{"title":"Hoists","description":"","products":[{"product_id":"tiger-lifting-tcb-0050-0-5-ton-capacity-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0050-30 0.5 ton Capacity 30-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594. \u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" alt=\"\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eA = 3.67\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eB = 2.60\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eC = 12.01\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eD = 2.05\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eE = 3.07\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF1 = 1.95\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF2 = 1.50\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267431796927,"sku":"TCB-0050-30-SC","price":828.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo.jpg?v=1683033155"},{"product_id":"tiger-lifting-tcb-0050-10-0-5-ton-capacity-10-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0050-10 0.5 ton Capacity 10-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eA = 3.67\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eB = 2.60\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eC = 12.01\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eD = 2.05\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eE = 3.07\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF1 = 1.95\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF2 = 1.50\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267442282687,"sku":"TCB-0050-10-SC","price":512.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_538b1dae-f678-4dca-8216-4542e7d13a69.jpg?v=1683033159"},{"product_id":"tiger-lifting-tcb-0050-15-0-5-ton-capacity-15-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0050-15 0.5 ton Capacity 15-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eA = 3.67\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eB = 2.60\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eC = 12.01\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eD = 2.05\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eE = 3.07\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF1 = 1.95\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF2 = 1.50\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267445067967,"sku":"TCB-0050-15-SC","price":577.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_af07e32b-9540-4ab4-8103-b639abfbec01.jpg?v=1683033164"},{"product_id":"tiger-lifting-tcb-0050-20-0-5-ton-capacity-20-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0050-20 0.5 ton Capacity 20-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" style=\"float: none;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eA = 3.67\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eB = 2.60\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eC = 12.01\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eD = 2.05\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eE = 3.07\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF1 = 1.95\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF2 = 1.50\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267446247615,"sku":"TCB-0050-20-SC","price":642.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_eeedb05c-4493-468e-8296-138b0efd9946.jpg?v=1683033168"},{"product_id":"tiger-lifting-tcb-0100-30-1-ton-capacity-30-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0100-30 1-ton Capacity 30-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eA = 3.67\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eB = 2.60\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eC = 13.39\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eD = 2.48\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eE = 3.43\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF1 = 1.10\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF2 = 1.78\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267461714111,"sku":"TCB-0100-30-SC","price":804.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_abc50ee4-15d0-48dc-ae9b-56d515fcc2e9.jpg?v=1759808569"},{"product_id":"tiger-lifting-tcb-0100-20-1-ton-capacity-20-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0100-20 1-ton Capacity 20-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eA = 3.67\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eB = 2.60\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eC = 13.39\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eD = 2.48\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eE = 3.43\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF1 = 1.10\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF2 = 1.78\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267462009023,"sku":"TCB-0100-20-SC","price":672.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_289d84ba-183d-4440-9f2f-e83bd2d42097.jpg?v=1683033177"},{"product_id":"tiger-lifting-tcb-0100-15-1-ton-capacity-15-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0100-15 1-ton Capacity 15-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eA = 3.67\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eB = 2.60\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eC = 13.39\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eD = 2.48\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eE = 3.43\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF1 = 1.10\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF2 = 1.78\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267462205631,"sku":"TCB-0100-15-SC","price":608.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_da1b6f2a-efed-47f6-81d2-d0a857ae8c3f.jpg?v=1683033182"},{"product_id":"tiger-lifting-tcb-0100-10-1-ton-capacity-10-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0100-10 1-ton Capacity 10-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eA = 3.67\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eB = 2.60\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eC = 13.39\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eD = 2.48\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eE = 3.43\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF1 = 1.10\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eF2 = 1.78\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267462238399,"sku":"TCB-0100-10-SC","price":542.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_cfe2bda7-68b5-40c2-975e-1e9706d4b31b.jpg?v=1759808570"},{"product_id":"tiger-lifting-tcb-0150-30-1-5-tons-capacity-30-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0150-30 1.5 tons Capacity 30-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.86\u003c\/div\u003e\n\u003cdiv\u003eB = 2.88\u003c\/div\u003e\n\u003cdiv\u003eC = 15.16\u003c\/div\u003e\n\u003cdiv\u003eD = 3.07\u003c\/div\u003e\n\u003cdiv\u003eE = 4.02\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.34\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.01\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267467579583,"sku":"TCB-0150-30-SC","price":1052.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_f02ae837-3570-4669-b3f5-df83e76950d4.jpg?v=1683033191"},{"product_id":"tiger-lifting-tcb-0150-20-1-5-tons-capacity-20-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0150-20 1.5 tons Capacity 20-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.86\u003c\/div\u003e\n\u003cdiv\u003eB = 2.88\u003c\/div\u003e\n\u003cdiv\u003eC = 15.16\u003c\/div\u003e\n\u003cdiv\u003eD = 3.07\u003c\/div\u003e\n\u003cdiv\u003eE = 4.02\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.34\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.01\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267467907263,"sku":"TCB-0150-20-SC","price":904.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_a1e06f43-6e7a-4c79-9af6-d4ea6a278acc.jpg?v=1683033195"},{"product_id":"tiger-lifting-tcb-0150-15-1-5-tons-capacity-15-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0150-15 1.5 tons Capacity 15-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.86\u003c\/div\u003e\n\u003cdiv\u003eB = 2.88\u003c\/div\u003e\n\u003cdiv\u003eC = 15.16\u003c\/div\u003e\n\u003cdiv\u003eD = 3.07\u003c\/div\u003e\n\u003cdiv\u003eE = 4.02\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.34\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.01\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267468071103,"sku":"TCB-0150-15-SC","price":828.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_fd4d1b23-0ef3-4567-8d8c-719da9ebec2f.jpg?v=1759808571"},{"product_id":"tiger-lifting-tcb-0150-10-1-5-tons-capacity-10-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0150-10 1.5 tons Capacity 10-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.86\u003c\/div\u003e\n\u003cdiv\u003eB = 2.88\u003c\/div\u003e\n\u003cdiv\u003eC = 15.16\u003c\/div\u003e\n\u003cdiv\u003eD = 3.07\u003c\/div\u003e\n\u003cdiv\u003eE = 4.02\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.34\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.01\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267468595391,"sku":"TCB-0150-10-SC","price":752.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_be9743f1-787e-47f1-a2ea-877a37a33e4d.jpg?v=1759808571"},{"product_id":"tiger-lifting-tcb-0200-30-2-tons-capacity-30-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0200-30 2 tons Capacity 30-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 16.54\u003c\/div\u003e\n\u003cdiv\u003eD = 3.43\u003c\/div\u003e\n\u003cdiv\u003eE = 4.45\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.38\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.09\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267469971647,"sku":"TCB-0200-30-SC","price":1183.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_1600d6ab-028c-4612-9f18-54419299de91.jpg?v=1683033207"},{"product_id":"tiger-lifting-tcb-0200-20-2-tons-capacity-20-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0200-20 2 tons Capacity 20-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 16.54\u003c\/div\u003e\n\u003cdiv\u003eD = 3.43\u003c\/div\u003e\n\u003cdiv\u003eE = 4.45\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.38\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.09\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267470102719,"sku":"TCB-0200-20-SC","price":1010.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_c660f012-83a6-40be-b635-51a9345b8e6d.jpg?v=1759808572"},{"product_id":"tiger-lifting-tcb-0200-15-2-tons-capacity-15-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0200-15 2 tons Capacity 15-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 16.54\u003c\/div\u003e\n\u003cdiv\u003eD = 3.43\u003c\/div\u003e\n\u003cdiv\u003eE = 4.45\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.38\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.09\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267470266559,"sku":"TCB-0200-15-SC","price":923.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_8ebb568c-8448-4d76-97cf-c22fef16aeb9.jpg?v=1683033218"},{"product_id":"tiger-lifting-tcb-0200-10-2-tons-capacity-10-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0200-10 2 tons Capacity 10-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at3.21.41AM_600x600.png?v=1678303450\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 16.54\u003c\/div\u003e\n\u003cdiv\u003eD = 3.43\u003c\/div\u003e\n\u003cdiv\u003eE = 4.45\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.38\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.09\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267470463167,"sku":"TCB-0200-10-SC","price":838.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_d6668509-f7e1-4a00-b1ba-e827ea8cae00.jpg?v=1759808572"},{"product_id":"tiger-lifting-tcb-0300-10-3-tons-capacity-10-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0300-10 3 tons Capacity 10-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 4.30\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 19.69\u003c\/div\u003e\n\u003cdiv\u003eD = 3.86\u003c\/div\u003e\n\u003cdiv\u003eE = 6.19\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.42\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.21\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267505393855,"sku":"TCB-0300-10-SC","price":1172.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_12d9acb6-b234-4986-903f-a4c5e792e6c6.jpg?v=1683033227"},{"product_id":"tiger-lifting-tcb-0300-15-3-tons-capacity-15-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0300-15 3 tons Capacity 15-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 4.30\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 19.69\u003c\/div\u003e\n\u003cdiv\u003eD = 3.86\u003c\/div\u003e\n\u003cdiv\u003eE = 6.19\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.42\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.21\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267505426623,"sku":"TCB-0300-15-SC","price":1284.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_e359e899-fb3e-4d8a-8476-c93c6465de47.jpg?v=1683033231"},{"product_id":"tiger-lifting-tcb-0300-20-3-tons-capacity-20-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0300-20 3 tons Capacity 20-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 4.30\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 19.69\u003c\/div\u003e\n\u003cdiv\u003eD = 3.86\u003c\/div\u003e\n\u003cdiv\u003eE = 6.19\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.42\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.21\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267505950911,"sku":"TCB-0300-20-SC","price":1401.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_813cc06d-bbdc-4826-a613-812dfb536d92.jpg?v=1683033235"},{"product_id":"tiger-lifting-tcb-0300-30-3-tons-capacity-30-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0300-30 3 tons Capacity 30-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 4.30\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 19.69\u003c\/div\u003e\n\u003cdiv\u003eD = 3.86\u003c\/div\u003e\n\u003cdiv\u003eE = 6.19\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.42\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.21\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267506180287,"sku":"TCB-0300-30-SC","price":1617.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_bf8966e8-06e7-45ca-ad24-ec95377725f0.jpg?v=1759808574"},{"product_id":"tiger-lifting-tcb-030t-30-3-tons-capacity-30-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-030T-30 3 tons Capacity 30-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.86\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 19.21\u003c\/div\u003e\n\u003cdiv\u003eD = 2.37\u003c\/div\u003e\n\u003cdiv\u003eE = 5.83\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.42\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.21\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267515322559,"sku":"TCB-030T-30-SC","price":1189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_c15064d4-bb62-4254-ae3c-021010297430.jpg?v=1683033247"},{"product_id":"tiger-lifting-tcb-030t-20-3-tons-capacity-20-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-030T-20 3 tons Capacity 20-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.86\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 19.21\u003c\/div\u003e\n\u003cdiv\u003eD = 2.37\u003c\/div\u003e\n\u003cdiv\u003eE = 5.83\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.42\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.21\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267516043455,"sku":"TCB-030T-20-SC","price":1298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_7ae8958f-0cd5-4c0b-a3a6-08f98b624612.jpg?v=1683033251"},{"product_id":"tiger-lifting-tcb-030t-15-3-tons-capacity-15-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-030T-15 3 tons Capacity 15-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.86\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 19.21\u003c\/div\u003e\n\u003cdiv\u003eD = 2.37\u003c\/div\u003e\n\u003cdiv\u003eE = 5.83\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.42\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.21\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267516174527,"sku":"TCB-030T-15-SC","price":1420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_0ba26769-1697-48e5-8343-9512054414cf.jpg?v=1759808575"},{"product_id":"tiger-lifting-tcb-030t-10-3-tons-capacity-10-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-030T-10 3 tons Capacity 10-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at4.48.11AM_600x600.png?v=1678308547\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.86\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 19.21\u003c\/div\u003e\n\u003cdiv\u003eD = 2.37\u003c\/div\u003e\n\u003cdiv\u003eE = 5.83\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.42\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.21\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267518828735,"sku":"TCB-030T-10-SC","price":1633.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_27dcf09e-0bd3-42c2-af6e-db6c09fcbf17.jpg?v=1683033259"},{"product_id":"tiger-lifting-tcb-0500-30-5-tons-capacity-30-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0500-30 5 tons Capacity 30-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at5.23.34AM_600x600.png?v=1678310650\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at5.23.34AM_600x600.png?v=1678310650\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 22.64\u003c\/div\u003e\n\u003cdiv\u003eD = 4.81\u003c\/div\u003e\n\u003cdiv\u003eE = 8.23\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.93\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.76\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267526168767,"sku":"TCB-0500-30-SC","price":2442.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_e1cbd233-ebb3-41b3-8d7f-6978c6f33e49.jpg?v=1759808575"},{"product_id":"tiger-lifting-tcb-0500-20-5-tons-capacity-20-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0500-20 5 tons Capacity 20-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at5.23.34AM_600x600.png?v=1678310650\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at5.23.34AM_600x600.png?v=1678310650\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 22.64\u003c\/div\u003e\n\u003cdiv\u003eD = 4.81\u003c\/div\u003e\n\u003cdiv\u003eE = 8.23\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.93\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.76\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267526365375,"sku":"TCB-0500-20-SC","price":2008.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_4a906a40-2eac-4af9-9dbd-92acfebc51a6.jpg?v=1683033267"},{"product_id":"tiger-lifting-tcb-0500-15-5-tons-capacity-15-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0500-15 5 tons Capacity 15-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at5.23.34AM_600x600.png?v=1678310650\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at5.23.34AM_600x600.png?v=1678310650\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 22.64\u003c\/div\u003e\n\u003cdiv\u003eD = 4.81\u003c\/div\u003e\n\u003cdiv\u003eE = 8.23\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.93\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.76\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267527839935,"sku":"TCB-0500-15-SC","price":1792.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_41e21db4-8ce8-4205-a5a0-a7cb254aaa94.jpg?v=1759808575"},{"product_id":"tiger-lifting-tcb-0500-10-5-tons-capacity-10-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0500-10 5 tons Capacity 10-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at5.23.34AM_600x600.png?v=1678310650\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.11\u003c\/div\u003e\n\u003cdiv\u003eC = 22.64\u003c\/div\u003e\n\u003cdiv\u003eD = 4.81\u003c\/div\u003e\n\u003cdiv\u003eE = 8.23\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.93\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.76\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42267528462527,"sku":"TCB-0500-10-SC","price":1572.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_47f3b414-febb-4dc5-950c-b2ba98134c5c.jpg?v=1759808576"},{"product_id":"tiger-lifting-tcb-0600-15-6-tons-capacity-15-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0600-15 6 tons Capacity 15-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.04.55PM_600x600.png?v=1678359928\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.04.55PM_600x600.png?v=1678359928\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 25.00\u003c\/div\u003e\n\u003cdiv\u003eD = 3.39\u003c\/div\u003e\n\u003cdiv\u003eE = 8.67\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.93\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.76\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42268400320703,"sku":"TCB-0600-15-SC","price":2545.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_4563e269-4b50-4ab3-a2a6-df22f5df655b.jpg?v=1683033284"},{"product_id":"tiger-lifting-tcb-0600-30-6-tons-capacity-30-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0600-30 6 tons Capacity 30-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.04.55PM_600x600.png?v=1678359928\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.04.55PM_600x600.png?v=1678359928\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 25.00\u003c\/div\u003e\n\u003cdiv\u003eD = 3.39\u003c\/div\u003e\n\u003cdiv\u003eE = 8.67\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.93\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.76\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42268402254015,"sku":"TCB-0600-30-SC","price":3298.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_cf83d485-a6e1-4a06-b74f-8835e89d40c8.jpg?v=1683033290"},{"product_id":"tiger-lifting-tcb-0600-20-6-tons-capacity-20-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0600-20 6 tons Capacity 20-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.04.55PM_600x600.png?v=1678359928\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.04.55PM_600x600.png?v=1678359928\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 25.00\u003c\/div\u003e\n\u003cdiv\u003eD = 3.39\u003c\/div\u003e\n\u003cdiv\u003eE = 8.67\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.93\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.76\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42268403564735,"sku":"TCB-0600-20-SC","price":2797.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_8c77c7f4-f97c-40fb-9c52-3ce09fa869a4.jpg?v=1683033296"},{"product_id":"tiger-lifting-tcb-0600-10-6-tons-capacity-10-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0600-10 6 tons Capacity 10-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.04.55PM_600x600.png?v=1678359928\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 3.98\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 25.00\u003c\/div\u003e\n\u003cdiv\u003eD = 3.39\u003c\/div\u003e\n\u003cdiv\u003eE = 8.67\u003c\/div\u003e\n\u003cdiv\u003eF1 = 1.93\u003c\/div\u003e\n\u003cdiv\u003eF2 = 2.76\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42268405104831,"sku":"TCB-0600-10-SC","price":2292.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_baebdfba-9908-4643-9231-9c736b51a268.jpg?v=1683033302"},{"product_id":"tiger-lifting-tcb-0800-30-8-tons-capacity-30-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0800-30 8 tons Capacity 30-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.15.50PM_600x600.png?v=1678360576\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.15.50PM_600x600.png?v=1678360576\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 4.30\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 24.02\u003c\/div\u003e\n\u003cdiv\u003eD = 6.03\u003c\/div\u003e\n\u003cdiv\u003eE = 10.36\u003c\/div\u003e\n\u003cdiv\u003eF1 = 2.05\u003c\/div\u003e\n\u003cdiv\u003eF2 = 3.07\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42268411265215,"sku":"TCB-0800-30-SC","price":4326.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_bb047764-961f-4aac-a740-1a3caddd589a.jpg?v=1683033307"},{"product_id":"tiger-lifting-tcb-0800-20-8-tons-capacity-20-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0800-20 8 tons Capacity 20-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.15.50PM_600x600.png?v=1678360576\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.15.50PM_600x600.png?v=1678360576\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 4.30\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 24.02\u003c\/div\u003e\n\u003cdiv\u003eD = 6.03\u003c\/div\u003e\n\u003cdiv\u003eE = 10.36\u003c\/div\u003e\n\u003cdiv\u003eF1 = 2.05\u003c\/div\u003e\n\u003cdiv\u003eF2 = 3.07\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42268412346559,"sku":"TCB-0800-20-SC","price":3508.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_042136be-bd8e-4f44-80f0-44c5a679cc6d.jpg?v=1759808577"},{"product_id":"tiger-lifting-tcb-0800-15-8-tons-capacity-15-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0800-15 8 tons Capacity 15-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.15.50PM_600x600.png?v=1678360576\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.15.50PM_600x600.png?v=1678360576\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 4.30\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 24.02\u003c\/div\u003e\n\u003cdiv\u003eD = 6.03\u003c\/div\u003e\n\u003cdiv\u003eE = 10.36\u003c\/div\u003e\n\u003cdiv\u003eF1 = 2.05\u003c\/div\u003e\n\u003cdiv\u003eF2 = 3.07\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42268415099071,"sku":"TCB-0800-15-SC","price":3424.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_00f547c3-a32e-4b24-9737-7b5b8f563038.jpg?v=1683033318"},{"product_id":"tiger-lifting-tcb-0800-10-8-tons-capacity-10-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-0800-10 8 tons Capacity 10-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg decoding=\"async\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" alt=\"\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.15.50PM_600x600.png?v=1678360576\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 4.30\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 24.02\u003c\/div\u003e\n\u003cdiv\u003eD = 6.03\u003c\/div\u003e\n\u003cdiv\u003eE = 10.36\u003c\/div\u003e\n\u003cdiv\u003eF1 = 2.05\u003c\/div\u003e\n\u003cdiv\u003eF2 = 3.07\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42268417261759,"sku":"TCB-0800-10-SC","price":2941.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_d74b6ce9-ab9b-4d80-b859-60e9ac5f01bf.jpg?v=1759808578"},{"product_id":"tiger-lifting-tcb-1000-10-10-tons-capacity-10-ft-std-lift-premium-chain-block-tcb-with-overload-protection","title":"Tiger Lifting TCB-1000-10 10 tons Capacity 10-ft Std. Lift Premium Chain Block TCB with Overload Protection","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe TCB is manufactured from the highest quality steel materials, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The exceptional short head room allows for easy installation. Using only the highest quality materials precisely machined in our own factory, the TCB is the ideal block for long term use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cp\u003e• DNV GL Verification tested according to NORSOK R-002\u003cbr\u003e• Range from 250kg – 35t\u003cbr\u003e• Available with forged clevis adaptor components\u003cbr\u003e• Patented Quad Cam Pawl System\u003cbr\u003e• Certified 2% light load protection\u003cbr\u003e• Rugged steel body construction, yet lightweight and portable\u003cbr\u003e• Double cover protection for brake chamber\u003cbr\u003e• Heat treated alloy steel triple spur gears and pinion shaft\u003cbr\u003e• Tested and certified for “fleeting”, “cross-hauling”, and “drifting” applications up to 45° from vertical without deration\u003cbr\u003e• Overload protection available\u003cbr\u003e• Also available with stainless steel load chain\u003cbr\u003e• Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003cbr\u003e• These units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003cbr\u003e• Operating temps -40°C - +80°C\u003c\/p\u003e\n\u003cp\u003eCertification:\u003c\/p\u003e\n\u003cp\u003eEach unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006\/42\/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.\u003c\/p\u003e\n\u003cp\u003ePatent Protected Quad Cam Brake Pawl System:\u003c\/p\u003e\n\u003cp\u003eThis patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROCB, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.\u003c\/p\u003e\n\u003cp\u003eBrake Efficiency:\u003c\/p\u003e\n\u003cp\u003eTiger uniquely uses an 8 point multi start thread pinion shaft which doubles the lead distance compared with typical 4 point threaded shafts, increasing the brake efficiency by 100%.\u003c\/p\u003e\n\u003cp\u003eChain End Stops:\u003c\/p\u003e\n\u003cp\u003eWill hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.\u003c\/p\u003e\n\u003cp\u003eOverload Protection:\u003c\/p\u003e\n\u003cp\u003eIf the chain block is fitted with a slipping clutch overload mechanism then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The PROCB with overload protection is DNV GL Verification tested according to NORSOK R-002.\u003c\/p\u003e\n\u003cp\u003eSafety Brake:\u003c\/p\u003e\n\u003cp\u003eThe highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The PROCB easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/p\u003e\n\u003cp\u003eLifting at Angles:\u003c\/p\u003e\n\u003cp\u003eThe PROCB range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person.\u003c\/p\u003e\n\u003cp\u003eWith a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.\u003c\/p\u003e\n\u003cp\u003eHand Wheel:\u003c\/p\u003e\n\u003cp\u003eFor chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.\u003cimg alt=\"\" src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\" decoding=\"async\" data-mce-src=\"https:\/\/tigerlifting.com\/\/media\/fqao4j4h\/201609-handwheel745a.jpg?width=243\u0026amp;height=182\u0026amp;mode=max\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdaptor Components:\u003c\/p\u003e\n\u003cp\u003eDrop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.\u003c\/p\u003e\n\u003cp\u003eSelf-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).\u003c\/p\u003e\n\u003cp\u003eHooks:\u003c\/p\u003e\n\u003cp\u003eOur hooks incorporate our patented “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.\u003c\/p\u003e\n\u003cp\u003eOur drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts \u0026amp; bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.\u003c\/p\u003e\n\u003cp\u003eAvailable with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.\u003c\/p\u003e\n\u003cp\u003eForgings:\u003c\/p\u003e\n\u003cp\u003eRecessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.\u003c\/p\u003e\n\u003cp\u003ePrecise tolerances in the bottom hook yokes means foreign objects are restricted from entering the load sheave area and chain can’t get twisted.\u003c\/p\u003e\n\u003cp\u003eCombination Trolley and Block:\u003c\/p\u003e\n\u003cp\u003eThe top hook can be replaced by a competent person so the PROCB can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom.\u003c\/p\u003e\n\u003cp\u003eTemperature Range:\u003c\/p\u003e\n\u003cp\u003eStandard operating temperature range -40°C to +80°C – far exceeding the requirements of current standards. Ultra-low operating temperature units (-60°C to +80°C) also available.\u003c\/p\u003e\n\u003cp\u003eLoad Chains:\u003c\/p\u003e\n\u003cp\u003eTiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. Our hoists are also available with stainless steel load chain.\u003c\/p\u003e\n\u003cp\u003eMechanical Efficiency:\u003c\/p\u003e\n\u003cp\u003eAll major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.\u003c\/p\u003e\n\u003cp\u003eChain Carriers:\u003c\/p\u003e\n\u003cp\u003eAvailable with chain bag as an option.\u003c\/p\u003e\n\u003cp\u003eEntertainment Rigging:\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish for the entertainment industry.\u003c\/p\u003e\n\u003cp\u003eDouble Cover Protection:\u003c\/p\u003e\n\u003cp\u003eBoth the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.\u003c\/p\u003e\n\u003cp\u003eFinish:\u003c\/p\u003e\n\u003cp\u003eThe PROCB is finished in our high-quality powder coat paint offering excellent corrosion protection\u003c\/p\u003e\n\u003cp\u003ePerformance:\u003c\/p\u003e\n\u003cp\u003eThe PROCB has undergone a full test program that includes:\u003c\/p\u003e\n\u003cp\u003eType Testing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltimate strength test, at least 4 times the Working Load Limit (WLL)\u003c\/li\u003e\n\u003cli\u003eContinuous cyclic testing of over 1500 cycles\u003c\/li\u003e\n\u003cli\u003eChain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest on every hoist\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProof loading at 1.5 times the rated capacity\u003c\/li\u003e\n\u003cli\u003eLight load testing at maximum of 2% rated capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Screenshot2023-03-09at7.15.50PM_600x600.png?v=1678360576\"\u003e\u003c\/div\u003e\n\u003cdiv\u003eDimensions (inches):\u003c\/div\u003e\n\u003cdiv\u003eA = 4.30\u003c\/div\u003e\n\u003cdiv\u003eB = 3.31\u003c\/div\u003e\n\u003cdiv\u003eC = 25.99\u003c\/div\u003e\n\u003cdiv\u003eD = 6.03\u003c\/div\u003e\n\u003cdiv\u003eE = 10.36\u003c\/div\u003e\n\u003cdiv\u003eF1 = 2.13\u003c\/div\u003e\n\u003cdiv\u003eF2 = 3.43\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42268439085247,"sku":"TCB-1000-10-SC","price":3032.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/procb-2t-general-web-photo_4c220142-5745-4d13-a7a0-9fba87acbde4.jpg?v=1683033346"},{"product_id":"tiger-lifting-ss20-0050-0-5-ton-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-0050  0.5-ton 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.67\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.60\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.01\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 2.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.07\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1.95\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1.50\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269855383743,"sku":"SS20-0050 ","price":485.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_28a0af0f-786b-4f5a-9235-e9c9f2fcdd77.png?v=1678445477"},{"product_id":"tiger-lifting-ss20-0100-1-0-ton-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-0100  1.0-ton 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions (inches)\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.67\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.60\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e13.39\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.48\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.43\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e0.95\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1.78\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269859119295,"sku":"SS20-0100","price":514.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM.png?v=1759808593"},{"product_id":"tiger-lifting-ss20-0150-1-5-ton-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-0150  1.5-ton 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions (inches)\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.86\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.16\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.07\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e4.02\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1.34\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.01\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269861085375,"sku":"SS20-0150","price":697.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_3a98b900-df48-43fc-bdf8-d978753b1244.png?v=1678445907"},{"product_id":"tiger-lifting-ss20-0200-2-tons-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-0200  2-tons 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions (in)\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.98\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.11\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e16.54\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.43\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e4.45\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1.38\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.09\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269862691007,"sku":"SS20-0200","price":773.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_67fa5a2a-37f4-454d-aac4-c518044652a9.png?v=1759808593"},{"product_id":"tiger-lifting-ss20-0300-3-0-tons-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-0300  3.0-tons 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDimensions (in)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e4.30\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e3.31\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e19.69\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e 3.86\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e6.19\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e1.42\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e2.21\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269866819775,"sku":"SS20-0300","price":1122.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_5f1f6e04-3903-45af-82c6-13c71b9b201a.png?v=1678446264"},{"product_id":"tiger-lifting-ss20-0500-5-0-tons-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-0500  5.0-tons 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDimensions (in)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.98\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.11\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e22.64\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e4.81\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e8.23\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1.93\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.76\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269869310143,"sku":"SS20-0500 ","price":1464.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_93cac4d5-533b-4b02-9390-37862db9a4bb.png?v=1678446403"},{"product_id":"tiger-lifting-ss20-0600-6-0-tons-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-0600 6.0-tons 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDimensions (in)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.98\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.31\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e25.00\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.39\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e8.67\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1.93\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.76\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269870915775,"sku":"SS20-0600","price":1900.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_8f1cccdd-b5e0-4c7c-9a40-a61f98c17514.png?v=1759808595"},{"product_id":"tiger-lifting-ss20-0800-8-0-tons-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-0800  8.0-tons 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDimensions (in)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e4.30\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.31\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e24.02\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.03\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e10.36\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.05\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269872718015,"sku":"SS20-0800","price":2705.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_18ec355c-4793-438b-ac43-4a529e52fb6d.png?v=1678446690"},{"product_id":"tiger-lifting-ss20-100-10-0-tons-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-100 10.0-tons 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDimensions (in)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e4.30\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.31\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e25.99\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e6.03\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e10.36\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.13\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.43\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269873963199,"sku":"SS20-1000","price":2843.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_8ac387fb-0829-41a4-928a-1db544d8d475.png?v=1759808595"},{"product_id":"tiger-lifting-ss20-1500-15-tons-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-1500  15-tons 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDimensions (in)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e4.30\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.31\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e33.07\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e8.86\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.89\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2.33\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269876027583,"sku":"SS20-1500","price":8328.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_5e17e4cd-1308-4c8a-bc69-40bc73691d45.png?v=1759808597"},{"product_id":"tiger-lifting-ss20-2000-20-tons-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-2000 20-tons 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDimensions (in)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e6.34\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.55\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e41.34\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5.83\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.18\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.19\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e4.33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269880123583,"sku":"SS20-2000","price":13843.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_8799d95e-af6a-48fa-ba53-7a85c30eb245.png?v=1759808597"},{"product_id":"tiger-lifting-ss20-3000-30-tons-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-3000  30-tons 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDimensions (in)\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"scrollable-wrapper\"\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\" style=\"height: 16px;\"\u003e\n\u003ctd style=\"text-align: center; height: 16px;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16px;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16px;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16px;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16px;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16px;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16px;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eF2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" style=\"height: 16.6035px;\"\u003e\n\u003ctd style=\"text-align: center; height: 16.6035px;\" data-mce-fragment=\"1\"\u003e8.67\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16.6035px;\" data-mce-fragment=\"1\"\u003e8.67\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16.6035px;\" data-mce-fragment=\"1\"\u003e47.25\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16.6035px;\" data-mce-fragment=\"1\"\u003e15.28\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16.6035px;\" data-mce-fragment=\"1\"\u003e15.28\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16.6035px;\" data-mce-fragment=\"1\"\u003e3.59\u003c\/td\u003e\n\u003ctd style=\"text-align: center; height: 16.6035px;\" data-mce-fragment=\"1\"\u003e5.32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269881237695,"sku":"SS20-3000","price":27428.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_6485e122-d097-4fb0-8e7c-4ae5d566c00a.png?v=1678447235"},{"product_id":"tiger-lifting-ss20-3500-35-tons-10-ft-std-lift-subsea-corrosion-resistant-chain-block-ss20-manual-chain-hoist","title":"Tiger Lifting SS20-3500  35-tons 10-ft. Std. Lift Subsea - Corrosion Resistant Chain Block SS20 (Manual Chain Hoist)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCorrosion Resistant Chain Block SS20\u003c\/p\u003e\n\u003cp\u003eWith the advantages of having been fully protected against corrosion, the SS20 is the ideal block for salt water use with less maintenance and servicing costs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in multi-immersion applications\u003c\/li\u003e\n\u003cli\u003eDNV GL Verification tested according to NORSOK R-002\u003c\/li\u003e\n\u003cli\u003eAvailable with slipping clutch overload protection\u003c\/li\u003e\n\u003cli\u003eRange from 0.5t - 30t\u003c\/li\u003e\n\u003cli\u003eOver 1000 hours continuous protection\u003c\/li\u003e\n\u003cli\u003eUnique corrosion protection of all the internal parts including load and hand chain, ensuring over 1000 hours continuous protection under ASTM B117 Salt spray conditions.\u003c\/li\u003e\n\u003cli\u003eMarine specific friction discs\u003c\/li\u003e\n\u003cli\u003eAvailable with forged clevis adaptor components\u003c\/li\u003e\n\u003cli\u003eDouble cover protection for brake chamber\u003c\/li\u003e\n\u003cli\u003eStainless steel fittings and fasteners\u003c\/li\u003e\n\u003cli\u003ePatented Quad Cam Pawl System\u003c\/li\u003e\n\u003cli\u003eSafety Brake: The highly efficient brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Tiger chain blocks easily pass the brake lock out test as per BS 3243:1990 with a 2% load of the rated capacity.\u003c\/li\u003e\n\u003cli\u003e-40°C to +50°C (-40°F to +122°F) Operating temperature range\u003c\/li\u003e\n\u003cli\u003eMarine chain bags available on request\u003c\/li\u003e\n\u003cli\u003eAlso available with stainless steel chain\u003c\/li\u003e\n\u003cli\u003eSpark resistant option available (See page 22-23)\u003c\/li\u003e\n\u003cli\u003eAvailable with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2\u003c\/li\u003e\n\u003cli\u003eThese units meet and exceed all the requirements within BS EN 13157:2004+A1:2009, ANSI\/ASME B30.16, AS1418.2 and SANS 1594.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tiger Lifting North America","offers":[{"title":"Default Title","offer_id":42269883072703,"sku":"SS20-3500","price":28939.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/Screenshot2023-03-10at6.46.06PM_52f4cb7e-7268-4377-9003-1565585e44cb.png?v=1759808598"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/collections\/825-287401.jpg?v=1665536156","url":"https:\/\/pittsburghsprayequip.com\/collections\/hoists\/2000-3500.oembed?page=3","provider":"Pittsburgh Spray","version":"1.0","type":"link"}