank Size: 0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRotary Screw Air System\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3-phase power drives \u003cspan data-mce-fragment=\"1\"\u003eIndustrial grade 1750RPM motor\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDrive-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces energy demand up to 33%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eStandard Y-Delta Soft Start Motor\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProvides reduced energy demand and amp draw on start up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePLC Controller - Advanced Maintenance Intelligence Monitor\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaintenance, temperature, oil level, filtration and hours\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRemote start\/stop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSpin-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnique easy access oil filters \u0026amp; air\/oil separators\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRequires no tools to remove\/install saving time and money\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrecision Engineered Rotary Air End\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly efficient design provides maximum discharge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHeavy Duty Sound Attenuated Cabinet\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProvides lower decibel operation than a typical rotary screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDesigned For Use With Stationary Air Receiver (Not Included)\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 year limited factory warranty on all electrical components\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e5 year limited factory warranty on cabinet \u0026amp; motor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10 yr. limited warranty on Air End Pump w\/purchase of service kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMust-Have Maintenance Kit To Keep Your EMAX Warranty In Force\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERVICEKIT001A Maintenance Kit required to validate warranty coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"TablePress\" data-table=\"16985\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":39266924265663,"sku":"ERS0100001","price":9864.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot_510.png?v=1682101661"},{"product_id":"emax-industrial-plus-10hp-208-230-460v-3-phase-rotary-screw-air-compressor-mounted-on-80-gal-tank-no-dryer","title":"EMAX Industrial Plus 10HP 208\/230\/460V - 3 Phase Rotary Screw Air Compressor - Mounted on 80 gal. Tank (no dryer)","description":"\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGrade: Commercial\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStyle: Rotary Screw 3-Phase\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCFM: 45\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTank Size: 80\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltra-Quiet Rotary Screw Operation\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDelivers enhanced reliability with ultimate energy efficiency\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eContinuous 100% duty cycle operates at normal conversation level\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrecision Engineered Rotary Air End\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly efficient design provides maximum discharge\u003c\/li\u003e\n\u003cli\u003eGerman built with 10-year warranty \u0026amp; 70,000 running hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eStandard Y-Delta Soft Start Motor\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRuns at 1750 RPM for less wear and tear\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces energy demand and amp draw on startup\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended Breaker: 3\u003cspan data-mce-fragment=\"1\"\u003e40 Amp @ 208\/230V - 20 Amp @ 460V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDrive-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces energy demand up to 33% for huge savings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighest quality components with professional workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrecision Engineered Rotary Air End\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly efficient design provides maximum discharge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGerman built with 10-year warranty \u0026amp; 70,000 running hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdvanced Programmable Logistic Controller\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to use remote with timed start\/stop and low oil shutdown\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMonitors maintenance, temperature, oil level, filtration, hours and much more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHeavy-Duty Sound Attenuated Cabinet\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOffers lower decibel rating with easy access to critical components\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e80-gallon ASME air tank receiver with timed automatic drain valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSpin-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnique tool-less oil filters \u0026amp; air\/oil separators\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGenuine Mann filters reduce air end contamination \u0026amp; harmful elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBest Warranty In The Industry\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERVICEKIT001A Maintenance Kit required to validate warranty coverage\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10-year limited warranty on rotary air end \u0026amp; motor with purchase of Maintenance Service Kit - all other components are 5-years, including PLC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"TablePress\" data-table=\"16987\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":39267709223103,"sku":"ERS0100803","price":9344.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/ERS0070801_7fb3827e-748c-41ce-894f-c738553b33cd.png?v=1614363249"},{"product_id":"emax-industrial-plus-10hp-208-230v-1-phase-rotary-screw-air-compressor-mounted-on-80-gal-tank-no-dryer","title":"EMAX Industrial Plus 10HP 208\/230V - 1 Phase Rotary Screw Air Compressor - Mounted on 80 gal. Tank (no dryer)","description":"\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGrade: Commercial\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStyle: Rotary Screw 1-Phase\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCFM: 45\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTank Size: 80\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltra-Quiet Rotary Screw Operation\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDelivers enhanced reliability with ultimate energy efficiency\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eContinuous 100% duty cycle operates at normal conversation level\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrecision Engineered Rotary Air End\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly efficient design provides maximum discharge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGerman built with 10-year warranty \u0026amp; 70,000 running hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eStandard Y-Delta Soft Start Motor\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRuns at 1750 RPM for less wear and tear\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces energy demand and amp draw on startup\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended Breaker: 3\u003cspan data-mce-fragment=\"1\"\u003e40 Amp \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDrive-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces energy demand up to 33% for huge savings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighest quality components with professional workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrecision Engineered Rotary Air End\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly efficient design provides maximum discharge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGerman built with 10-year warranty \u0026amp; 70,000 running hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdvanced Programmable Logistic Controller\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to use remote with timed start\/stop and low oil shutdown\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMonitors maintenance, temperature, oil level, filtration, hours and much more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHeavy-Duty Sound Attenuated Cabinet\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOffers lower decibel rating with easy access to critical components\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e80-gallon ASME air tank receiver with timed automatic drain valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSpin-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnique tool-less oil filters \u0026amp; air\/oil separators\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGenuine Mann filters reduce air end contamination \u0026amp; harmful elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBest Warranty In The Industry\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERVICEKIT001A Maintenance Kit required to validate warranty coverage\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10-year limited warranty on rotary air end \u0026amp; motor with purchase of Maintenance Service Kit - all other components are 5-years, including PLC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"TablePress\" data-table=\"16990\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":39267900555455,"sku":"ERS0100801","price":10389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/ERS0070801_23a613ec-4194-4f97-9967-4561c4d1420f.png?v=1614364792"},{"product_id":"emax-industrial-plus-10hp-208-230v-1-phase-rotary-screw-air-compressor-mounted-on-120-gal-tank-no-dryer","title":"EMAX Industrial Plus 10HP 208\/230V - 1 Phase Rotary Screw Air Compressor - Mounted on 120 gal. Tank (no dryer)","description":"\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGrade: Commercial\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStyle: Rotary Screw 1-Phase\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCFM: 45\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTank Size: 120\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltra-Quiet Rotary Screw Operation\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDelivers enhanced reliability with ultimate energy efficiency\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eContinuous 100% duty cycle operates at normal conversation level\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrecision Engineered Rotary Air End\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly efficient design provides maximum discharge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGerman built with 10-year warranty \u0026amp; 70,000 running hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eStandard Y-Delta Soft Start Motor\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRuns at 1750 RPM for less wear and tear\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces energy demand and amp draw on startup\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended Breaker: 3\u003cspan data-mce-fragment=\"1\"\u003e40 Amp \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDrive-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces energy demand up to 33% for huge savings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighest quality components with professional workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrecision Engineered Rotary Air End\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly efficient design provides maximum discharge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGerman built with 10-year warranty \u0026amp; 70,000 running hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdvanced Programmable Logistic Controller\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to use remote with timed start\/stop and low oil shutdown\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMonitors maintenance, temperature, oil level, filtration, hours and much more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHeavy-Duty Sound Attenuated Cabinet\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOffers lower decibel rating with easy access to critical components\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e80-gallon ASME air tank receiver with timed automatic drain valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSpin-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnique tool-less oil filters \u0026amp; air\/oil separators\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGenuine Mann filters reduce air end contamination \u0026amp; harmful elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBest Warranty In The Industry\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERVICEKIT001A Maintenance Kit required to validate warranty coverage\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10-year limited warranty on rotary air end \u0026amp; motor with purchase of Maintenance Service Kit - all other components are 5-years, including PLC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"TablePress\" data-table=\"16996\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":39268308353215,"sku":"ERS0101201","price":10875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/ERS0070801_58e4db5f-2e67-4228-86fb-1b69aa2f525f.png?v=1614369270"},{"product_id":"emax-industrial-plus-10hp-208-230-460v-3-phase-rotary-screw-air-compressor-mounted-on-120-gal-tank-no-dryer","title":"EMAX Industrial Plus 10HP 208\/230\/460V - 3 Phase Rotary Screw Air Compressor - Mounted on 120 gal. Tank (no dryer)","description":"\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGrade: Commercial\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStyle: Rotary Screw 3-Phase\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCFM: 45\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTank Size: 12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltra-Quiet Rotary Screw Operation\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDelivers enhanced reliability with ultimate energy efficiency\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eContinuous 100% duty cycle operates at normal conversation level\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrecision Engineered Rotary Air End\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly efficient design provides maximum discharge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGerman built with 10-year warranty \u0026amp; 70,000 running hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eStandard Y-Delta Soft Start Motor\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRuns at 1750 RPM for less wear and tear\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces energy demand and amp draw on startup\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended Breaker: 3\u003cspan data-mce-fragment=\"1\"\u003e40 Amp @ 208\/230V - 20 Amp @ 460V\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDrive-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces energy demand up to 33% for huge savings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighest quality components with professional workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrecision Engineered Rotary Air End\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly efficient design provides maximum discharge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGerman built with 10-year warranty \u0026amp; 70,000 running hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdvanced Programmable Logistic Controller\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to use remote with timed start\/stop and low oil shutdown\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMonitors maintenance, temperature, oil level, filtration, hours and much more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHeavy-Duty Sound Attenuated Cabinet\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOffers lower decibel rating with easy access to critical components\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e80-gallon ASME air tank receiver with timed automatic drain valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSpin-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnique tool-less oil filters \u0026amp; air\/oil separators\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGenuine Mann filters reduce air end contamination \u0026amp; harmful elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBest Warranty In The Industry\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERVICEKIT001A Maintenance Kit required to validate warranty coverage\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10-year limited warranty on rotary air end \u0026amp; motor with purchase of Maintenance Service Kit - all other components are 5-years, including PLC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"TablePress\" data-table=\"16997\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":39268341350591,"sku":"ERS0101203","price":10972.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/ERS0070801_6e91fdd8-b1c7-4d2d-8c84-37763235a8bc.png?v=1614369677"},{"product_id":"emax-industrial-plus-10hp-208-230v-1-phase-direct-drive-rotary-screw-variable-speed-tankless-air-compressor-cabinet-only","title":"EMAX Industrial Plus 10HP 208\/230V 1 Phase Direct Drive Rotary Screw-Variable Speed Tankless Air Compressor (Cabinet Only)","description":"\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGrade: Commercial\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStyle: Rotary Screw 1-Phase\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCFM: 45\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTank Size: 0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eVariable Speed Rotary Screw Air System\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e208\/230V 1-phase power drives 1750 RPM motor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSaves money; great for industrial\/manufacturing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eStandard Y\/Delta Soft Start Motor\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProvides reduced energy demand \u0026amp; amp draw on start up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdvanced PLC Controller\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMonitors maintenance, temperature, oil level, filtration \u0026amp; hours\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAlso monitors remote start\/stop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSpin-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnique easy access oil filters \u0026amp; air\/oil separators\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo special tools to remove\/install saving time and money\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrecision Engineered Rotary Air End\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly efficient design provides maximum discharge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDrive-Tek\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces energy demand up to 33%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUltra Quiet Operation\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProvides lower 62 dBA operation than a typical rotary screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDesigned For Use With Stationary Air Receiver (Not Included)\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10 year\/ 5 year\/ 2 year limited Factory Warranty\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10- air end pump w\/service kit; 5- cabinet \u0026amp; motor; 2- electrical\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMust-Have Maintenance Kit To Keep Your EMAX Warranty In Force\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSERVICEKIT001A Maintenance Kit required to validate warranty coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned For Use With Stationary Air Receiver (Not Included)\u003c\/p\u003e\n\u003cdiv class=\"TablePress\" data-table=\"17014\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":39284451049663,"sku":"ERV0100001","price":11543.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/emax21_18268f1e-81a6-431b-b47b-f747617cb880.png?v=1614613840"},{"product_id":"emax-10hp-208-230-460v-3-phase-rotary-screw-swing-arm-s-n-58cfm-dryer-s-n-120-gal-horizontal-tank-black-w-auto-drain-hydraulic-hose","title":"EMAX Swingarm Design Air Compressor Package - 3 Phase 10 HP Rotary Screw Air Compressor","description":"\u003cp data-mce-fragment=\"1\"\u003eKey Differences in Emax Rotary Screw Air Compressors\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExpert experience in the air industry\u003c\/li\u003e\n\u003cli\u003eInnovative product design\u003c\/li\u003e\n\u003cli\u003eHighest quality components\u003c\/li\u003e\n\u003cli\u003eProfessional workmanship\u003c\/li\u003e\n\u003cli\u003eOur commitment to excellence\u003c\/li\u003e\n\u003cli\u003eOur GUARANTEE to stand behind our product !\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRotary Screw Air System snapshot:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e45\u003c\/span\u003e\u003cem\u003eCFM @ 100 PSI = max 145 PSI\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrive-Tek™ Design: Reduces energy demand up to 33%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Y-Delta Soft Start Motor: Provides reduced energy demand and amp draw on start up\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpin-Tek™ Design: Unique easy access oil filters \u0026amp; air\/oil separators, requires no tools to remove\/install saving time and money\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrecision Engineered Rotary Air End: Highly efficient design provides maximum discharge\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Sound Attenuated Cabinet: Provides lower decibel operation than a typical rotary screw\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for Use with Stationary Air Receiver (Not Included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Heart of EMAX Rotary Screw:\u003c\/p\u003e\n\u003cp\u003eTThe Airend is the most important part of your compressor, it is the heart of the machine that actually compresses the air. That is why here at, Emax Compressor we use only the best German and Finland name brand airends. Most airends are only good for up to 40,000 hours and then they need a complete overhaul, with our airends they are good for 70,000 running hours as long as the unit is maintenance routinely and the correct oil is used. EMAX Compressor Gives you a 10 year warranty on all their airends!\u003cbr data-mce-fragment=\"1\"\u003eAll Emax Air Rotary Screw air compressors are equipped with these state of the art screw airend compressors manufactured in Germany and Finland. These airends have precision-aligned back to back tapped roller bearings with close tolerances guarantee long life cycles and outstanding reliability. Each air end is tested to meet consistent high quality standards.\u003c\/p\u003e\n\u003cp\u003ePremium Industrial Motors\u003cbr\u003e\u003cbr\u003eWe use only premium industrial name brand motors to run our compressors. Emax uses only low 1750 RPM motors. We have chosen motors that come with the best certificates and quality assurances so we know that you are getting the best as well! We use High Efficiency motors constructed with superior materials, higher service factors, longer bearing lives, lower waste- heat output and less vibration. We also pass the motor warranty on to you for a full 5 year on single phase and a full 10 year on 3 phase!!\u003c\/p\u003e\n\u003cp\u003eReceiving Tank\u003cbr\u003e\u003cbr\u003eThese units comes mounted on a 120 gallon Horizontal painted receiving tank equipped with auto drain, hydraulic hoses and fittings.\u003cbr\u003e\u003cbr\u003eThese tanks are made in the USA and have ring based design to prevent cracking, Standard NPT ports, ASME, NBBI, \u0026amp; CRN approvals, they are rated up to 450 degrees F, and they are coated with anti-corrosive\/ rust prevention blended steel to increase the tanks life.\u003c\/p\u003e\n\u003cp\u003ePatented Swingarm Feature:\u003cbr\u003e\u003cbr\u003eThis feature makes for easy maintenance on your rotary screw. You simply take out the pin and swing your dryer to the side, having easy access to the door panel on your rotary screw. This feature also makes your entire system compact and takes up less floor space. This system is everything you need to run clean air in your shop!\u003c\/p\u003e\n\u003cp\u003e Programmable Logic Controller\u003c\/p\u003e\n\u003cp\u003eThese rotary’s are controlled by a user friendly Logika PLC (Programmable Logic Controller). This controller makes this unit bullet proof. These controllers have may many features that are extremely user friendly and easy to use.\u003c\/p\u003e\n\u003cp\u003eThe BEST Warranty Around!\u003cbr\u003e\u003cbr\u003eEmax Compressor backs all their compressors with the best warranty in the industry. Emax Compressor gives their Rotary screws a full 10 year warranty! The warranty is NOT pro-rated. We cover labor for the first 12 months for major repairs. With our warranty we don’t ask you to buy a service plan or extended warranty, we just ask that you purchase and use our oil and filters. This ensures the correct oil with the specs needed to run our pumps is used. Our trained service and support team is ready if you ever need them and we carry a full line of new replacement parts.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv class=\"TablePress\" data-table=\"22037\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":40845548781759,"sku":"ERSK100003","price":12599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot_500.png?v=1682100217"},{"product_id":"emax-10hp-208-230v-1-phase-rotary-screw-package-vsd-tank-dryer-included","title":"EMAX Swingarm Design Air Compressor Package - Single Phase Variable Speed 10 HP Rotary Screw Air Compressor (Tank \u0026 Dryer included)","description":"\u003cp data-mce-fragment=\"1\"\u003eFully Packaged 10-HP Rotary Screw Air System\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey Differences in Emax Rotary Screw Air Compressors\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExpert experience in the air industry\u003c\/li\u003e\n\u003cli\u003eInnovative product design\u003c\/li\u003e\n\u003cli\u003eHighest quality components\u003c\/li\u003e\n\u003cli\u003eProfessional workmanship\u003c\/li\u003e\n\u003cli\u003eOur commitment to excellence\u003c\/li\u003e\n\u003cli\u003eOur GUARANTEE to stand behind our product !\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRotary Screw Air System snapshot:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Phase Power: 208\/230V Single phase, variable speed\u003c\/li\u003e\n\u003cli\u003eDrive-Tek™ Design: Reduces energy demand up to 33%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Y-Delta Soft Start Motor: Provides reduced energy demand and amp draw on start up\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpin-Tek™ Design: Unique easy access oil filters \u0026amp; air\/oil separators, requires no tools to remove\/install saving time and money\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrecision Engineered Rotary Air End: Highly efficient design provides maximum discharge\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Sound Attenuated Cabinet: Provides lower decibel operation than a typical rotary screw\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for Use with Stationary Air Receiver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Heart of EMAX Rotary Screw:\u003c\/p\u003e\n\u003cp\u003eThe Airend is the most important part of your compressor, it is the heart of the machine that actually compresses the air. That is why here at, Emax Compressor we use only the best German and Finland name brand airends. Most airends are only good for up to 40,000 hours and then they need a complete overhaul, with our airends they are good for 70,000 running hours as long as the unit is maintenance routinely and the correct oil is used. EMAX Compressor Gives you a 10-year warranty on all their airends!\u003cbr\u003e\u003cbr\u003eAll Emax Air Rotary Screw air compressors are equipped with these state of the art screw airend compressors manufactured in Germany and Finland. These airends have precision-aligned back to back tapped roller bearings with close tolerances guarantee long life cycles and outstanding reliability. Each air end is tested to meet consistent high quality standards.\u003c\/p\u003e\n\u003cp\u003ePremium Industrial Motors\u003cbr\u003e\u003cbr\u003eWe use only premium industrial name brand motors to run our compressors. Emax uses only low 1750 RPM motors. We have chosen motors that come with the best certificates and quality assurances so we know that you are getting the best as well! We use High Efficiency motors constructed with superior materials, higher service factors, longer bearing lives, lower waste- heat output and less vibration. We also pass the motor warranty on to you for a full 5 year on single phase and a full 10 year on 3 phase!!\u003c\/p\u003e\n\u003cp\u003eReceiving Tank\u003cbr\u003e\u003cbr\u003eThese units comes mounted on a 120 gallon Horizontal painted receiving tank equipped with auto drain, hydraulic hoses and fittings.\u003cbr\u003e\u003cbr\u003eThese tanks are made in the USA and have ring based design to prevent cracking, Standard NPT ports, ASME, NBBI, \u0026amp; CRN approvals, they are rated up to 450 degrees F, and they are coated with anti-corrosive\/ rust prevention blended steel to increase the tanks life.\u003c\/p\u003e\n\u003cp\u003ePatented Swingarm Feature:\u003cbr\u003e\u003cbr\u003eThis feature makes for easy maintenance on your rotary screw. You simply take out the pin and swing your dryer to the side, having easy access to the door panel on your rotary screw. This feature also makes your entire system compact and takes up less floor space. This system is everything you need to run clean air in your shop!\u003c\/p\u003e\n\u003cp\u003eSave that energy!!\u003c\/p\u003e\n\u003cp\u003eProgrammable Logic Controller\u003c\/p\u003e\n\u003cp\u003eThese rotary’s are controlled by a user friendly Logika PLC (Programmable Logic Controller). This controller makes this unit bullet proof. These controllers have may many features that are extremely user friendly and easy to use.\u003c\/p\u003e\n\u003cp\u003eThe BEST Warranty Around!\u003cbr\u003e\u003cbr\u003eEmax Compressor backs all their compressors with the best warranty in the industry. Emax Compressor gives their Rotary screws a full 10 year warranty! The warranty is NOT pro-rated. We cover labor for the first 12 months for major repairs. With our warranty we don’t ask you to buy a service plan or extended warranty, we just ask that you purchase and use our oil and filters. This ensures the correct oil with the specs needed to run our pumps is used. Our trained service and support team is ready if you ever need them and we carry a full line of new replacement parts.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cdiv data-table=\"17029\" class=\"TablePress\"\u003e\u003c\/div\u003e","brand":"EMAX","offers":[{"title":"Default Title","offer_id":39285306720447,"sku":"ERVK100001","price":16197.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/5-10hp-swingarm-main-DSC_1025_52afae68-a9dd-4efa-a49e-27650d042c18.jpg?v=1614700523"},{"product_id":"baileigh-industrial-480v-3phase-60-hz-four-roll-plate-roll-120-x-5-mild-steel-capacity","title":"Baileigh Industrial 480V 3Phase 60 hz Four Roll Plate Roll. 120\" x .5\" Mild Steel Capacity","description":"\u003ch2\u003eDESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eBuilt with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehydraulic motors driving planetary gearboxes\u003c\/strong\u003e, this is one of the finest plate rolls on the market.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMade in Italy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand refined by years of research, it will last for decades.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e½”\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emild steel capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120”\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(10-foot) length.\u003c\/li\u003e\n\u003cli\u003eLarge 10 hp motor runs on\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e480-volt 3-phase\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003epower.\u003c\/li\u003e\n\u003cli\u003eAll 4 forming rolls are hardened and polished.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 central driven rolls\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eDual hydraulic motors and high-efficiency\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eplanetary gearboxes\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edirectly rotate the 2 driven rolls.\u003c\/li\u003e\n\u003cli\u003eFront rolls have independent hydraulic lifters that go in the orbital pattern.\u003c\/li\u003e\n\u003cli\u003eStabilizer torsion bar system keeps front rolls parallel to the top roll.\u003c\/li\u003e\n\u003cli\u003eFast and easy to use:\n\u003cul\u003e\n\u003cli\u003ePinch the plate between the 2 central driven rolls.\u003c\/li\u003e\n\u003cli\u003ePre-bend the leading edge.\u003c\/li\u003e\n\u003cli\u003eRoll the body of the part along with the trailing edge all in one direction and in one pass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate is pinched at all times\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eduring the rolling cycle, so there’s no chance to lose the position.\u003c\/li\u003e\n\u003cli\u003eConveniently\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emovable operator console\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith control panel.\u003c\/li\u003e\n\u003cli\u003eToggles on the console make it simple to control the roll movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 DROs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon the control panel show the front and back roll positions for repeatability.\u003c\/li\u003e\n\u003cli\u003eHydraulic system for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ematerial removal\u003c\/strong\u003e: yoke on top roll drops, allowing the roll to lift.\u003c\/li\u003e\n\u003cli\u003eIncludes conical bending system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-year parts warranty\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eComes with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003elifetime technical support\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eby phone from our in-house team of knowledgeable reps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available in a numerically controlled version, the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.baileigh.com\/plate-bending-machine-pr-10500-4nc\"\u003ePR-10500-4NC\u003c\/a\u003e, and a computer numerically controlled version\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.baileigh.com\/plate-bending-machine-pr-10500-4cnc\"\u003ePR-10500-4CNC\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eSPECIFICATIONS\u003c\/h2\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"data-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"first odd\"\u003e\n\u003cth class=\"label\"\u003etem Number\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003ePR-10500-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eRolling Cap. (Mild Steel)\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e.55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eForming Width\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e122\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eNumber of Rolls\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eDriven Rolls\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eTop Roll Dia.\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e11.4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eBottom Roll Dia.\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e10.6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eProgramming\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eRoll Speed\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e16 fpm. (5 mpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eUpper Roll Dia.\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e8.662\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eRoll Adjustment Back\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eHydraulic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eMotor\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e10 hp.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003ePower\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e480V \/ 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eShipping Weight\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e17600lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"last odd\"\u003e\n\u003cth class=\"label\"\u003eShipping Dimensions (Inches)\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e176\" x 58\" x 39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e* specifications subject to change without notice.\u003c\/p\u003e","brand":"Baileigh Industrial","offers":[{"title":"Default Title","offer_id":42357265105087,"sku":"BA9-1008483","price":128699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/pr10500-4-plateroll.jpg?v=1685798523"},{"product_id":"edwards-120-ton-ironworker-3-phase-575-volt-with-powerlink","title":"Edwards 120 Ton Ironworker 3 Phase, 575 Volt with PowerLink","description":"\u003ch2\u003e\u003cspan\u003eDESCRIPTION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eOur most powerful Ironworker, the 120 Ton, offers the largest capacity and most flexibility - created with heavy-duty Made in USA steel construction. This compact machine allows for fast and easy transitions between fabrication operations. The 5 Workstations include a punch, flat bar shear, angle shear, coper notcher, and Open Cavity that accepts 4 Attachments. Further customize the Ironworker to your projects with 12 additional Attachments and 15 Accessories. Other features include an electric foot pedal with integrated jog control and bright LED lights to increase visibility. In addition, the PowerLink™ System increases your capabilities by turning your Ironworker into a power source for our line of Hydraulic Tools. The longer stroke length and increased capacity provided by this Ironworker allow it to handle the most heavy-duty projects.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable electric stoke control\u003c\/li\u003e\n\u003cli\u003eAngle Shear blades have 2 corner radii for both thin and thick material and are made of precision tool steel with 2 cutting edges for extended life\u003c\/li\u003e\n\u003cli\u003eANSI B11.5-1988(02) Compliant Guarding\u003c\/li\u003e\n\u003cli\u003eETL Certified Controls\u003c\/li\u003e\n\u003cli\u003eFlat Bar Shear blades are made of precision machined, high-quality tool steel with 4 cutting edges for extended life\u003c\/li\u003e\n\u003cli\u003eIntegrated Lock-out\/Tag-out system with multiple location E-Stop (foot pedal \u0026amp; control panel) for added safety\u003c\/li\u003e\n\u003cli\u003eOptimized workstation heights for improved efficiency\u003c\/li\u003e\n\u003cli\u003ePunches are easily changeable, long-lasting and available from 1\/8\" to 4\" diameters along with square, oblong, hex, metric, and custom shapes\u003c\/li\u003e\n\u003cli\u003eVertical movement produces even pressure resulting in precise punching and shearing with minimal distortion that results in extended tooling life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSPECIFICATIONS\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Speed (RPM)\u003c\/td\u003e\n\u003ctd\u003e1770\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Max Capacity (In.)\u003c\/td\u003e\n\u003ctd\u003e1-1\/2 diam. in 1 mild steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Stroke (In.)\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Work Height (In.)\u003c\/td\u003e\n\u003ctd\u003e36-5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat Bar Shear Max Capacity 1\"\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat Bar Shear Max Capacity 1\/2\"\u003c\/td\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat Bar Shear Max Capacity (In.)\u003c\/td\u003e\n\u003ctd\u003e1\/2 x 24, 1 x 12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat Bar Shear Work Height (In.)\u003c\/td\u003e\n\u003ctd\u003e33-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat Bar Shear Max Round Capacity (In.)\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAngle Shear Max Capacity (In.)\u003c\/td\u003e\n\u003ctd\u003e6 x 6 x 1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAngle Shear Work Height (In.)\u003c\/td\u003e\n\u003ctd\u003e52-1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (Lbs.)\u003c\/td\u003e\n\u003ctd\u003e5500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoper Notcher Max Capacity (In.)\u003c\/td\u003e\n\u003ctd\u003e3 x 6 x 1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat Bar Shear Max Square (In)\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoper Notcher Work Height (In.)\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlat Bar Shear Max Round (In)\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic Pump (GPM)\u003c\/td\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Shut Height (In)\u003c\/td\u003e\n\u003ctd\u003e7-1\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePunch Open Height (In)\u003c\/td\u003e\n\u003ctd\u003e9-1\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulics (GPM)\u003c\/td\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating (Tons)\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir (Gal.)\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulics (PSI)\u003c\/td\u003e\n\u003ctd\u003e3800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydraulic Reservoir (Gal.)\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve Pressure (PSI)\u003c\/td\u003e\n\u003ctd\u003e3800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (In.)\u003c\/td\u003e\n\u003ctd\u003e60 x 60 x 84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor (HP)\u003c\/td\u003e\n\u003ctd\u003e10 HP 3 ~ 575V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Dimensions (L x W x H) (In.)\u003c\/td\u003e\n\u003ctd\u003e60 x 60 x 84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Amps\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions (L x W x H) (In.)\u003c\/td\u003e\n\u003ctd\u003e60 x 67 x 87\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGross Weight (Lbs)\u003c\/td\u003e\n\u003ctd\u003e5975\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e87.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e60.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5975.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e67.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Edwards Ironworkers","offers":[{"title":"Default Title","offer_id":42360509628607,"sku":"ED9-IW120-3P575-A","price":47617.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/edw-1203p575900_xl.jpg?v=1684546046"}],"url":"https:\/\/pittsburghsprayequip.com\/collections\/10-00-hp\/edwards-ironworkers.oembed","provider":"Pittsburgh Spray","version":"1.0","type":"link"}