{"title":"Voltage 440","description":null,"products":[{"product_id":"grizzly-industrial-37-15-hp-3-phase-drum-sander","title":"Grizzly Industrial 37\" 15 HP 3-Phase Drum Sander","description":"\u003ch2 data-mce-fragment=\"1\"\u003eA three-phase drum sander for industrial sanding.\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBuilt for production environments, the G0450 37\" 10 HP Drum Sander features industrial-quality conveyor belts and dual 6\" sanding drums.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe dual drum setup allows you to place different grits of sandpaper on each drum; cutting your sanding time in half. The sandpaper length needed is 6\" wide by 138\" long. For a full range of replacement paper for the G0450,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.grizzly.com\/search?q=DRUM+SANDER+ROLLS\u0026amp;fq=(width:%226+in.%22)(length:%2250+ft%22)\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.grizzly.com\/search?q=DRUM+SANDER+ROLLS\u0026amp;fq=(width:%226+in.%22)(length:%2250+ft%22)\" target=\"_blank\"\u003eshop here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSand stock up to 36-1\/2\" wide and 4\" thick with variable-speed feed control and the economy of spiral-wrapped 6\" wide sandpaper rolls.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen the G0450 is wired for 480V, it will operate on a 30A circuit!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the variable-speed conveyor, you can dial in the perfect finish for each job between 6–18 FPM.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe amp load meter indicates the combined amperage draw of both motors, allowing you to monitor them and prevent damage to them.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe depth scale indicates the thickness the workpiece will be after it has been sanded.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAlso features four 4\" dust ports to maximize dust collection, easy access to sanding drums, emergency stop for safety, solid steel construction, independent motor control, and massive power.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLike all Grizzly drum sanders, the G0450 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe G0450 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade in an ISO 9001 factory\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCSA certified\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSPECIFICATIONS:\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSanding drum motor: 15 HP, 240V\/480V* (prewired 240V), 3-phase, 43A\/21.5A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConveyor motor: 1\/3 HP\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum board dimensions: 36-1\/2\" W x 4\" T\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMinimum board dimensions: 9\" L x 1\/16\" H\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSurface speed of drums: 2800 FPM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConveyor feed rate: Variable, 6–18 FPM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSanding drums: 2, steel\/rubber-coated\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSandpaper size: 6\" x 138\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOverall Dimensions: 68\" W x 50-1\/2\" D x 49\" H\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApprox. shipping weight: 1382 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFEATURES:\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpring-loaded sanding belt tension\/sandpaper\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIndustrial-duty rubber conveyor belt\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFour 4\" dust ports\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVariable-speed conveyor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6\" steel\/rubber-coated sanding drums\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy access control panel with load meter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHinged hood with gas struts for easy drum access\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eState-of-the-art computer-balanced drums\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $325. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.\u003c\/em\u003e\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42226802032831,"sku":"G0450","price":7949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/download_20_482e2122-2d53-44e5-9d69-d32c527cb330.jpg?v=1676418041"},{"product_id":"grizzly-industrial-10-hp-industrial-dust-collector","title":"Grizzly Industrial 10 HP Industrial Dust Collector","description":"\u003ch2 data-mce-fragment=\"1\"\u003eControlling dust in a large shop can be a challenging task, but not for this machine.\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe G0673 10 HP Industrial Dust Collector features 5360 CFM air suction capacity and a 17.9\" static pressure rating for massive amounts of collection.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt can be operated as either a stationary or mobile unit. There are advantages and disadvantages to both set-ups. The advantage of the mobile system is eliminating the cost of many ducts and fittings. On the other hand, the stationary system is more versatile and convenient.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFour heavy-duty plastic collection bags (with a total of 48 cubic feet of storage capacity) will easily allow you to collect from the biggest chip and dust producing machines all day long without emptying.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe four upper 2.5 micron bag filters top off the machine and minimize the dust.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 5-port inlet is included for quick and economical dust collection.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe G0673 manual was written by our U.S. based Technical Documentation Department and is packed with useful information.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe complete and easy-to-read manual makes it easier to assemble and maintain your dust collector.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLike all Grizzly dust collectors, the G0673 comes with a one year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the dust collector may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade in an ISO 9001 factory\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSPECIFICATIONS:\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMotor: 10 HP, 220V\/440V*, 3-phase, 30A\/15A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir suction capacity: 5360 CFM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStatic pressure: 17.9\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIntake port with manifold: 4\" x 5 Holes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIntake port without manifold: 10\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSound rating: 99–101 dB\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImpeller: 17\" balanced steel, radial fin\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUpper bag size (x 4): 23-5\/8\" x 70\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLower bag size (x 4): 23-5\/8\" x 54\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCollection bag capacity: 48 cubic feet\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBag filtration: 2.5 micron\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFootprint: 80\" x 80\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOverall dimensions: 80\" W x 80\" D x 134\" H\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximate shipping weight: 472 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFEATURES:\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTEFC induction thermal overload protection motor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMagnetic switch\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFour heavy-duty legs with 3\" casters and brakes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWelded, 1\/4\" balanced steel, radial impeller\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy-duty plastic bottom bags\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $325. Please contact Grizzly Technical Support at (570) 546-9663 before placing your order.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOptional Bag Replacement:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.grizzly.com\/products\/grizzly-24-x-70-2-5-micron-polyester-filter-bag\/t21317\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.grizzly.com\/products\/grizzly-24-x-70-2-5-micron-polyester-filter-bag\/t21317\" target=\"_blank\"\u003eT21317\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUpper Bag;\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.grizzly.com\/products\/grizzly-6mil-plastic-lower-bag-for-g5954\/g6512\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.grizzly.com\/products\/grizzly-6mil-plastic-lower-bag-for-g5954\/g6512\" target=\"_blank\"\u003eG6512\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eLower Bag\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42237694869695,"sku":"G0673","price":2799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/g0673-7d676feaf6a374c7145532f0509779e1.webp?v=1683031497"},{"product_id":"grizzly-industrial-24-15-hp-3-phase-planer-wide-belt-sander","title":"Grizzly Industrial 24\" 15 HP 3-Phase Planer\/Wide-Belt Sander","description":"\u003ch2 data-mce-fragment=\"1\"\u003eThickness plane and sand in one pass!\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe G0677 24\" 15 HP 3-Phase Planer\/Wide-Belt Sander is so versatile, it can be run as a combination machine or the planer cutterhead can be raised out of the way to perform sanding operations only.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe spiral cutterhead with 188 indexable carbide inserts effortlessly planes material to size. The 25\" x 60\" sanding belt provides a surface that’s ready for the spray booth.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eVertically adjust the spiral cutterhead for unlimited control over the final finish. When it’s time to rotate or replace the carbide inserts, the cutterhead slides out on a track-and-roller system for easy access.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCombine all that with a variable-speed conveyor, and you’ve got a true production machine that takes up very little floor space!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor a full range of replacement belts for the G0677,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.grizzly.com\/search?q=SANDING+BELT\u0026amp;fq=(width:%2225+in.%22)(length:%2260+in.%22)\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.grizzly.com\/search?q=SANDING+BELT\u0026amp;fq=(width:%2225+in.%22)(length:%2260+in.%22)\" target=\"_blank\"\u003eshop here\u003c\/a\u003e. Replacement packs of ten\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.grizzly.com\/products\/grizzly-replacement-carbide-inserts-14-x-14-x-2mm-10-pack\/t20796\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.grizzly.com\/products\/grizzly-replacement-carbide-inserts-14-x-14-x-2mm-10-pack\/t20796\" target=\"_blank\"\u003ecarbide inserts\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eare available.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLike all of the Grizzly wide-belt sanders, the G0677 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe G0677 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMotor: 15 HP, 220V\/440V*, 3-phase, 36A\/18A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConveyor feed motor: 1 HP, 3.4\/1.7A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eElevation motor: 1\/4 HP, 1.2\/0.6A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum board width: 24\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum board thickness: 6\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMinimum board length: 12\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMinimum board thickness: 1\/4\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCutterhead type: Spiral with 188 inserts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInsert size and type: 14 x 14 x 2mm, indexable carbide\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCutterhead speed: 4600 RPM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSurface speed of sanding drum: 3543 FPM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSanding belt size: 25\" x 60\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConveyor speed: 14–60 FPM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir requirement: 75 PSI\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximate shipping weight: 2626 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFEATURES\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDigital control panel\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eKeypad-controlled table elevation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisc brake for emergency stops\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDust-proof photo-electric eye\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePneumatic belt tensioning and tracking\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3 rubber pressure rollers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpiral cutterhead is height adjustable\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e5\" dust port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $325. Please contact Grizzly Technical Support at (570) 546-9663 before placing your order.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42237696770239,"sku":"G0677","price":21499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/g0677-40d1826dba952306eb873bc83ab99861.webp?v=1683031505"},{"product_id":"grizzly-industrial-12-7-1-2-hp-3-phase-extreme-series®-table-saw","title":"Grizzly Industrial 12\" 7-1\/2 HP 3-Phase Extreme Series® Table Saw","description":"\u003ch2 data-mce-fragment=\"1\"\u003eA table saw with industrial-level strength, power, and capacity.\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor serious woodworkers, cabinet makers, and production shops, step it up to the G0697X Extreme Series® Table Saw.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe heavy-duty 7-1\/2 horsepower motor spins the 12\" blade at 3600 RPM while operating on 3-phase power.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith a footprint of under two square feet, you can save space in a crowded shop while still achieving an unstoppable 4\" maximum depth of cut and 36\" rip capacity.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA digital readout for the blade angle allows you to set and cut precise bevels every time with consistent results.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAn internal dust port and sloped cabinet floor directs saw dust into the 4\" dust port, providing highly effective dust removal. A poly-V serpentine belt system efficiently transfers power.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA rail mounted lockable magnetic switch with thermal overload protection provides an additional safety feature. This disables the switch to prevent accidental startup and restrict usage.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdd to that the massive precision-ground cast-iron table, worm-drive blade elevation, and a host of other features, this table saw will tackle anything you can throw at it!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLike all Grizzly table saws, the G0697X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe G0697X manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your saw.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the table saw may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade in an ISO 9001 factory\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCSA certified\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSPECIFICATIONS:\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMotor: 7-1\/2 HP, 220V\/440V* (prewired for 220V), 3-phase, 19.5A\/10A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRip capacity: 36\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum depth of cut @ 90°: 4\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum depth of cut @ 45°: 2-3\/4\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTable size: 30-3\/4\" x 48-1\/4\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFloor-to-table height: 35-3\/4\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eArbor diameter: 1\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eArbor speed: 3600 RPM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum width of dado: 3\/4\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDust port size: 4\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFootprint: 22-1\/2\" L x 24\" W\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOverall dimensions: 75\" W x 44\" D x 42-1\/2\" H\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximate shipping weight: 698 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFEATURES:\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDigital readout for bevel angle\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrecision-ground cast-iron table\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCast-iron trunnions\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3\/8\" x 3\/4\" T-slots and miter gauge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmooth and quiet poly-V serpentine belt system\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eComfortable polished chrome handles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy-duty miter gauge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes a 12\" x 60T blade and long-reach push stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $305. Please contact Grizzly Technical Support at (570) 546-9663 before placing your order.\u003c\/em\u003e\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42237767942335,"sku":"G0697X","price":3799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/g0697x-fe21254809255119f9d25742ae7c3630.jpg?v=1683031609"},{"product_id":"grizzly-industrial-10-x-50-3-hp-variable-speed-vertical-mill-with-power-feed-and-dro","title":"Grizzly Industrial 10\" x 50\" 3 HP Variable-Speed Vertical Mill with Power Feed and DRO","description":"\u003ch2\u003eAn industrial-grade machine with amazing features at a low price point.\u003c\/h2\u003e\n\u003cp\u003eThe G0797 10\" x 50\" Vertical Mill with power feed and DRO is a full-featured mill built for those that have the use of three-phase power.\u003c\/p\u003e\n\u003cp\u003eThe headstock itself can rotate 90° left\/right or tilt 45° forward\/back so it can be positioned for nearly any setup needed. The ram rotates 360° around the turret and travels 18-1\/2\" forward or backward.\u003c\/p\u003e\n\u003cp\u003eThe G0797 milling machines feature 3-axis table movement with built-in longitudinal power feed. With the 10\" x 50\" table, you can set up a rotary table or another fixture on one side without having to remove your vise on the other.\u003c\/p\u003e\n\u003cp\u003eSelect spindle speeds between the 60–500 RPM low range and the 500–4200 RPM high range. Dial in your speed with the variable-speed handwheel and view it on the high-low range speed indicators.\u003c\/p\u003e\n\u003cp\u003eThe bed of the lathe is constructed with Meehanite® castings that are hardened and precision-ground in the traditional three V-way prismatic design.\u003c\/p\u003e\n\u003cp\u003eLike all Grizzly vertical milling machines, the G0797 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\n\u003cp\u003eThe G0797 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your mill.\u003c\/p\u003e\n\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the mill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003cp\u003eMade in an ISO 9001 factory\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRequired power supply: 220V\/440V, 3-phase, min. 15A circuit\u003c\/li\u003e\n\u003cli\u003eMotor: 3HP, 220V\/440V* (prewired for 220V), three-phase, 6.4A\/3.2A\u003c\/li\u003e\n\u003cli\u003eSpindle taper: R-8\u003c\/li\u003e\n\u003cli\u003eSpindle speed: Variable, 60–4200 RPM\u003c\/li\u003e\n\u003cli\u003eSpindle travel: 5\"\u003c\/li\u003e\n\u003cli\u003eMaximum distance spindle to table: 19-1\/4\"\u003c\/li\u003e\n\u003cli\u003eTable travel (longitudinal): 30\"\u003c\/li\u003e\n\u003cli\u003eTable travel (across): 14\"\u003c\/li\u003e\n\u003cli\u003eTable travel (vertical): 15\"\u003c\/li\u003e\n\u003cli\u003eTable size: 10\" x 50\"\u003c\/li\u003e\n\u003cli\u003eT-slots: 3 @ 2-1\/2\" centers, 5\/8\" wide\u003c\/li\u003e\n\u003cli\u003eHead ram travel: 18-1\/2\" F\/B\u003c\/li\u003e\n\u003cli\u003eHead tilt: 90° L\/R, 45° F\/B\u003c\/li\u003e\n\u003cli\u003eTurret\/column swivel: 360°\u003c\/li\u003e\n\u003cli\u003eDrilling capacity for steel: 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eEnd milling capacity: 1\"\u003c\/li\u003e\n\u003cli\u003eFace milling capacity: 3\"\u003c\/li\u003e\n\u003cli\u003eFootprint: 48\" x 33\"\u003c\/li\u003e\n\u003cli\u003eOverall shipping dimensions: 100\" W x 85\" D x 88\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 3021 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2-Axis DRO\u003c\/li\u003e\n\u003cli\u003eMeehanite® castings\u003c\/li\u003e\n\u003cli\u003eOne-shot pump lubrication for table ways\u003c\/li\u003e\n\u003cli\u003eAuto spindle stop with micro-adjustable stop\u003c\/li\u003e\n\u003cli\u003eChrome-plated, precision-ground quill\u003c\/li\u003e\n\u003cli\u003eX- and Y-axis way covers\u003c\/li\u003e\n\u003cli\u003eForward and reverse spindle rotation\u003c\/li\u003e\n\u003cli\u003eIncludes service tools and toolbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42297637011647,"sku":"G0797","price":14199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/download_9_bccf92fd-96f0-4257-a7a7-40f348c42a77.jpg?v=1679695507"},{"product_id":"grizzly-industrial-12-7-1-2-hp-3-phase-compact-sliding-table-saw","title":"Grizzly Industrial 12\" 7-1\/2 HP 3-Phase Compact Sliding Table Saw","description":"\u003ch2\u003eA compact and high horsepower sliding table saw.\u003c\/h2\u003e\n\u003cp\u003eA sliding table saw can also take up a lot of room. What to do if you're pressed for shop space?\u003c\/p\u003e\n\u003cp\u003eThe space-saving G0820 12\" 7-1\/2 HP 3-Phase Compact Sliding Table Saw, measures 118\" x 90\"!\u003c\/p\u003e\n\u003cp\u003eThis slider will allow you to crosscut sheets up to 63\" x 101-1\/2\" and rip panels as wide as 33\".\u003c\/p\u003e\n\u003cp\u003eDon't let the smaller size fool you; this 7-1\/2 HP workhorse has all of the user-friendly features you'd expect from an industrial-duty sliding table saw.\u003c\/p\u003e\n\u003cp\u003eThese features include a scoring blade that eliminates tear-out, a miter fence with adjustable flip-stops, dust ports above and below the blade, riving knife, a standard rip fence and a clamping hold-down system for the sliding table.\u003c\/p\u003e\n\u003ch3\u003eFor production ripping and crosscutting, every shop needs a sliding table saw—and the G0820 just might be the perfect fit!\u003c\/h3\u003e\n\u003cp\u003eLike all Grizzly table saws, the G0820 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\n\u003cp\u003eThe G0820 manual was written by our U.S. based Technical Documentation Department and is packed with useful information; making it easier to assemble and maintain your saw.\u003c\/p\u003e\n\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the table saw are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003cp\u003eMade in an ISO 9001 factory\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor: 7-1\/2 HP, 220V\/440V* (prewired for 220V), 3-phase, 20A\/10A\u003c\/li\u003e\n\u003cli\u003eRip capacity: 33\"\u003c\/li\u003e\n\u003cli\u003eCrosscut capacity: 63\"\u003c\/li\u003e\n\u003cli\u003eBlade tilt: 0–45°\u003c\/li\u003e\n\u003cli\u003eMax. depth of cut @ 90°: 3-5\/16\"\u003c\/li\u003e\n\u003cli\u003eMax. depth of cut @ 45°: 2-3\/8\"\u003c\/li\u003e\n\u003cli\u003eMain table size with extensions: 40\" x 68\"\u003c\/li\u003e\n\u003cli\u003eSliding table size: 63\" x 12-1\/4\"\u003c\/li\u003e\n\u003cli\u003eFloor-to-table height: 34-1\/4\"\u003c\/li\u003e\n\u003cli\u003eMain blade size: 12\"\u003c\/li\u003e\n\u003cli\u003eMain blade arbor: 1\"\u003c\/li\u003e\n\u003cli\u003eMain blade speed: 4000 RPM\u003c\/li\u003e\n\u003cli\u003eScoring blade size: 4-3\/4\" (120mm)\u003c\/li\u003e\n\u003cli\u003eScoring blade arbor: 20mm\u003c\/li\u003e\n\u003cli\u003eScoring blade speed: 8000 RPM\u003c\/li\u003e\n\u003cli\u003eNumber of dust ports: 2\u003c\/li\u003e\n\u003cli\u003eDust port size: 2-1\/2\" (compatible with standard shop vacuums), 5\"\u003c\/li\u003e\n\u003cli\u003eFootprint: 35\" W x 45\" L\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 118\" W x 90\" D x 45\" H\u003c\/li\u003e\n\u003cli\u003eApprox. shipping weight: 996 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCrosscut fence for 90° and 45° cuts\u003c\/li\u003e\n\u003cli\u003eAluminum rip fence\u003c\/li\u003e\n\u003cli\u003eDouble roller-carriage sliding table\u003c\/li\u003e\n\u003cli\u003eAdjustable riving knife\u003c\/li\u003e\n\u003cli\u003eAdjustable blade hood guard\u003c\/li\u003e\n\u003cli\u003e5\" Main dust port\u003c\/li\u003e\n\u003cli\u003eBlade tilts 45° for miter cutting\u003c\/li\u003e\n\u003cli\u003ePrecision-ground cast-iron main table\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $325. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.\u003c\/em\u003e\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42297672761535,"sku":"G0820","price":7549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/download_4_cdcdb8fe-7f61-4092-a3f8-d9779f373e9e.jpg?v=1679701252"},{"product_id":"grizzly-industrial-14-10-hp-3-phase-sliding-table-saw-with-dro-and-cnc-fence","title":"Grizzly Industrial 14\" 10 HP 3-Phase Sliding Table Saw with DRO and CNC Fence","description":"\u003ch2\u003eAn easy-to-use, high-capacity sliding table saw.\u003c\/h2\u003e\n\u003cp\u003eThis saw was designed top-to-bottom for high-output production shops starting with its powerful 10 HP motor.\u003c\/p\u003e\n\u003cp\u003eThe digital blade controls and programmable CNC rip fence maximize time savings and provide consistency.\u003c\/p\u003e\n\u003cp\u003eSafety and ease of operation are also factored in with dual operation stations—one on the right side of the table for when using the rip fence, and one on the left for when using the slider.\u003c\/p\u003e\n\u003cp\u003eThe sliding table has a full 134\" of crosscutting space and the rip fence allows a 51\" rip—wider than a sheet of plywood!\u003c\/p\u003e\n\u003cp\u003eThe overhead blade guard is enclosed and fully adjustable to maintain maximum protection around the saw blade with a 4\" dust port.\u003c\/p\u003e\n\u003cp\u003eFor busy shops who can't afford downtime, this machine will boost your production and pay for itself in no time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRecommended for use with the G7979 20 HP Rotary Phase Converter.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe G0853 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects.\u003c\/p\u003e\n\u003cp\u003eThe G0853 manual was written by our U.S. based Technical Documentation Department.\u003c\/p\u003e\n\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003cp\u003eMade in an ISO 9001 factory\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMain motor: 10 HP, 220V\/440V* (prewired for 220V), 3-phase, 26A\/13A\u003c\/li\u003e\n\u003cli\u003eScoring motor: 1 HP\u003c\/li\u003e\n\u003cli\u003eRip capacity: 51\"\u003c\/li\u003e\n\u003cli\u003eMax. crosscut: 134\" W x 121\" L\u003c\/li\u003e\n\u003cli\u003eBlade tilt: 0-45°\u003c\/li\u003e\n\u003cli\u003eMax. depth of cut at 9°: 4\"\u003c\/li\u003e\n\u003cli\u003eMax. depth of cut at 45°: 2-3\/4\"\u003c\/li\u003e\n\u003cli\u003eMain table size with extensions: 59\" x 68\"\u003c\/li\u003e\n\u003cli\u003eSliding table size: 15-5\/8\" x 126\"\u003c\/li\u003e\n\u003cli\u003eMain blade size: 14\"\/12\"\u003c\/li\u003e\n\u003cli\u003eMain blade arbor: 1\"\u003c\/li\u003e\n\u003cli\u003eMain blade speed: 3000, 4000, 5000 RPM\u003c\/li\u003e\n\u003cli\u003eScoring blade size: 4-3\/4\"\u003c\/li\u003e\n\u003cli\u003eScoring blade speed: 8000 RPM\u003c\/li\u003e\n\u003cli\u003eDust port sizes: 4\", 5\"\u003c\/li\u003e\n\u003cli\u003eFloor space required: 271\" W x 205\" D\u003c\/li\u003e\n\u003cli\u003eOverall size: 133\" W x 147\" D x 66\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 2176 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDigital controls for main blade tilt and rip fence adjustment\u003c\/li\u003e\n\u003cli\u003eProgrammable CNC rip fence\u003c\/li\u003e\n\u003cli\u003eAccepts 12\" and 14\" blades\u003c\/li\u003e\n\u003cli\u003eCross-slide table with eccentric locking clamp and hard chrome-plated slideway\u003c\/li\u003e\n\u003cli\u003eEasily adjustable blade guard with built-in dust hood\u003c\/li\u003e\n\u003cli\u003eMiter fence adjustable 30° left and 45° right\u003c\/li\u003e\n\u003cli\u003eScoring blade virtually eliminates tear-out\u003c\/li\u003e\n\u003cli\u003eSliding table on vertical guide system with precision bearing rollers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $325. Please contact Grizzly Technical Support at (570) 546-9663 before placing your order.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42300376318143,"sku":"G0853","price":16999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/products\/download_9_34d1c10e-c521-4ae3-af03-2e7fb70e550c.jpg?v=1679957853"},{"product_id":"jet-tools-taper-attachment-for-elite-evs-1340-and-evs-1440-lathes","title":"Jet Tools - Taper Attachment for ELITE EVS-1340 and EVS-1440 Lathes","description":"\u003csection data-view=\"Product.Information\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"product-details-information-content\" id=\"item-details-goto\" data-mce-fragment=\"1\"\u003e\n\u003ch2 class=\"product-details-information-tab-content-panel-title\" data-mce-fragment=\"1\"\u003eDetails\u003c\/h2\u003e\n\u003cdiv class=\"product-details-information-content-container\" data-mce-fragment=\"1\"\u003e\n\u003cdiv role=\"tabpanel\" data-mce-fragment=\"1\"\u003e\n\u003cul class=\"product-details-information-content-tabs\" role=\"tablist\" data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"product-details-information-tab-content show row\" data-type=\"information-content\" data-action=\"tab-content\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-md-6 product-details-left-col\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"product-details-description\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 892035 Description\u003c\/h4\u003e\n\u003cp class=\"product-details-short-description-text\" data-mce-fragment=\"1\"\u003eElite Machinery comes standard with increased precision needed to hit stricter tolerance guidelines demanded in today’s custom manufacturing settings; durability built into every work surface to do demanding jobs time and time again, and a robust commitment to safety that starts with CSA \/ CUS Certification. These defining factors continue throughout Elite machinery accessories to expand your machines capabilities.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details-includes\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 892035 Includes\u003c\/h4\u003e\n\u003cul class=\"product-details-includes-list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(1) Taper Attachment for ELITE E-1340 and E-1440 Lathes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details-features\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 892035 Features\u003c\/h4\u003e\n\u003cul class=\"product-details-features-list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpecifically designed for Elite E-1340VS and E-1440VS Lathes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10° inclusive cutting capacity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounts to predrilled and tapped holes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFactory installation available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details-specs\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 892035 Specifications\u003c\/h4\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eSAP Gross Weight\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eSAP Net Weight\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Jet Tools","offers":[{"title":"Default Title","offer_id":42392947523775,"sku":"JT9-892035","price":2449.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Jet-SKU892035_01.jpg?v=1690951320"},{"product_id":"jet-tools-5c-lever-type-collet-closer-for-elite-evs-1340-and-evs-1440-lathes","title":"Jet Tools - 5C Lever Type Collet Closer For ELITE EVS-1340 and EVS-1440 Lathes","description":"\u003ch2 class=\"product-details-information-tab-content-panel-title\" data-mce-fragment=\"1\"\u003eDetails\u003c\/h2\u003e\n\u003cdiv class=\"product-details-information-content-container\" data-mce-fragment=\"1\"\u003e\n\u003cdiv role=\"tabpanel\" data-mce-fragment=\"1\"\u003e\n\u003cul class=\"product-details-information-content-tabs\" role=\"tablist\" data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"product-details-information-tab-content show row\" data-type=\"information-content\" data-action=\"tab-content\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-md-6 product-details-left-col\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"product-details-description\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 892036 Description\u003c\/h4\u003e\n\u003cp class=\"product-details-short-description-text\" data-mce-fragment=\"1\"\u003eElite Machinery comes standard with increased precision needed to hit stricter tolerance guidelines demanded in today’s custom manufacturing settings; durability built into every work surface to do demanding jobs time and time again, and a robust commitment to safety that starts with CSA \/ CUS Certification. These defining factors continue throughout Elite machinery accessories to expand your machines capabilities.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details-includes\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 892036 Includes\u003c\/h4\u003e\n\u003cul class=\"product-details-includes-list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(1) 5C Lever Type Collet Closer For ELITE E-1340 E-1440 Lathes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details-features\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 892036 Features\u003c\/h4\u003e\n\u003cul class=\"product-details-features-list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpecifically designed for Elite E-1340VS and E-1440VS Lathes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrecision ground components\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRear mounted lever action\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUses 5C collets\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSome drilling and other modifications may be required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details-specs\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 892036 Specifications\u003c\/h4\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eSAP Gross Weight\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eSAP Net Weight\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Jet Tools","offers":[{"title":"Default Title","offer_id":42398818664639,"sku":"JT9-892036","price":2835.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Jet-SKU892036_01.jpg?v=1690951627"},{"product_id":"jet-tools-collet-closer-for-1440-series-lathes","title":"Jet Tools - Collet Closer for 1440 Series Lathes","description":"\u003ch2 class=\"product-details-information-tab-content-panel-title\" data-mce-fragment=\"1\"\u003eDetails\u003c\/h2\u003e\n\u003cdiv class=\"product-details-information-content-container\" data-mce-fragment=\"1\"\u003e\n\u003cdiv role=\"tabpanel\" data-mce-fragment=\"1\"\u003e\n\u003cul class=\"product-details-information-content-tabs\" role=\"tablist\" data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"product-details-information-tab-content show row\" data-type=\"information-content\" data-action=\"tab-content\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-md-6 product-details-left-col\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"product-details-includes\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 321519 Includes\u003c\/h4\u003e\n\u003cul class=\"product-details-includes-list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(1) Collet Closer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details-features\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 321519 Features\u003c\/h4\u003e\n\u003cul class=\"product-details-features-list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpecially designed for each model\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrecision ground components\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUses 5C collets\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRear mounted lever action\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details-specs\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 321519 Specifications\u003c\/h4\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eHeight (in)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eLength (in)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eGross Weight (lbs)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eNet Weight (lbs)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eWidth\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Jet Tools","offers":[{"title":"Default Title","offer_id":42399503417535,"sku":"JT9-321519","price":3599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Jet-321519_01.jpg?v=1690952329"},{"product_id":"jet-tools-taper-attachment-for-w-series-gh-1440-lathes","title":"Jet Tools - Taper Attachment for W Series \u0026 GH-1440 Lathes","description":"\u003ch2 class=\"product-details-information-tab-content-panel-title\" data-mce-fragment=\"1\"\u003eDetails\u003c\/h2\u003e\n\u003cdiv class=\"product-details-information-content-container\" data-mce-fragment=\"1\"\u003e\n\u003cdiv role=\"tabpanel\" data-mce-fragment=\"1\"\u003e\n\u003cul class=\"product-details-information-content-tabs\" role=\"tablist\" data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"product-details-information-tab-content show row\" data-type=\"information-content\" data-action=\"tab-content\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-md-6 product-details-left-col\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"product-details-includes\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 321520 Includes\u003c\/h4\u003e\n\u003cul class=\"product-details-includes-list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(1) Taper Attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details-features\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 321520 Features\u003c\/h4\u003e\n\u003cul class=\"product-details-features-list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpecially designed for each model\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10° inclusive cutting capacity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounts to predrilled and tapped holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details-specs\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"product-details-section-title\" data-mce-fragment=\"1\"\u003eJet 321520 Specifications\u003c\/h4\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eGross Weight (lbs)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e38.82\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003eNet Weight (lbs)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e38.82\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Jet Tools","offers":[{"title":"Default Title","offer_id":42401018609855,"sku":"JT9-321520","price":4169.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/Jet-321520_01.jpg?v=1690952803"},{"product_id":"grizzly-g0487-51-30-hp-3-phase-double-wide-belt-sander","title":"Grizzly G0487 - 51\" 30 HP 3-Phase Double Wide-Belt Sander","description":"\u003ch1\u003eG0487 51\" 30 HP 3-Phase Double Wide-Belt Sander\u003c\/h1\u003e\n\u003ch2\u003eCut your sanding time in half and sand to finer grits in a single pass!\u003c\/h2\u003e\n\u003cp\u003eThe first belt of the G0487 51\" Double Wide-Belt Sander runs on a single drum and the rear belt runs on a platen system which allows you to adjust the sanding depth.\u003c\/p\u003e\n\u003cp\u003eIf you are still sanding through two belt changes using a single head wide-belt sander, cut your time in half with this double-head sander!\u003c\/p\u003e\n\u003cp\u003eThe sanding belts are 51\" wide by 138\" long. For a full range replacement belts for the G0487, \u003ca href=\"https:\/\/www.grizzly.com\/search?q=SANDING+BELT\u0026amp;fq=(width:%2251+in.%22)(length:%2275+in.%22)\" target=\"_blank\"\u003eshop here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAn efficient and clean dust collection system is essential to the proper function of the sander. Ensuring a healthy work environment is also dependent upon cleaning and maintaining your dust collection system.\u003c\/p\u003e\n\u003cp\u003eThe G0487 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander.\u003c\/p\u003e\n\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003cp style=\"color:red;\"\u003eMade in an ISO 9001 factory\u003c\/p\u003e\n\u003cp style=\"color:red;\"\u003eCSA certified\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSanding motor HP: 30 HP, 220V\/440V*, 3-phase, 72A\/36A \u003c\/li\u003e\n\u003cli\u003eConveyor motor HP: 2 HP, 6A\/3A\u003c\/li\u003e\n\u003cli\u003eTable lift motor HP: 1\/4 HP, 1.2A\/0.6A\u003c\/li\u003e\n\u003cli\u003eMaximum board width: 51\"\u003c\/li\u003e\n\u003cli\u003eMaximum board thickness: 6\"\u003c\/li\u003e\n\u003cli\u003eMinimum board length: 11\"\u003c\/li\u003e\n\u003cli\u003eMinimum board thickness: 3\/16\"\u003c\/li\u003e\n\u003cli\u003eFront drum surface speed: 3500 FPM\u003c\/li\u003e\n\u003cli\u003eRear drum surface speed: 2600 FPM\u003c\/li\u003e\n\u003cli\u003eConveyor speed: 14–60 FPM\u003c\/li\u003e\n\u003cli\u003eSanding belt size: 51\" x 75\"\u003c\/li\u003e\n\u003cli\u003eAir requirement: 57–75 PSI, 12.3 CFM\u003c\/li\u003e\n\u003cli\u003eDust ports: 10 x 5\"\u003c\/li\u003e\n\u003cli\u003eFootprint: 68\" x 31\"\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 71\" W x 59-1\/2\" D x 79\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 3880 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRubber pressure rollers\u003c\/li\u003e\n\u003cli\u003eHard rubber infeed drum\u003c\/li\u003e\n\u003cli\u003eAdjustable graphite platen\u003c\/li\u003e\n\u003cli\u003eDigital encoder depth control\u003c\/li\u003e\n\u003cli\u003eAmp\/load meter\u003c\/li\u003e\n\u003cli\u003eDisc brake for emergency stop\u003c\/li\u003e\n\u003cli\u003eVariable-feed speed\u003c\/li\u003e\n\u003cli\u003e1-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V.  We can rewire to 440V in a few days’ time for a fee of $385.  Please contact Grizzly Technical Support at (570)546-9663 before placing your order. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42699327766719,"sku":"G0487","price":41199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/g0487-3f0ca9bc951dab3d354db9555d225b8c.webp?v=1703868821"},{"product_id":"grizzly-g0503-12-20-hp-horizontal-resaw-bandsaw","title":"Grizzly G0503 - 12\" 20 HP Horizontal Resaw Bandsaw","description":"\u003ch1\u003eG0503 12\" 20 HP Horizontal Resaw Bandsaw\u003c\/h1\u003e\n\u003ch2\u003eAn industrial resaw for increased production.\u003c\/h2\u003e\n\u003cp\u003eWith a massive 20 HP motor, 28\" diameter wheels and 168\" blade, the G0503 12\" 20 HP Horizontal Resaw Bandsaw can resaw all day long from the hardest species of wood without taking a rest.\u003c\/p\u003e\n\u003cp\u003eBecause the horizontal design, you can count on accurate and consistent results every time.\u003c\/p\u003e\n\u003cp\u003eThis bandsaw was designed with careful detail for maximizing production to maximize safety and production - so YOU can keep your profits riding high.\u003c\/p\u003e\n\u003cp\u003eLike all Grizzly bandsaws, the G0503 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. \n\u003c\/p\u003e\u003cp\u003eThe G0503 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your bandsaw.\n\u003c\/p\u003e\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the bandsaw may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMain motor: 20 HP, 220V\/440V* (prewired 220V), 3-Phase, 48A\/21A \u003c\/li\u003e\n\u003cli\u003eHydraulic tank motor: 2 HP, 6A\/3A\u003c\/li\u003e\n\u003cli\u003eHydraulic pressure: 775 PSI\u003c\/li\u003e\n\u003cli\u003eMaximum cutting capacity: 12\" x 12\"\u003c\/li\u003e\n\u003cli\u003eDistance from blade-to-conveyor table: 1\/4\" - 5\"\u003c\/li\u003e\n\u003cli\u003eSaw wheel size: 28\" x 7\/8\"\u003c\/li\u003e\n\u003cli\u003eSaw blade size: 168\" x 1\"\u003c\/li\u003e\n\u003cli\u003eSaw blade speed: 7300 FPM\u003c\/li\u003e\n\u003cli\u003eConveyor belt size: 11-1\/4\" x 215-3\/4\" long\u003c\/li\u003e\n\u003cli\u003eVariable feed speed: 32 - 82 FPM\u003c\/li\u003e\n\u003cli\u003eConveyor table: 12\" wide x 102\" long\u003c\/li\u003e\n\u003cli\u003eFloor to table height: 35-1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall size: 108\" W x 81\" D x 65-1\/2\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 2778 lb. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTwo 4\" dust ports\u003c\/li\u003e\n\u003cli\u003eReturn rollers\u003c\/li\u003e\n\u003cli\u003eAdjustable HSS blade guides\u003c\/li\u003e\n\u003cli\u003eManual cutting height adjustment\u003c\/li\u003e\n\u003cli\u003eVariable feed speed by hydraulic drive\u003c\/li\u003e\n\u003cli\u003eManual blade tension adjustment\u003c\/li\u003e\n\u003cli\u003eMovable control panel\u003c\/li\u003e\n\u003cli\u003eCarbon-steel guides\u003c\/li\u003e\n\u003cli\u003eSteel frame construction\u003c\/li\u003e\n\u003cli\u003eSteel conveyor table\u003c\/li\u003e\n\u003cli\u003eRubber conveyor belt\u003c\/li\u003e\n\u003cli\u003e8\" cast-iron pressure rollers with polyurethane tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $385. Please contact Grizzly Technical Support at (570) 546-9663 before placing your order. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/b\u003e\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42699330420927,"sku":"G0503","price":15099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/g0503-5320a6de08ea9327c084d8f8fa22241b.webp?v=1703869238"},{"product_id":"grizzly-g0919-twin-head-dual-blade-resaw-bandsaw","title":"Grizzly G0919 - Twin Head\/Dual-Blade Resaw Bandsaw","description":"\u003ch1\u003eG0919 Twin Head\/Dual Blade Resaw Bandsaw\u003c\/h1\u003e\n\u003ch2\u003eFor any resaw operation or large-scale production facility.\u003c\/h2\u003e\n\u003cp\u003eThe G0919 Twin-Head Horizontal Resaw Bandsaw makes quick work of rough-sawn material with two massive 20 HP main motors.\u003c\/p\u003e\n\u003cp\u003eThe dual 168\" x 2\" blades slice through material up to 10\" thick x 11-3\/4\" wide as the conveyor feeds it through at speeds from 10 - 90 FPM.\u003c\/p\u003e\n\u003cp\u003eWhether you're resawing planking or making custom beams, dial in the blade heights and feed rate on the digital control panel.\u003c\/p\u003e\n\u003cp\u003eEach saw blade has independent elevation controls and digital readouts for precise blade height adjustment.\u003c\/p\u003e\n\u003cp\u003eWith the push of a button, cuts from 1\/4\" to 5\" thick with the lower blade and from 1\/2\" to 6-3\/4\" thick with the upper blade.\u003c\/p\u003e\n\u003cp\u003eAutomatic hydraulic blade tensioners allow for quick de-tensioning and replacing the blades with the flick of a switch.\u003c\/p\u003e\n\u003cp\u003eA pneumatic infeed switch automatically adjusts the hold-down roller to apply consistent downward pressure during the cut.\u003c\/p\u003e\n\u003cp\u003eThe G0919 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\n\u003cp\u003eThe G0919 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete-and-easy to read manual makes it easier to assemble and maintain your bandsaw.\u003c\/p\u003e\n\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMain blade motors (x2): 20 HP, 220V\/440V* (prewired 220V), 3-phase, 51A\/26A\u003c\/li\u003e\n\u003cli\u003eBlade elevation motors (x2): 1\/4 HP, 1A\/0.5A\u003c\/li\u003e\n\u003cli\u003eMax. workpiece width: 11-3\/4\"\u003c\/li\u003e\n\u003cli\u003eMax. workpiece thickness: 10\"\n\u003c\/li\u003e\n\u003cli\u003eMinimum cut height: 1\/4\"\n\u003c\/li\u003e\n\u003cli\u003eBlade size: 168\" x 2\"\u003c\/li\u003e\n\u003cli\u003eBlade speed: 6700 FPM\u003c\/li\u003e\n\u003cli\u003eFloor-to-table height: 35-3\/4\"\u003c\/li\u003e\n\u003cli\u003eConveyor feed rate: 10 - 90 FPM\u003c\/li\u003e\n\u003cli\u003eConveyor table size: 107-1\/4\" L x 11-13\/16\" W\u003c\/li\u003e\n\u003cli\u003eNumber of dust ports: 3\u003c\/li\u003e\n\u003cli\u003eDust port size: 4\"\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 89-1\/2\" W x 108\" D x 73\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 3661 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIndependent digital blade height controls and DROs\u003c\/li\u003e\n\u003cli\u003eHydraulically driven feed conveyors\u003c\/li\u003e\n\u003cli\u003ePowered saw elevation\u003c\/li\u003e\n\u003cli\u003eHydraulic blade tensioning with gauge\u003c\/li\u003e\n\u003cli\u003eAdjustable HSS blade guides\u003c\/li\u003e\n\u003cli\u003eSimple and quick blade changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $819. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42699344183487,"sku":"G0919","price":27999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/g0919-75f82c12c7e9f140ab855ffc24e42e07.webp?v=1759811240"},{"product_id":"grizzly-g0623x3-10-7-1-2-hp-3-phase-extreme-series-sliding-table-saw","title":"Grizzly G0623X3 - 10\" 7-1\/2 HP 3-Phase Extreme-Series Sliding Table Saw","description":"\u003ch1\u003eG0623X3 10\" 7-1\/2 HP 3-Phase Extreme-Series Sliding Table Saw\u003c\/h1\u003e\n\u003ch2\u003eA sliding table saw for those with limited shop space.\u003c\/h2\u003e\n\u003cp\u003eThe G0623X3 10\" Sliding Table Saw perfectly blends traditional table saw functionality with easy-to-use sliding table ripping and saw cross-cutting capability.\n\u003c\/p\u003e\u003cp\u003eThe G0623X allows full-sheet cutting capacity for crosscuts and miters, plus the added benefit of 33\" of ripping capacity.\u003c\/p\u003e\n\u003cp\u003eThe 7-1\/2 horsepower motor spins the 10\" main blade at 4000 RPM and offers a 3-1\/8” depth of cut.\n\u003c\/p\u003e\u003cp\u003eThe 3-1\/8\" scoring blade creates a crisp leading cut to prevent tearout in paneling surface material by spinning at 8000 RPM.\u003c\/p\u003e\n\u003cp\u003eThe dust shroud has a 2-1\/2\" dust port that connects directly to the riving knife mount to keep the cutting area clean. It is compatible with standard shop vacuums.\u003c\/p\u003e\n\u003cp\u003eThe compact, heavy-duty aluminum 12-1\/4\" x 63\" sliding table travels on ball-bearing guides for effortless cutting action.\u003c\/p\u003e\n\u003cp\u003eThe single lever-locking, 2\" tall crosscut fence evenly supports your workpiece and allows for cross cutting pieces up to 63\" wide.\u003c\/p\u003e\n\u003cp\u003eFor miter cuts, simply rotate the fence assembly and lock it in place for miters up to 48\" wide when set at 45°.\u003c\/p\u003e\n\u003cp\u003eLike all Grizzly table saws, the G0623X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\n\u003cp\u003eThe G0623X3 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information; making it easier to assemble and maintain your saw.\u003c\/p\u003e\n\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S.-based.\u003c\/p\u003e\n\u003cp\u003eParts for the table saw may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003cp style=\"color:red;\"\u003eCSA certified\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMotor: 7-1\/2 HP, 220V\/440V (prewired for 220V), 3-phase,18A\/9A\u003c\/li\u003e\n\u003cli\u003eRip capacity: 33\"\u003c\/li\u003e\n\u003cli\u003eCrosscut capacity: 63\"\u003c\/li\u003e\n\u003cli\u003eMax. depth of cut @ 90°: 3-1\/8\"\u003c\/li\u003e\n\u003cli\u003eMax. depth of cut @ 45°: 2-1\/4\"\u003c\/li\u003e\n\u003cli\u003eBlade tilt: 0 - 45°\u003c\/li\u003e\n\u003cli\u003eMain blade size: 10\"\u003c\/li\u003e\n\u003cli\u003eMain blade arbor: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eMain blade speed: 4000 RPM\n\u003c\/li\u003e\n\u003cli\u003eScoring blade size: 3-1\/8\"\n\u003c\/li\u003e\n\u003cli\u003eScoring blade arbor: 22mm\n\u003c\/li\u003e\n\u003cli\u003eScoring blade speed: 8000 RPM\n\u003c\/li\u003e\n\u003cli\u003eMax. width of dado: 13\/16\"\n\u003c\/li\u003e\n\u003cli\u003eMain table size: 40\" x 47\"\n\u003c\/li\u003e\n\u003cli\u003eSliding table size: 12-1\/4\" x 63\"\n\u003c\/li\u003e\n\u003cli\u003eFloor-to-table height: 33-5\/8\"\n\u003c\/li\u003e\n\u003cli\u003eDust port sizes: 4\" and 2-1\/2\"\n\u003c\/li\u003e\n\u003cli\u003eFootprint: 25-1\/2\" L x 28\" W\n\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 76\" W x 125\" D x 46\" H\n\u003c\/li\u003e\n\u003cli\u003eApprox. shipping weight: 670 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBlade guard with 2-1\/2\" dust port\u003c\/li\u003e\n\u003cli\u003e4\" main dust port\n\u003c\/li\u003e\n\u003cli\u003eAdjustable scoring knife kerf\n\u003c\/li\u003e\n\u003cli\u003eAdjustable riving knife\n\u003c\/li\u003e\n\u003cli\u003eSingle-lever locking fence\n\u003c\/li\u003e\n\u003cli\u003eDadoes up to 13\/16\" wide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $385. Please contact Grizzly Technical Support at (570) 546-9663 before placing your order. \u003c\/em\u003e\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42699355816127,"sku":"G0623X3","price":5499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/g0623x3-53530d132ceffb83e8b11a4fc0c3a98c.webp?v=1759811267"},{"product_id":"grizzly-g0652-10-5-hp-3-phase-heavy-duty-cabinet-table-saw","title":"Grizzly G0652 - 10\" 5 HP 3-Phase Heavy-Duty Cabinet Table Saw","description":"\u003ch1\u003eG0652 10\" 5 HP 3-Phase Heavy-Duty Cabinet Table Saw\u003c\/h1\u003e\n\u003ch2\u003eOutfeed tables make cutting long panels and wide stock much easier.\u003c\/h2\u003e\n\u003cp\u003eThe G0652 10\" 5 HP 3-Phase Heavy-Duty Cabinet Table Saw makes large-scale production ripping operations possible by combining the 52\" rip capacity with the precision-ground cast-iron extended side and rear tables that support a full sheet of plywood.\n\u003c\/p\u003e\u003cp\u003eA 3-phase power supply delivers power at a steady, constant rate. 3-Phase power is a three-wire AC power circuit that most residential shops don’t have access to. It is mostly found in industrial settings. \n\u003c\/p\u003e\u003cp\u003eThe underside of the 10\" blade is encapsulated with a dust hood for improved dust collection and reduced need for cleaning inside the cabinet.\n\u003c\/p\u003e\u003cp\u003eThe aluminum fence faces and scale indicators read on both sides of the fence, allowing easy fence use on either side of the blade.\n\u003c\/p\u003e\u003cp\u003eA digital readout for the blade angle allows you to set and cut precise bevels every time with consistent results.\n\u003c\/p\u003e\u003cp\u003eLike all Grizzly table saws, the G0652 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. \n\u003c\/p\u003e\u003cp\u003eThe G0652 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your saw.\n\u003c\/p\u003e\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the table saw may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\n\u003c\/p\u003e\u003cp style=\"color:red;\"\u003eMade in an ISO 9001 factory\u003c\/p\u003e\n\u003cp style=\"color:red;\"\u003eCSA certified\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMotor: 5 HP, 220V\/440V* (prewired for 220V), 3-phase, 12A\/6A\n\u003c\/li\u003e\n\u003cli\u003eRip capacity: 52\" right, 18\" left of blade\n\u003c\/li\u003e\n\u003cli\u003eMax. depth of cut @ 90°: 3-3\/16\"\n\u003c\/li\u003e\n\u003cli\u003eMax. depth of cut @ 45°: 2-3\/16\"\n\u003c\/li\u003e\n\u003cli\u003eOverall table dimensions: 75-3\/4\" W x 65-3\/4\" D\n\u003c\/li\u003e\n\u003cli\u003eDistance from front of table to center of blade: 14-7\/8\"\n\u003c\/li\u003e\n\u003cli\u003eFloor-to-table height: 34-7\/8\"\n\u003c\/li\u003e\n\u003cli\u003eArbor diameter: 5\/8\"\n\u003c\/li\u003e\n\u003cli\u003eArbor speed: 4000 RPM\n\u003c\/li\u003e\n\u003cli\u003eMax. width of dado: 3\/4\"\n\u003c\/li\u003e\n\u003cli\u003eDust port size: 4\"\n\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 91-1\/2\" W x 75\" D x 40-5\/8\" H\n\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 774 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDigital readout for bevel angle\n\u003c\/li\u003e\n\u003cli\u003eRight and rear extension tables\n\u003c\/li\u003e\n\u003cli\u003ePrecision-ground cast-iron table\n\u003c\/li\u003e\n\u003cli\u003eCast-iron trunnions\n\u003c\/li\u003e\n\u003cli\u003e3\/8\" x 3\/4\" T-slots \u0026amp; heavy-duty miter gauge\n\u003c\/li\u003e\n\u003cli\u003ePoly-V serpentine drive belt\n\u003c\/li\u003e\n\u003cli\u003e\u003cfont color=\"blue\"\u003eIncludes 10\" x 40T blade \u0026amp; push stick\u003c\/font\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $305. Please contact Grizzly Technical Support at (570) 546-9663 before placing your order.\n\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003e**This machine requires a 3-phase power supply. Most households usually only have single-phase power. Unless you are certain that you have 3-phase power, buy a machine that uses single-phase power instead. If you have any questions, please call our Tech Support.\n                    \u003c\/em\u003e\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42699364991167,"sku":"G0652","price":3549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/g0652-b59efb51e2142f21a804188afd58bb93.webp?v=1759811286"},{"product_id":"grizzly-g9953zxf-16-x-99-3-phase-z-series-jointer-w-spiral-cutterhead","title":"Grizzly G9953ZXF - 16\" x 99\" 3-Phase Z Series Jointer w\/ Spiral Cutterhead","description":"\u003ch1\u003eG9953ZXF 16\" x 99\" 3-Phase Z Series Jointer w\/ Spiral Cutterhead\u003c\/h1\u003e\n\u003ch2\u003eThe extra capacity, power, and accuracy needed to get the job done more efficiently and effectively.\u003c\/h2\u003e \n\u003cp\u003eTipping the scales at 1650 pounds, the G9953ZXF features cast-iron throughout including the base, hardened and precision-ground tables, center-mounted fence and table elevation handwheels.\u003c\/p\u003e\n\u003cp\u003eThe spiral cutterhead is equipped with 120 indexable carbide inserts that can be rotated to reveal any one of their four cutting edges. Simply rotate each 90° to reveal a fresh cutting edge.\u003c\/p\u003e\n\u003cp\u003eThis provides up to 16\" wide cut for the finest finish available and a much quieter machine that's unlike any other.\u003c\/p\u003e\n\u003cp\u003eAn added safety feature is the cutterhead brake. It turns the machine off and brings the cutterhead to a rapid stop when the handle is rotated.\u003c\/p\u003e\n\u003cp\u003eThe G9953ZXF has fence stops that can be set at 90° or 45°. If you require a different angle, the fence can be locked in place anywhere between these angles.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/www.grizzly.com\/products\/grizzly-indexable-carbide-inserts-14-x-14-x-2mm-10-pack\/h7319\" target=\"_blank\"\u003eH7319\u003c\/a\u003e replacement inserts are available.\u003c\/p\u003e\n\u003cp\u003eThe G9953ZXF comes with a 1-year warranty covering parts and assuring the unit is free from factory defects.\u003c\/p\u003e\n\u003cp\u003eThe G9953ZXF manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your jointer.\u003c\/p\u003e\n\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are-U.S. based. Parts may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003cp style=\"color:red;\"\u003eMade in an ISO 9001 factory\u003c\/p\u003e \n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMotor: 5 HP, 220V\/440V* (prewired 220V), 3-phase, 14A\/7A\u003c\/li\u003e\n\u003cli\u003eMaximum width of cut: 16\"\n\u003c\/li\u003e\n\u003cli\u003eMaximum depth of cut: 5\/16\"\n\u003c\/li\u003e\n\u003cli\u003eCutterhead diameter: 4\"\n\u003c\/li\u003e\n\u003cli\u003eCutterhead type: 6-row spiral with 120 inserts\n\u003c\/li\u003e\n\u003cli\u003eInsert size and type: 14 x 14 x 2mm, indexable carbide\n\u003c\/li\u003e\n\u003cli\u003eCutterhead speed: 5000 RPM\n\u003c\/li\u003e\n\u003cli\u003eTable size: 99-1\/4 \"x 16-1\/4\"\n\u003c\/li\u003e\n\u003cli\u003eFence size: 43-1\/4\" L x 6-5\/8\" H\n\u003c\/li\u003e\n\u003cli\u003eMinimum stock length: 18\"\n\u003c\/li\u003e\n\u003cli\u003eMinimum stock thickness: 1\/2\"\n\u003c\/li\u003e\n\u003cli\u003eDust port size: 4\"\n\u003c\/li\u003e\n\u003cli\u003eFootprint: 23\" x 57\"\n\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 99-1\/4\" W x 45-1\/2\" D x 32\" H\n\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 1742 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eParallelogram tables with handwheel adjustment\n\u003c\/li\u003e\n\u003cli\u003ePrecision-ground cast-iron tables\n\u003c\/li\u003e\n\u003cli\u003eMagnetic switch with thermal overload protection\n\u003c\/li\u003e\n\u003cli\u003eSolid cabinet stand with noise-dampening system\n\u003c\/li\u003e\n\u003cli style=\"color:blue;\"\u003ePair of push blocks included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V.  We can rewire to 440V in a few days’ time for a fee of $385. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.\u003c\/em\u003e\n\u003c\/p\u003e\u003cp\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\n                    \u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42699381407935,"sku":"G9953ZXF","price":10399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/g9953zxf-b6a74525cdff2ec896117861b0c54a44.webp?v=1703875252"},{"product_id":"grizzly-h2934-37-20-hp-3-phase-double-head-wide-belt-sander","title":"Grizzly H2934 - 37\" 20 HP 3-Phase Double Head Wide-Belt Sander","description":"\u003ch1\u003eH2934 37\" 20 HP 3-Phase Double Head Wide-Belt Sander\u003c\/h1\u003e\n\u003ch2\u003eRarely can a machine claim to cut your sanding time in half.\u003c\/h2\u003e\n\u003cp\u003eThe G0447 37\" 20 HP 3-Phase Double Head Wide-Belt Sander features dual heads enabling them to sand to finer grits in a single pass!\n\u003c\/p\u003e\u003cp\u003eThe first belt runs on a single drum and the rear belt runs on a platen system which allows you to adjust the sanding depth.\n\u003c\/p\u003e\u003cp\u003eThe digital readout displays the table height in increments of 0.005\" for super-accurate results.\n\u003c\/p\u003e\u003cp\u003eThe feed rate is easily adjusted by turning the feed rate dial on the feed belt gear box.\n\u003c\/p\u003e\u003cp\u003eThe amperage draw meter, located above the control panel, monitors the amperage draw on the machine while performing sanding operations.\n\u003c\/p\u003e\u003cp\u003eFor a full range of replacement belts for the H2934, \u003ca href=\"https:\/\/www.grizzly.com\/search?q=SANDING+BELT\u0026amp;fq=(width:%2237+in.%22)(length:%2260+in.%22)\" target=\"_blank\"\u003eshop here\u003c\/a\u003e.\n\u003c\/p\u003e\u003ch3\u003eIf you are still sanding through two different grit levels using a single head wide-belt sander you are not being the most efficient.\u003c\/h3\u003e\n\u003cp\u003eLike all of the Grizzly wide-belt sanders, the H2934 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.)\n\u003c\/p\u003e\u003cp\u003eThe H2934 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander.\n\u003c\/p\u003e\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\n\u003c\/p\u003e\u003cp style=\"color:red;\"\u003eMade in an ISO 9001 factory\u003c\/p\u003e\n\u003cp style=\"color:red;\"\u003eCSA certified\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSanding motor HP: 20 HP, 220V\/440V* (prewired 220V), 3-phase, 50.3A\/25.1A\n\u003c\/li\u003e\n\u003cli\u003eConveyor motor HP: 1 HP, 3.4A\/1.7A\n\u003c\/li\u003e\n\u003cli\u003eTable lift motor HP: 1\/4 HP, 1.2A\/0.6A\n\u003c\/li\u003e\n\u003cli\u003eMaximum board width: 36-1\/2\"\n\u003c\/li\u003e\n\u003cli\u003eMaximum board thickness: 6\"\n\u003c\/li\u003e\n\u003cli\u003eMinimum board length: 14\"\n\u003c\/li\u003e\n\u003cli\u003eMinimum board thickness: 3\/16\"\n\u003c\/li\u003e\n\u003cli\u003eFront drum surface speed: 3500 FPM\n\u003c\/li\u003e\n\u003cli\u003eRear drum surface speed: 2600 FPM\n\u003c\/li\u003e\n\u003cli\u003eConveyor speed: 14–60 FPM\n\u003c\/li\u003e\n\u003cli\u003eSanding belt size: 37\" x 60\"\n\u003c\/li\u003e\n\u003cli\u003eAir requirement: 57–75 PSI, 12.3 CFM\n\u003c\/li\u003e\n\u003cli\u003eDust ports: 6 x 5\"\n\u003c\/li\u003e\n\u003cli\u003eFootprint: 52\" x 31\"\n\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 59-1\/2\" W x 54\" L x 68\" H\n\u003c\/li\u003e\n\u003cli\u003eApprox. shipping weight: 2461 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRubber pressure rollers\n\u003c\/li\u003e\n\u003cli\u003eHard rubber infeed drum\n\u003c\/li\u003e\n\u003cli\u003eAdjustable graphite platen\n\u003c\/li\u003e\n\u003cli\u003eDigital encoder depth control\n\u003c\/li\u003e\n\u003cli\u003eAmp\/load meter\n\u003c\/li\u003e\n\u003cli\u003eDisc brake for emergency stop\n\u003c\/li\u003e\n\u003cli\u003eVariable feed speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V.  We can rewire to 440V in a few days’ time for a fee of $385.  Please contact Grizzly Technical Support at (570) 546-9663 before placing your order. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\n                        \u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42699383242943,"sku":"H2934","price":19999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/h2934-f1807e5089c81de5b95eed42eaf56920.webp?v=1759811327"},{"product_id":"grizzly-g7213z-24-7-1-2-hp-3-phase-planer","title":"Grizzly G7213Z - 24\" 7-1\/2 HP 3-Phase Planer","description":"\u003ch1\u003eG7213Z 24\" 7-1\/2 HP 3-Phase Planer\u003c\/h1\u003e\n\u003ch2\u003ePlaning wide, solid wood panels? No problem! \u003c\/h2\u003e\n\u003cp\u003eDurability, dependability and capacity are the hallmarks of this massive machine. \u003c\/p\u003e\n\u003cp\u003eIf you’re looking for an industrial-duty planer that will outlast the building you put it in, the G7213Z 24\" Planer is the one!\u003c\/p\u003e\n\u003cp\u003eThe 7-1\/2 HP, 3-phase motor powers through the toughest hardwoods with ease.\n\u003c\/p\u003e\u003cp\u003ePlaning capacity is 24” thanks to the four high-speed steel knives (HSS) on the 3-1\/8” cutterhead. \u003c\/p\u003e\n\u003cp\u003eThe HSS knives have been heat treated for hardness and wear resistance, which keeps a sharp edge longer than other carbon steels.\n\u003c\/p\u003e\u003cp\u003eThe built-in chip deflector leads directly into the dust hood with a 5” dust port to help ensure the work area stays as clear as possible.\u003c\/p\u003e\n\u003cp\u003eLike all Grizzly planers, the G7213Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.)\n\u003c\/p\u003e\u003cp\u003eThe G7213Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information.\n\u003c\/p\u003e\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the planer may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMain motor: 7-1\/2 HP, 220V\/440V* (prewired 220V), 3-phase, 20A\/10A\u003c\/li\u003e\n\u003cli\u003eFeed motor: 2 HP, 6A\/3A\u003c\/li\u003e\n\u003cli\u003eMaximum stock width: 24\"\u003c\/li\u003e\n\u003cli\u003eMaximum stock thickness: 7\"\u003c\/li\u003e\n\u003cli\u003eMinimum stock thickness: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eMinimum stock length: 8\"\u003c\/li\u003e\n\u003cli\u003eMaximum cutting depth 6\" wide board: 1\/8\"\u003c\/li\u003e\n\u003cli\u003eMaximum cutting depth full width: 1\/16\"\u003c\/li\u003e\n\u003cli\u003eCutterhead diameter: 3-1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutterhead type: 4-knife\u003c\/li\u003e\n\u003cli\u003eKnife size \u0026amp; type: 24\" x 1\" x 1\/8\", HSS, single-sided, solid\u003c\/li\u003e\n\u003cli\u003eCutterhead speed: 5200 RPM\u003c\/li\u003e\n\u003cli\u003eFeed rate: Variable, 17–26 FPM\u003c\/li\u003e\n\u003cli\u003eTable size with extensions: 24-1\/8\" x 31-1\/8\"\u003c\/li\u003e\n\u003cli\u003eDust port size: 5\"\u003c\/li\u003e\n\u003cli\u003eFootprint: 20-1\/2\" x 24-1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 42\" W x 40-1\/2\" D x 37\" H\u003c\/li\u003e\n\u003cli\u003eApprox. shipping weight: 1130 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBoard return rollers\u003c\/li\u003e\n\u003cli\u003ePrecision-ground cast-iron table\u003c\/li\u003e\n\u003cli\u003eGrease fittings for cutterhead ball bearings\u003c\/li\u003e\n\u003cli\u003eHeavy-duty cast-iron construction throughout\u003c\/li\u003e\n\u003cli\u003eMagnetic switch with thermal overload protection\u003c\/li\u003e\n\u003cli\u003eLever-adjustable bed rollers\u003c\/li\u003e\n\u003cli\u003eHandwheel table height adjustment\u003c\/li\u003e\n\u003cli\u003eSegmented chip breaker and infeed roller\u003c\/li\u003e\n\u003cli\u003eFinely finished steel outfeed roller\u003c\/li\u003e\n\u003cli\u003eInch and metric scale increments\u003c\/li\u003e\n\u003cli\u003eDust covers protect vertical support columns and leadscrews\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V.  We can rewire to 440V in a few days’ time for a fee of $385.  Please contact Grizzly Technical Support at (570)546-9663 before placing your order. \u003c\/em\u003e\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42699404378303,"sku":"G7213Z","price":8399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/g7213z-642db159dabd9ee36779ec284841ecf5.webp?v=1703876961"},{"product_id":"grizzly-g7214z-7-1-2-hp-3-phase-spindle-shaper","title":"Grizzly G7214Z - 7-1\/2 HP 3-Phase Spindle Shaper","description":"\u003ch1\u003eG7214Z 7-1\/2 HP 3-Phase Spindle Shaper\u003c\/h1\u003e\n\u003ch2\u003eTurn big shaper cutters with confidence.\u003c\/h2\u003e\n\u003cp\u003eThe G7214Z 7-1\/2 HP 3-Phase Spindle Shaper was designed to handle cutters up to 5-7\/8\" diameter by 5-1\/8\" tall.\u003c\/p\u003e\n\u003cp\u003eThree interchangeable spindles of 3\/4\", 1\", and 1-1\/4\" can be swapped out with the included wrenches.\u003c\/p\u003e\n\u003cp\u003eThe four spindle speeds let you slow down those big cutters from 10,000 RPM to 3600 RPM.\u003c\/p\u003e\n\u003cp\u003eThe independently adjustable split fence allows you dial in for full edge cutting support.\u003c\/p\u003e\n\u003cp\u003eSpring-steel hold downs hold the workpiece flat on the table and increase safety and production.\u003c\/p\u003e\n\u003cp\u003eThe spindle enclosure guard protects from exposure to the cutter and chips thrown by it. It is adjustable to enclose as much of the spindle area as possible.\u003c\/p\u003e\n\u003ch3\u003eMake this professional spindle shaper a producer in your shop!\u003c\/h3\u003e\n\u003cp\u003eLike all Grizzly shapers, the G7214Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.)\u003c\/p\u003e\n\u003cp\u003eThe G7214Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information.\u003c\/p\u003e\n\u003cp\u003eThe complete and easy-to-read manual makes it easier to assemble and maintain your shaper.\u003c\/p\u003e\n\u003cp\u003eThe Grizzly Customer Service and Technical Support Teams are U.S. based.\u003c\/p\u003e\n\u003cp\u003eParts for the shaper may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMotor: 7-1\/2 HP, 220V\/440V* (prewired 220V), 3-phase, 20A\/10A\u003c\/li\u003e\n\u003cli\u003eMaximum cutter height: 5-1\/8\"\u003c\/li\u003e\n\u003cli\u003eMaximum cutter diameter: 5-7\/8\"\u003c\/li\u003e\n\u003cli\u003eSpindle diameters: 3\/4\", 1\", 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eSpindle lengths: 6\"–7\"\u003c\/li\u003e\n\u003cli\u003eSpindle capacity under nut: 4-1\/4\", 4-5\/8\", 5-1\/8\"\u003c\/li\u003e\n\u003cli\u003eSpindle speeds: 3600, 5100, 8000, 10,000 RPM\u003c\/li\u003e\n\u003cli\u003eSpindle travel: 3-1\/4\"\u003c\/li\u003e\n\u003cli\u003eSpindle insert sizes I.D.: 2\", 3\", 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003eSpindle insert sizes O.D.: 3\", 3-1\/2\", 7\"\u003c\/li\u003e\n\u003cli\u003eTable counterbore: 7\" dia. x 5\/8\" deep\u003c\/li\u003e\n\u003cli\u003eTable size: 28\" x 35-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFloor-to-table height: 34-3\/4\"\u003c\/li\u003e\n\u003cli\u003eFootprint: 26\" x 27\"\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 34-3\/4\" W x 35-1\/2\" D x 43\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 613 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFEATURES:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePrecision-ground cast-iron table\u003c\/li\u003e\n\u003cli\u003eCast-iron miter gauge adjusts 60° left\/right\u003c\/li\u003e\n\u003cli\u003eTwo wood fence faces\u003c\/li\u003e\n\u003cli\u003eFence adjustment includes built-In ratchets and knob-equipped adjusters\u003c\/li\u003e\n\u003cli\u003eIncludes three spindles with spacers and nuts\u003c\/li\u003e\n\u003cli\u003eSpindle height scale in inches and millimeters\u003c\/li\u003e\n\u003cli\u003eFour spring-steel hold-down assemblies\u003c\/li\u003e\n\u003cli\u003eThree table inserts: 7\" OD x 3-1\/2\" ID, 3-1\/2\" OD x 3\" ID, and 3\" OD x 2\" ID\u003c\/li\u003e\n\u003cli\u003eAssorted wrenches included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $385. Please contact Grizzly Technical Support at (570) 546-9663 before placing your order. \u003c\/em\u003e\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":42699405066431,"sku":"G7214Z","price":4999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/g7214z-dd22fa768203f079733fab7bd2bc27ea.webp?v=1703877038"},{"product_id":"south-bend-sb1096-37-15-hp-3-phase-wide-belt-sander","title":"South Bend SB1096 - 37\" 15 Hp 3-Phase Wide-Belt Sander","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eBuilt for industrial-level production work.\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe South Bend SB1096 37\" 15 HP 3-Phase Wide-Belt Sander is designed to meet the most rigorous demands of your professional shop.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeaturing a powerful 15 HP drum motor and independent motors with digital controls for table elevation and conveyor speed. You’ll have full control to dial in the exact settings you need for any job, from delicate 1\/8\" thick work to large tables and slabs.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe belt moves side to side automatically to get the best sanding results and prolong belt life.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdditional features include an amp\/load meter to monitor your machine’s performance, a built-in regulator\/water separator, and an emergency stop panel and disc brake for safety.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor a full range of replacement belts for the SB1096,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.grizzly.com\/search?q=SANDING+BELT\u0026amp;fq=(width:%2237+in.%22)(length:%2260+in.%22)\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.grizzly.com\/search?q=SANDING+BELT\u0026amp;fq=(width:%2237+in.%22)(length:%2260+in.%22)\" target=\"_blank\"\u003eshop here\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWhen you need continuous duty and dependability for your business, the SB1096 is the answer.\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis wide belt sander is built to true South Bend high-precision industrial standards and comes with a 2-year warranty.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe SB1096 manual was written by our U.S. based Technical Documentation Department and is packed with useful information.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe South Bend Customer Service and Technical Support Teams are U.S. based. Parts may be available online and shipped from the South Bend parts warehouse in Springfield, MO.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMotor: 15 HP, 220V\/440V*, 3-phase, 36.7A\/18.4A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConveyor feed motor: 1 HP, 3.4A\/1.7A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eElevation motor: 1\/4 HP, 1.2A\/0.6A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax. stock size: 36\" W x 5-3\/4\" T\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMin. stock size: 14\" L x 1\/8\" T\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSanding belt size: 37\" x 60\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSanding belt speed: 2600 FPM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSanding belt stroke: Variable, 5\/16\"-5\/8\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlaten size: 3-1\/2\" x 37-3\/4\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConveyor speed: Variable, 15-49 FPM\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNumber of dust ports: 3\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDust port size: 5\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir requirement: 75 PSI\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFootprint: 21-1\/2\" x 51-1\/2\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions: 81\" W x 50\" D x 66-1\/2\" H\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximate shipping weight: 1826 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFEATURES\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIndependent motor controls for sanding drum, table elevation, and feed conveyor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eKeypad controls for table elevation with digital readout accurate to 0.005\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdjustable sanding belt oscillation speed\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMicro-adjustable graphite\/felt platen\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAmp\/load meter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuilt-in air regulator\/water separator\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePneumatic belt tensioning\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRubber infeed and outfeed pressure rollers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEmergency stop panel and disc brake\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUS based customer service and technical support\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"South Bend","offers":[{"title":"Default Title","offer_id":42787626746047,"sku":"SB1096","price":16599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/ScreenShot2024-02-01at10.12.09PM.png?v=1706797066"},{"product_id":"dp1500g-11-worm-gear-2i04408-for-dp-1500g-drill-press","title":"DP1500G-11 Worm Gear (2I04408), for DP-1500G Drill Press","description":"\u003cdiv class=\"pdp-details\"\u003e\u003c\/div\u003e","brand":"Baileigh Industrial","offers":[{"title":"Default Title","offer_id":45479020429503,"sku":"BA9-1002876","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/BA9-1002876_Main.jpg?v=1775747703"},{"product_id":"dp1500g-c11-worm-wheel-2104408-for-dp-1500g-drill-press","title":"DP1500G-C11 Worm Wheel (2104408), for DP-1500G Drill Press","description":"\u003cdiv class=\"pdp-details\"\u003e\u003c\/div\u003e","brand":"Baileigh Industrial","offers":[{"title":"Default Title","offer_id":45479022002367,"sku":"BA9-1012774","price":93.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/BA9-1012774_Main.jpg?v=1775747754"},{"product_id":"16-x-40-variable-speed-lathe-with-dro","title":"16\" x 40\" Variable-Speed Lathe with DRO","description":"\u003cp\u003eSB1038F 16\" x 40\" Variable-Speed Lathe with DRO\u003c\/p\u003e\u003cp\u003eA high-capacity, variable-speed lathe built to close tolerances to ensure exceptional performance.\u003c\/p\u003e\u003cp\u003eThe most seasoned machinist will appreciate the features and functionality of the SB1038F 16\" x 40\" Lathe.\u003c\/p\u003e\u003cp\u003eThe dial-controlled, electronically variable spindle speed between 20–2500 RPM is displayed on a 2-axis Fagor digital readout.\u003c\/p\u003e\u003cp\u003eThe bed of the lathe is constructed with Meehanite® castings that are hardened and precision-ground in the traditional three V-way prismatic design.\u003c\/p\u003e\u003cp\u003eThe headstocks feature quick-change gear levers and the carriages include an adjustable clutch that disables automatic carriage feed when it contacts the feed stop or in the event of a crash.\u003c\/p\u003e\u003cp\u003eThe spindles are D1-6 camlock with an MT#6 taper and 2.0625\" bore. The tailstocks have an MT#4 taper and 6\" of quill travel.\u003c\/p\u003e\u003cp\u003eQuality Allen-Bradley® electrical components and attention to detail provide dependable electrical control of the powered movements.\u003c\/p\u003e\u003cp\u003eAnd finally, this lathe comes with a circulating coolant system.\u003c\/p\u003e\u003cp\u003eThe SB1038F manual was written by our U.S.-based Technical Documentation Department and is packed with useful information.\u003c\/p\u003e\u003cp\u003eAll South Bend lathes come with a 2-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\u003cp\u003eParts for the lathe may be available online and shipped from the South Bend parts warehouse in Springfield, MO.\u003c\/p\u003e\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSpindle motor: 7-1\/2 HP, 440V, 3-phase, 11A\u003c\/li\u003e\n\u003cli\u003eCoolant pump motor: 1\/8 HP, 440V\u003c\/li\u003e\n\u003cli\u003eOil pump motor: 1\/4 HP, 440V\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 16\"\u003c\/li\u003e\n\u003cli\u003eDistance between centers: 40\"\u003c\/li\u003e\n\u003cli\u003eSwing over cross slide: 10-3\/8\"\u003c\/li\u003e\n\u003cli\u003eSwing over gap: 22.95\"\u003c\/li\u003e\n\u003cli\u003eWidth of bed: 10-1\/4\"\u003c\/li\u003e\n\u003cli\u003eCross slide travel: 9-1\/4\"\u003c\/li\u003e\n\u003cli\u003eCompound slide travel: 5.1\"\u003c\/li\u003e\n\u003cli\u003eSpindle nose: D1-5 camlock\u003c\/li\u003e\n\u003cli\u003eSpindle taper: MT #6\u003c\/li\u003e\n\u003cli\u003eSpindle speed: Variable, 20–2500 RPM\u003c\/li\u003e\n\u003cli\u003eTailstock taper: MT #4\u003c\/li\u003e\n\u003cli\u003eTailstock travel: 6\"\u003c\/li\u003e\n\u003cli\u003eInch thread range: 2 to 72 TPI (45 pitches)\u003c\/li\u003e\n\u003cli\u003eMetric thread range: 0.2 to 14 mm (39 pitches)\u003c\/li\u003e\n\u003cli\u003eModular threads: 0.3 to 3.5 (18 pitches)\u003c\/li\u003e\n\u003cli\u003eDiametral threads: 8 to 44 (21 pitches)\u003c\/li\u003e\n\u003cli\u003eLongitudinal feeds: 0.002 to 0.067 IPR (17)\u003c\/li\u003e\n\u003cli\u003eCross feeds: 0.001 to 0.034 IPR (17)Footprint: 82\" x 19-1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 86\" W x 33\" D x 61\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 3132 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFEATURES\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFagor 2-axis DRO\u003c\/li\u003e\n\u003cli\u003eMeehanite® castings\u003c\/li\u003e\n\u003cli\u003eSignature South Bend three V-way bed\u003c\/li\u003e\n\u003cli\u003eAllen-Bradley® controls\u003c\/li\u003e\n\u003cli\u003eNSK or NTN Japanese spindle bearings\u003c\/li\u003e\n\u003cli\u003eFull-length splash guard\u003c\/li\u003e\n\u003cli\u003eFront removable sliding chip tray\u003c\/li\u003e\n\u003cli\u003eMicrometer carriage stop\u003c\/li\u003e\n\u003cli\u003eThreading dial indicator\u003c\/li\u003e\n\u003cli\u003e9\" 3-Jaw scroll chuck w\/ D1-6 back plate\u003c\/li\u003e\n\u003cli\u003e10\" 4-Jaw chuck D1-6\u003c\/li\u003e\n\u003cli\u003e12\" Faceplate D1-6\u003c\/li\u003e\n\u003cli\u003eU.S.-based customer service and technical support\u003c\/li\u003e\n\u003cli\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"South Bend","offers":[{"title":"Default Title","offer_id":45763548348607,"sku":"SB1038F","price":30099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/sb1038f-f7c75da3e14596833985abd3257655f8.jpg?v=1782185868"},{"product_id":"51-30-hp-3-phase-extreme-series-wide-belt-sander","title":"51\" 30 HP 3-Phase Extreme Series Wide-Belt Sander","description":"\u003cp\u003eG0411 51\" 30 HP 3-Phase Extreme Series Wide-Belt Sander\u003c\/p\u003e\u003cp\u003ePower through large-scale sanding production with this industrial-grade wide-belt sander.\u003c\/p\u003e\u003cp\u003eGet your professional woodworking shop up to full speed by adding this wide-belt sander to your equipment lineup.\u003c\/p\u003e\u003cp\u003eFitted with a robust 30 HP motor, the sander turns out exceptional quality, consistently smooth workpieces so you can meet every deadline.\u003c\/p\u003e\u003cp\u003eSpecial options on this 51\" wide-belt sander include a VFD for variable-speed operation, user-friendly touch screen controls, thickness sensor, clear side window, and interior lighting.\u003c\/p\u003e\u003cp\u003eThis sander is ready to enhance shop efficiency whether you are sanding oversized panels for architectural millwork, smoothing complex raised panel profiles, or processing extensive production runs with speed and accuracy.FEATURES \u0026amp; BENEFITS:\u003c\/p\u003e\u003cp\u003eVariable frequency drive (VFD) for efficient, high-torque variable speed using single-phase powerA platen offers even pressure for fine sanding with a smooth finish\u003c\/p\u003e\u003cp\u003eTouch-screen controls for motors, sanding drum, conveyor, and table elevation\u003c\/p\u003e\u003cp\u003eMaterial thickness sensor automatically adjusts the table to the thickness of your workpiece\u003c\/p\u003e\u003cp\u003ePlexiglass side window and interior lights for easy viewing of sanding belt tracking\u003c\/p\u003e\u003cp\u003eVariable-speed feed conveyor for adaptability and optimal sanding results\u003c\/p\u003e\u003cp\u003ePneumatic belt tracking and tensioning to maintain the perfect pressure for accurate sanding\u003c\/p\u003e\u003cp\u003eAmp\/load meter to prevent excessive loads while maximizing machine capacity\u003c\/p\u003e\u003cp\u003eBuilt-in air regulator\/water separator to protect pneumatic components\u003c\/p\u003e\u003cp\u003eRubber infeed and outfeed pressure rollers prevent uneven sanding and dampen vibration\u003c\/p\u003e\u003cp\u003eDisc brake, emergency stop bar, and stop switch for optimal safetySPECIFICATIONS:\u003c\/p\u003e\u003cp\u003eMain motor: 30 HP, 220V\/440V*, 3-phase, 72A\/36A\u003c\/p\u003e\u003cp\u003eConveyor feed motor: 2 HP, 6A\u003c\/p\u003e\u003cp\u003eTable elevation motor: 1\/4 HP, 1.2A\u003c\/p\u003e\u003cp\u003eMaximum board width: 51\"\u003c\/p\u003e\u003cp\u003eMaximum board thickness: 6\"\u003c\/p\u003e\u003cp\u003eMinimum board length: 14\"\u003c\/p\u003e\u003cp\u003eMinimum board thickness: 3\/16\"\u003c\/p\u003e\u003cp\u003eConveyor speed: 14-60 FPM\u003c\/p\u003e\u003cp\u003eSanding belt speed: 2565 FPM\u003c\/p\u003e\u003cp\u003eSanding belt size: 51\" x 60\"\u003c\/p\u003e\u003cp\u003eSanding belt oscillations: 35-40 OPM\u003c\/p\u003e\u003cp\u003eAir requirement: 75 PSI\u003c\/p\u003e\u003cp\u003eFootprint: 68\" x 20-1\/2\"\u003c\/p\u003e\u003cp\u003eOverall dimensions: 70\" W x 48\" D x 65\" H\u003c\/p\u003e\u003cp\u003eApproximate shipping weight: 2822 lbs.\u003c\/p\u003e\u003cp\u003eThis 51\" 30 HP wide-belt sander is ready for extended production runs of wide panels and specializes in precision finish sanding.Our U.S.-based Technical Documentation Department produces detailed owner's manuals and instruction sheets, empowering your team to optimize equipment performance and minimize downtime.\u003c\/p\u003e\u003cp\u003eComprehensive U.S.-Based Support:\u003c\/p\u003e\u003cp\u003eOur experts provide a full range of support services including troubleshooting, maintenance tips, and parts sourcing. The 1-year warranty on the G0411 safeguards your investment, offering peace of mind and ensuring long-term reliability.Made in an ISO 9001 factory*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee. Please contact Grizzly Technical Support at (570) 546-9663 before placing your order.\u003c\/p\u003e","brand":"Grizzly","offers":[{"title":"Default Title","offer_id":45763590947007,"sku":"G0411","price":27299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/g0411-5d1bc7b2b15975069332372c3e84cf29.jpg?v=1782186637"},{"product_id":"14-x-40-440v-electronic-variable-speed-toolroom-lathe-with-fagor-dro","title":"14\" x 40\" 440V Electronic Variable-Speed Toolroom Lathe with Fagor DRO","description":"\u003cp\u003eSB1013F 14\" x 40\" EVS 440V Toolroom Lathe with Fagor DRO\u003c\/p\u003e\u003cp\u003eFor when EVS is the minimum you require on a 440V lathe.\u003c\/p\u003e\u003cp\u003eThe electronic variable-speed (EVS) spindle control of the SB1013F allows the operator to quickly set the exact spindle speed within the available range of 20–2500 RPM. Spindle speed is displayed on the digital readout.\u003c\/p\u003e\u003cp\u003eThe beds are constructed with Meehanite® castings that have been precision-ground and hardened in the traditional three-V prismatic design.\u003c\/p\u003e\u003cp\u003eThe feed rod includes a slip clutch that disables automatic carriage feed in the event of a crash or when it contacts the feed stop.\u003c\/p\u003e\u003cp\u003eThe spindles are the D1-6 camlock type with an MT#6 taper and 2.0625\" bore. The tailstock quills offer 6\" of travel and have a MT#4 taper.\u003c\/p\u003e\u003cp\u003eThe SB1013F manual was written by our U.S.-based Technical Documentation Department. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your lathe.\u003c\/p\u003e\u003cp\u003eThe South Bend Technical Support team is U.S.-based. Parts for the lathe may be available online and shipped from the parts warehouse in Springfield, MO.\u003c\/p\u003e\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRequired power source: 440V, 3-phase, min. 15A circuit\u003c\/li\u003e\n\u003cli\u003eSpindle Motor: 5 HP, 440V\u003c\/li\u003e\n\u003cli\u003eOil pump motor: 1\/4 HP\u003c\/li\u003e\n\u003cli\u003eCoolant Pump Motor: 1\/8 HP\u003c\/li\u003e\n\u003cli\u003eBed width: 10.25\"\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 14.17\"\u003c\/li\u003e\n\u003cli\u003eSwing over saddle: 13.78\"\u003c\/li\u003e\n\u003cli\u003eSwing over gap: 20.98”\u003c\/li\u003e\n\u003cli\u003eDistance between centers: 40.00\"\u003c\/li\u003e\n\u003cli\u003eCross slide travel: 9.25”\u003c\/li\u003e\n\u003cli\u003eCompound slide travel: 5.10”\u003c\/li\u003e\n\u003cli\u003eCarriage travel: 38.58”\u003c\/li\u003e\n\u003cli\u003eSpindle nose: D1-6 camlock\u003c\/li\u003e\n\u003cli\u003eSpindle taper: MT#6\u003c\/li\u003e\n\u003cli\u003eSpindle speeds: Variable, 20–2500 RPM\u003c\/li\u003e\n\u003cli\u003eTailstock taper: MT#4\u003c\/li\u003e\n\u003cli\u003eTailstock quill travel: 6.00\"\u003c\/li\u003e\n\u003cli\u003eInch threads: (45) 2–72 TPI\u003c\/li\u003e\n\u003cli\u003eMetric threads: (39) 0.20–14.00mm\u003c\/li\u003e\n\u003cli\u003eModular pitches: (18) 0.30–3.5 MP\u003c\/li\u003e\n\u003cli\u003eDiametral pitches: (21) 8–44.00 DP\u003c\/li\u003e\n\u003cli\u003eLongitudinal feeds: (17) 0.002–0.067 IPR\u003c\/li\u003e\n\u003cli\u003eCross feeds: (17) 0.001–0.034 IPR\u003c\/li\u003e\n\u003cli\u003eMaximum tool bit size:3\/4\"\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 91-1\/2\" W x 39-1\/2\" D x 59\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 2984 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFEATURES\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2-year limited warranty\u003c\/li\u003e\n\u003cli\u003eFagor 2-axis DRO\u003c\/li\u003e\n\u003cli\u003eMeehanite® castings\u003c\/li\u003e\n\u003cli\u003eAllen-Bradley® controls\u003c\/li\u003e\n\u003cli\u003eFull-length splash guard\u003c\/li\u003e\n\u003cli\u003eFront-removable sliding chip tray\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eINCLUDES:\u003c\/p\u003e\u003cp\u003e8\" 3-Jaw scroll chuck w\/ D1-6 plate\u003c\/p\u003e\u003cp\u003e10\" 4-Jaw independent chuck D1-6\u003c\/p\u003e\u003cp\u003e12\" Faceplate\u003c\/p\u003e\u003cp\u003eFollow rest\u003c\/p\u003e\u003cp\u003eFteady rest with roller bearing tips\u003c\/p\u003e\u003cp\u003e#6 to #4 Morse taper spindle sleeve\u003c\/p\u003e\u003cp\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/p\u003e","brand":"South Bend","offers":[{"title":"Default Title","offer_id":45771291001023,"sku":"SB1013F","price":28699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/sb1013f-dfbf191fb5f869029c9aee5466494d7d.jpg?v=1782348067"},{"product_id":"16-x-60-evs-toolroom-lathe-with-fagor-dro","title":"16\" x 60\" EVS Toolroom Lathe with Fagor DRO","description":"\u003cp\u003eSB1015F 16\" x 60\" EVS Toolroom Lathe with Fagor DRO\u003c\/p\u003e\u003cp\u003eAs the name implies, the South Bend 16\" x 60\" EVS Toolroom Lathe feature EVS (Electronic Variable-Speed) spindle control, which allows the operator to quickly set the exact spindle speed within the available range of 20–2500 RPM.\u003c\/p\u003e\u003cp\u003eSpindle speed is displayed on a Fagor digital readout and controlled within each speed range with the use of a dial—no changing gears or looking up complex lever positions on a chart.\u003c\/p\u003e\u003cp\u003eThe beds of these lathes are constructed with Meehanite® castings that have been precision hardened and ground in the traditional 3-V prismatic design—long used on South Bend Lathes for its accuracy, durability and rigidity.\u003c\/p\u003e\u003cp\u003eThe headstock features quick-change gear levers and an adjustable clutch mechanism for the feed rod that can be set to prevent damage in the event of a crash.\u003c\/p\u003e\u003cp\u003eTo further ensure a high degree of accuracy, these lathes are equipped with NSK or NTN spindle bearings.\u003c\/p\u003e\u003cp\u003eThe SB1015F manual was written by our U.S.-based Technical Documentation Department.\u003c\/p\u003e\u003cp\u003eAll South Bend lathes come with a 2-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\u003cp\u003eThe South Bend Technical Support team is U.S.-based. Parts for the lathe may be available online and shipped from the parts warehouse in Springfield, MO.\u003c\/p\u003e\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSpindle motor: 7-1\/2 HP, 440V, 3-phase, 11A\u003c\/li\u003e\n\u003cli\u003eCoolant motor: 1\/8 HP, 0.18A\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 16\"\u003c\/li\u003e\n\u003cli\u003eDistance between centers: 60\"\u003c\/li\u003e\n\u003cli\u003eSwing over cross slide: 10-3\/8\"\u003c\/li\u003e\n\u003cli\u003eSwing over gap: 22.95\"\u003c\/li\u003e\n\u003cli\u003eCross slide travel: 9.25\"\u003c\/li\u003e\n\u003cli\u003eCompound slide travel: 5.1\"\u003c\/li\u003e\n\u003cli\u003eSpindle nose: D1-6 Camlock\u003c\/li\u003e\n\u003cli\u003eSpindle bore: 2.0625\"\u003c\/li\u003e\n\u003cli\u003eTaper inside spindle: MT#6\u003c\/li\u003e\n\u003cli\u003eSpindle speed: Variable, 20–2500 RPM\u003c\/li\u003e\n\u003cli\u003eInch threads: (45) 2 to 72 TPI\u003c\/li\u003e\n\u003cli\u003eMetric threads: (39) 0.2 to 14mm\u003c\/li\u003e\n\u003cli\u003eModular threads: (18) 0.3 to 3.5\u003c\/li\u003e\n\u003cli\u003eDiametral threads: (21) 8 to 44\u003c\/li\u003e\n\u003cli\u003eLongitudinal feed: 0.002 to 0.067 IPR\u003c\/li\u003e\n\u003cli\u003eCross feed: 0.001 to 0.034 IPR\u003c\/li\u003e\n\u003cli\u003eNumber of feed selections: 17\u003c\/li\u003e\n\u003cli\u003eTailstock barrel diameter: 2.047\"\u003c\/li\u003e\n\u003cli\u003eTailstock quill travel: 6\"\u003c\/li\u003e\n\u003cli\u003eTailstock taper: MT#4\u003c\/li\u003e\n\u003cli\u003eFootprint: 19-1\/2\" x 101-7\/8\"\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 3488 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFEATURES\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFagor 2-axis DRO\u003c\/li\u003e\n\u003cli\u003eMeehanite® casting, signature South Bend 3 V-way bed\u003c\/li\u003e\n\u003cli\u003eYaskawa frequency drive\u003c\/li\u003e\n\u003cli\u003eCentralized lubrication pump for bed-ways and cross slide\u003c\/li\u003e\n\u003cli\u003eFull-length emergency foot brake\u003c\/li\u003e\n\u003cli\u003e9\" 3-Jaw scroll chuck\u003c\/li\u003e\n\u003cli\u003e10\" 4-Jaw independent chuck\u003c\/li\u003e\n\u003cli\u003e12\" faceplate\u003c\/li\u003e\n\u003cli\u003eU.S.-based customer service and technical support\u003c\/li\u003e\n\u003cli\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"South Bend","offers":[{"title":"Default Title","offer_id":45771291394239,"sku":"SB1015F","price":31199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/sb1015f-a4850397467b546148ceaefce70451e9.jpg?v=1782348072"},{"product_id":"21-x-120-turn-nado-evs-lathe-with-dro","title":"21\" x 120\" Turn-Nado EVS Lathe with DRO","description":"\u003cp\u003eSB1045PF 21\" x 120\" Turn-Nado EVS Lathe with DRO\u003c\/p\u003e\u003cp\u003eThe EVS (electronic variable-speed) spindle speed of the SB1045PF 21\" x 120\" Turn-Nado EVS Lathe allows for dialing in the perfect cutting speed.\u003c\/p\u003e\u003cp\u003eA factory-installed Fagor digital readout displays the positioning of the carriage and cross slide.\u003c\/p\u003e\u003cp\u003eThe spindle speed dial fine tunes the exact speed within the selected range between 18-1800 RPM.\u003c\/p\u003e\u003cp\u003eSpindle speed is displayed on the digital readout conveniently located on the control panel.\u003c\/p\u003e\u003cp\u003eThe spindles are D1-8 camlock with an MT#7 taper and 3.15\" bore. The tailstocks have an MT#5 taper and 6-1\/2\" of quill travel.\u003c\/p\u003e\u003cp\u003eBoth the carriage and cross slide have power feed capability when the carriage is engaged with the feed rod.\u003c\/p\u003e\u003cp\u003eThe headstocks are equipped with a pressurized oiling system that lubricates the bearings and gears before the spindle starts.\u003c\/p\u003e\u003cp\u003eThe bed of the lathe is constructed with Meehanite® castings that are hardened and precision-ground in the traditional three V-way prismatic design.\u003c\/p\u003e\u003cp\u003eTo reduce the time spent doing daily lubrication, this lathe is outfitted with an one-shot lubrication system that is as quick and easy as one pump of a lever.\u003c\/p\u003e\u003cp\u003eAnd finally, this lathe comes with a circulating coolant system.\u003c\/p\u003e\u003cp\u003eThe SB1045PF manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The easy-to-read manual provides full instructions on how to maintain your lathe.\u003c\/p\u003e\u003cp\u003eLike all South Bend lathes, the SB1045PF comes with a 2-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\u003cp\u003eParts for the lathe may be available online and shipped from the South Bend parts warehouse in Springfield, MO.\u003c\/p\u003e\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSpindle motor: 12-1\/2 HP, 440V, 3-phase, 18A\u003c\/li\u003e\n\u003cli\u003eCoolant pump motor: 1\/8 HP, 440V\u003c\/li\u003e\n\u003cli\u003eOil pump motor: 1\/4 HP, 440V\u003c\/li\u003e\n\u003cli\u003eDistance between centers: 120\"\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 21\"\u003c\/li\u003e\n\u003cli\u003eSwing over cross slide: 14\"\u003c\/li\u003e\n\u003cli\u003eWidth of bed: 13.58\"\u003c\/li\u003e\n\u003cli\u003eCross slide travel: 11\"\u003c\/li\u003e\n\u003cli\u003eCompound slide travel: 5.39\"\u003c\/li\u003e\n\u003cli\u003eSpindle nose: D1-8 camlock\u003c\/li\u003e\n\u003cli\u003eSpindle taper: MT #7\u003c\/li\u003e\n\u003cli\u003eSpindle speed: Variable, 18–1800 RPM\u003c\/li\u003e\n\u003cli\u003eTailstock taper: MT #5\u003c\/li\u003e\n\u003cli\u003eTailstock travel: 6-1\/2\"\u003c\/li\u003e\n\u003cli\u003eInch thread range: 2 to 72 TPI (38 pitches)\u003c\/li\u003e\n\u003cli\u003eMetric thread range: 0.4 to 14 mm (40 pitches)\u003c\/li\u003e\n\u003cli\u003eModular threads: 0.3 to 3.5 (18 pitches)\u003c\/li\u003e\n\u003cli\u003eDiametral threads: 8 to 44 (21 pitches)\u003c\/li\u003e\n\u003cli\u003eLongitudinal feeds: 0.0015 to 0.0400 IPR (15)\u003c\/li\u003e\n\u003cli\u003eCross feeds: 0.001 to 0.034 IPR (15)\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 169-3\/4\" W x 27\" D x 62-1\/4\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 7407 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFEATURES\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFagor 2-axis DRO\u003c\/li\u003e\n\u003cli\u003eMeehanite® castings\u003c\/li\u003e\n\u003cli\u003eAllen-Bradley® controls\u003c\/li\u003e\n\u003cli\u003e12\" 3-Jaw scroll chuck\u003c\/li\u003e\n\u003cli\u003e14\" 4-Jaw independent chuck D1-8\u003c\/li\u003e\n\u003cli\u003e14\" Faceplate\u003c\/li\u003e\n\u003cli\u003eU.S.-based customer service and technical support\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/p\u003e","brand":"South Bend","offers":[{"title":"Default Title","offer_id":45771291492543,"sku":"SB1045PF","price":67099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/sb1045pf-b2d4549884ac3a8cbdef2e95d4f09721.jpg?v=1782348088"},{"product_id":"21-x-80-turn-nado-gearhead-lathe-with-dro","title":"21\" x 80\" Turn-Nado Gearhead Lathe with DRO","description":"\u003cp\u003eSB1047PF 21\" x 80\" Turn-Nado Gearhead Lathe with DRO\u003c\/p\u003e\u003cp\u003eA gearhead lathe built for daily use in a busy industrial setting.\u003c\/p\u003e\u003cp\u003eThe SB1047PF 21\" x 80\" Turn-Nado Gearhead Lathe is driven by a fixed speed 15 HP motor with quick-change gear levers to control the 16 spindle speeds between 20–1600 RPM.\u003c\/p\u003e\u003cp\u003eIt features a spindle clutch that allows the operator to switch between forward and reverse without shutting down the motor—a great time saver.\u003c\/p\u003e\u003cp\u003eTo further ensure a high degree of accuracy, this lathe is equipped with high-quality spindle bearings. The spindles are D1-8 camlock with an MT#7 taper and 3.15\" bore. The tailstocks have an MT#5 taper and 6-1\/2\" of quill travel.\u003c\/p\u003e\u003cp\u003eA factory-installed Fagor digital readout displays the positioning of the carriage and cross slide.\u003c\/p\u003e\u003cp\u003eThe headstock is equipped with a pressurized oiling system that pre-lubricates the bearings and gears before the spindle starts.\u003c\/p\u003e\u003cp\u003eThe bed of the lathe is constructed with Meehanite® castings that are hardened and precision-ground in the traditional three V-way prismatic design.\u003c\/p\u003e\u003cp\u003eQuality Allen-Bradley® electrical components and attention to detail provide dependable electrical control of the powered movements.\u003c\/p\u003e\u003cp\u003eThe SB1047PF manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your lathe.\u003c\/p\u003e\u003cp\u003eAll South Bend lathes come with a 2-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\u003cp\u003eParts for the lathe may be available online and shipped from the South Bend parts warehouse in Springfield, MO.\u003c\/p\u003e\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSpindle motor: 15 HP, 440V, 3-phase, 19A\u003c\/li\u003e\n\u003cli\u003eCoolant pump motor: 1\/8 HP, 0.23A\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 21\"\u003c\/li\u003e\n\u003cli\u003eDistance between centers: 80\"\u003c\/li\u003e\n\u003cli\u003eSwing over cross slide: 14\"\u003c\/li\u003e\n\u003cli\u003eSwing over saddle: 21\"\u003c\/li\u003e\n\u003cli\u003eSwing over gap: 31\"\u003c\/li\u003e\n\u003cli\u003eMaximum tool bit size: 1\"\u003c\/li\u003e\n\u003cli\u003eCarriage travel: 79\"\u003c\/li\u003e\n\u003cli\u003eCompound travel: 5.39\"\u003c\/li\u003e\n\u003cli\u003eCross slide travel: 11\"\u003c\/li\u003e\n\u003cli\u003eSpindle speeds: Variable, 20–1600 RPM\u003c\/li\u003e\n\u003cli\u003eLongitudinal feeds: 0.0015 to 0.0400 IPR (15)\u003c\/li\u003e\n\u003cli\u003eCross feeds: 0.00075 to 0.020 IPR (15)\u003c\/li\u003e\n\u003cli\u003eInch thread range: 2 to 72 TPI (38 pitches)\u003c\/li\u003e\n\u003cli\u003eMetric thread range: 0.4 to 14 mm (40 pitches)\u003c\/li\u003e\n\u003cli\u003eModular threads: 0.3 to 3.5 (18 pitches)\u003c\/li\u003e\n\u003cli\u003eDiametral threads: 8 to 44 (21 pitches)\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 130-1\/4\" W x 27\" D x 54-3\/4\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 6020 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFEATURES\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFagor 2-axis DRO\u003c\/li\u003e\n\u003cli\u003eMeehanite® castings\u003c\/li\u003e\n\u003cli\u003eAllen-Bradley® controls\u003c\/li\u003e\n\u003cli\u003eSKF spindle bearings\u003c\/li\u003e\n\u003cli\u003e14\" 4-jaw independent chuck D1-8\u003c\/li\u003e\n\u003cli\u003e12\" 3-jaw scroll chuck mounted to D1-8 plate\u003c\/li\u003e\n\u003cli\u003eU.S.-based customer service and technical support\u003c\/li\u003e\n\u003cli\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"South Bend","offers":[{"title":"Default Title","offer_id":45771291525311,"sku":"SB1047PF","price":50799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/sb1047pf-f1edd1c71be2b46999180ba01790e221.jpg?v=1782348103"},{"product_id":"16-x-60-gearhead-lathe-with-dro","title":"16\" x 60\" Gearhead Lathe with DRO","description":"\u003cp\u003eSB1055F 16\" x 60\" Gearhead Lathe with DRO\u003c\/p\u003e\u003cp\u003eA lathe to handle years of demanding industrial production and manufacturing tasks.\u003c\/p\u003e\u003cp\u003eThe SB1055F 16\" x 60\" Gearhead Lathe is driven by a two-speed 7-1\/2 HP motor with quick-change gear levers to control the 16 spindle speeds between 40–2000 RPM.\u003c\/p\u003e\u003cp\u003eThe spindles are D1-6 camlock with an MT#6 taper and 2-1\/16\" bore. The tailstock has an MT#4 taper and 6\" of quill travel.\u003c\/p\u003e\u003cp\u003eA factory-installed Fagor two-axis 20iT digital readout prominently displays the positioning of the carriage and cross slide.\u003c\/p\u003e\u003cp\u003eThe headstocks are equipped with a pressurized oiling system that pre-lubricates the bearings and gears before the spindle starts.\u003c\/p\u003e\u003cp\u003eThe bed of the lathe is constructed with patented Meehanite-processed castings that are hardened and precision-ground in the traditional three V-way prismatic design.\u003c\/p\u003e\u003cp\u003eThe bed of the lathe is constructed with Meehanite® castings that are hardened and precision-ground in the traditional three V-way prismatic design.\u003c\/p\u003e\u003cp\u003eQuality Allen-Bradley® electrical components and attention to detail provide dependable electrical control of the powered movements.\u003c\/p\u003e\u003cp\u003eThe SB1055F manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your lathe.Like all South Bend lathes, it comes with a 2-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\u003cp\u003eThe South Bend Customer Service and Technical Support Teams are U.S.-based. Parts for the lathe may be available online and shipped from the South Bend parts warehouse in Springfield, MO.\u003c\/p\u003e\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSpindle motor: 7-1\/2 HP, 440V, 3-phase, 10A at 1725 RPM, 9A at 850 RPM\u003c\/li\u003e\n\u003cli\u003eCoolant pump motor: 1\/8 HP\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 16-1\/8\"\u003c\/li\u003e\n\u003cli\u003eDistance between centers: 60\"\u003c\/li\u003e\n\u003cli\u003eSwing over cross slide: 10-3\/8\"\u003c\/li\u003e\n\u003cli\u003eSwing over saddle: 15-3\/4\"\u003c\/li\u003e\n\u003cli\u003eSwing over gap: 22.95\"\u003c\/li\u003e\n\u003cli\u003eMaximum tool bit size: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eCarriage travel: 54\"\u003c\/li\u003e\n\u003cli\u003eCompound travel: 5.1\"\u003c\/li\u003e\n\u003cli\u003eCross slide travel: 9\"\u003c\/li\u003e\n\u003cli\u003eSpindle speeds: Variable, 40–2000 RPM\u003c\/li\u003e\n\u003cli\u003eLongitudinal feeds: 0.002–0.067 IPR (17)\u003c\/li\u003e\n\u003cli\u003eCross feeds: 0.001–0.034 IPR (17)\u003c\/li\u003e\n\u003cli\u003eInch thread range: 2–72 TPI (45 pitches)\u003c\/li\u003e\n\u003cli\u003eMetric thread range: 0.2–14mm (39 pitches)\u003c\/li\u003e\n\u003cli\u003eModular threads: 0.3–3.5 (18 pitches)\u003c\/li\u003e\n\u003cli\u003eDiametral threads: 8–44 (21 pitches)\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 105-1\/2\" W x 32-3\/4\" D x 49\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 3652 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFEATURES\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFagor 2-axis DRO\u003c\/li\u003e\n\u003cli\u003eMeehanite® castings\u003c\/li\u003e\n\u003cli\u003eAllen-Bradley® controls\u003c\/li\u003e\n\u003cli\u003eFull length splash guard\u003c\/li\u003e\n\u003cli\u003eFront removable sliding chip tray\u003c\/li\u003e\n\u003cli\u003eNTN spindle bearings\u003c\/li\u003e\n\u003cli\u003eMicrometer carriage stop\u003c\/li\u003e\n\u003cli\u003e10\" 4-Jaw independent chuck D1-6\u003c\/li\u003e\n\u003cli\u003e9\" 3-Jaw scroll chuck mounted to D1-6 plate\u003c\/li\u003e\n\u003cli\u003eU.S.-based customer service and technical support\u003c\/li\u003e\n\u003cli\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"South Bend","offers":[{"title":"Default Title","offer_id":45771291721919,"sku":"SB1055F","price":30599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/sb1055f-b9a0ee23ace0a5b0619f3f78b96ba1ee.jpg?v=1782348145"},{"product_id":"18-x-60-turn-nado-evs-lathe-with-dro","title":"18\" x 60\" Turn-Nado EVS Lathe with DRO","description":"\u003cp\u003eSB1060PF 18\" x 60\" Turn-Nado EVS Lathe with DRO\u003c\/p\u003e\u003cp\u003eThe EVS (electronic variable speed) spindle speed of the SB1060PF 18\" x 60\" Lathe allows for dialing in the perfect cutting speed.\u003c\/p\u003e\u003cp\u003eThe spindle speed dial fine tunes the exact speed within the selected range between 18–1800 RPM.\u003c\/p\u003e\u003cp\u003eThe spindle has a D1-8 camlock with an MT#7 taper and 3.15\" bore. The tailstock has an MT#5 taper with 6-1\/2\" of quill travel.\u003c\/p\u003e\u003cp\u003eSpindle speed is displayed on the digital readout conveniently located on the control panel.\u003c\/p\u003e\u003cp\u003eA factory-installed Fagor digital readout displays the positioning of the carriage and cross slide.\u003c\/p\u003e\u003cp\u003eBoth the carriage and cross slide have power feed capability when the carriage is engaged with the feed rod.\u003c\/p\u003e\u003cp\u003eThe headstock is equipped with a pressurized oiling system that lubricates the bearings and gears before the spindle starts.\u003c\/p\u003e\u003cp\u003eThe bed of the lathe is constructed with Meehanite® castings that are hardened and precision-ground in the traditional three V-way prismatic design.\u003c\/p\u003e\u003cp\u003eQuality Allen-Bradley® electrical components and attention to detail provide dependable electrical control of the powered movements.\u003c\/p\u003e\u003cp\u003eAnd finally, this lathe comes with a circulating coolant system.\u003c\/p\u003e\u003cp\u003eThe SB1060PF manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to maintain your lathe.\u003c\/p\u003e\u003cp\u003eThe SB1060PF comes with a 2-year warranty which covers parts and assures the unit is free from factory defects.\u003c\/p\u003e\u003cp\u003eParts for the lathe may be available online and shipped from the South Bend parts warehouse in Springfield, MO.\u003c\/p\u003e\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSpindle motor: 12-1\/2 HP, 440V, 3-phase, 18A\u003c\/li\u003e\n\u003cli\u003eCoolant pump motor: 1\/8 HP, 440V\u003c\/li\u003e\n\u003cli\u003eOil pump motor: 1\/4 HP, 440V\u003c\/li\u003e\n\u003cli\u003eDistance between centers: 60\"\u003c\/li\u003e\n\u003cli\u003eSwing over bed: 18\"\u003c\/li\u003e\n\u003cli\u003eSwing over cross slide: 11.02\"\u003c\/li\u003e\n\u003cli\u003eWidth of bed: 13.58\"\u003c\/li\u003e\n\u003cli\u003eCross slide travel: 11\"\u003c\/li\u003e\n\u003cli\u003eCompound slide travel: 5.39\"\u003c\/li\u003e\n\u003cli\u003eSpindle nose: D1-8 camlock\u003c\/li\u003e\n\u003cli\u003eSpindle taper: MT #7\u003c\/li\u003e\n\u003cli\u003eSpindle speeds: Variable, 18–1800 RPM\u003c\/li\u003e\n\u003cli\u003eTailstock taper: MT #5\u003c\/li\u003e\n\u003cli\u003eTailstock travel: 6-1\/2\"\u003c\/li\u003e\n\u003cli\u003eInch thread range: 2–72 TPI (38 pitches)\u003c\/li\u003e\n\u003cli\u003eMetric thread range: 0.4–14 mm (40 pitches)\u003c\/li\u003e\n\u003cli\u003eModular threads: 0.3–3.5 (18 pitches)\u003c\/li\u003e\n\u003cli\u003eDiametral threads: 8–44 (21 pitches)\u003c\/li\u003e\n\u003cli\u003eLongitudinal feeds: 0.0015–0.0400 IPR (15)\u003c\/li\u003e\n\u003cli\u003eCross feeds: 0.001–0.034 IPR (15)\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 110-1\/2\" W x 27\" D x 62-1\/4\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 5408 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFEATURES\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFagor 2-axis DRO\u003c\/li\u003e\n\u003cli\u003eMeehanite® castings\u003c\/li\u003e\n\u003cli\u003eAllen-Bradley® controls\u003c\/li\u003e\n\u003cli\u003eSKF spindle bearings\u003c\/li\u003e\n\u003cli\u003eHalogen work light\u003c\/li\u003e\n\u003cli\u003e4-Way tool post\u003c\/li\u003e\n\u003cli\u003eComplete coolant system\u003c\/li\u003e\n\u003cli\u003e12\" 3-Jaw scroll chuck\u003c\/li\u003e\n\u003cli\u003e14\" 4-Jaw independent chuck D1-8\u003c\/li\u003e\n\u003cli\u003eU.S.-based customer service and technical support\u003c\/li\u003e\n\u003cli\u003eDue to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"South Bend","offers":[{"title":"Default Title","offer_id":45771291820223,"sku":"SB1060PF","price":48699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/sb1060pf-531a19888332ee239604142347c1349e.jpg?v=1782348164"},{"product_id":"24-7-1-2-hp-industrial-duty-resaw-bandsaw","title":"24\" 7-1\/2 HP Industrial-Duty Resaw Bandsaw","description":"\u003cp\u003eSB1123 24\" Industrial-Duty 7-1\/2 HP Resaw Bandsaw\u003c\/p\u003e\u003cp\u003ePrecision, power, and capacity for high-output, industrial use.\u003c\/p\u003e\u003cp\u003eThe professional-level, high-production SB1123 24\" Industrial-Duty 7-1\/2 HP Resaw Bandsaw from South Bend is a top-end powerhouse with its massive 24-3\/8\" throat and 16-1\/8\" resaw capacity, powered by a 7-1\/2 HP motor.\u003c\/p\u003e\u003cp\u003eIt’s the largest capacity, most impressive wood-cutting bandsaw South Bend offers–built to meet the demanding needs for industrial production work.\u003c\/p\u003e\u003cp\u003eDual ball-bearing blade guides and rack-and-pinion table adjustments provide precision and ease of use.\u003c\/p\u003e\u003cp\u003eThe computer-balanced cast-iron wheels, an extra-large 23-5\/8\" by 33-1\/2\" x 2\" thick precision-ground cast-iron table, and cast-iron trunnions all work together to minimize vibration.\u003c\/p\u003e\u003cp\u003eThe table tilting mechanism is the strongest in the industry, allowing you to put the heaviest loads on the table without losing squareness. This saw is a true joy to use!\u003c\/p\u003e\u003cp\u003eFor a full range replacement and resaw blades for the SB1123, shop here.\u003c\/p\u003e\u003cp\u003eIf unstoppable power and large capacity are a must for your production shop, there is simply not a better saw on the market to meet your demands.\u003c\/p\u003e\u003cp\u003eThe SB1123 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your bandsaw.\u003c\/p\u003e\u003cp\u003eMade in an ISO 9001 factory\u003c\/p\u003e\u003cp\u003e*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee. Please contact South Bend Technical Support at 360-734-1540 before placing your order.\u003c\/p\u003e\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMotor: 7-1\/2 HP, 220V\/440V* (prewired 240V), 3-phase, 20A\/10A\u003c\/li\u003e\n\u003cli\u003eMinimum circuit size: 30A @ 220V, 15A @ 440V\u003c\/li\u003e\n\u003cli\u003eThroat (max. width left of blade): 24-3\/8\"\u003c\/li\u003e\n\u003cli\u003eResaw capacity: 16\"\u003c\/li\u003e\n\u003cli\u003eTable size: 23-5\/8\" x 33-1\/2\"\u003c\/li\u003e\n\u003cli\u003eTable tilt: -5° L–45° R\u003c\/li\u003e\n\u003cli\u003eFloor-to-table height: 34-1\/2\"\u003c\/li\u003e\n\u003cli\u003eBlade size: 180\" (1\/4\"–1-1\/2\" wide)\u003c\/li\u003e\n\u003cli\u003eBlade speed: 5100 FPM\u003c\/li\u003e\n\u003cli\u003eFootprint: 41-1\/2\" x 23-1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 48\" W x 32\" D x 83-1\/2\" H\u003c\/li\u003e\n\u003cli\u003eApproximate shipping weight: 948 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFEATURES\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRack-and-pinion table tilt mechanism maintains table squareness while supporting the heaviest loads\u003c\/li\u003e\n\u003cli\u003ePrecision-ground cast-iron table with cast-iron trunnion\u003c\/li\u003e\n\u003cli\u003eComputer-balanced cast-iron wheels\u003c\/li\u003e\n\u003cli\u003eFoot-operated brake system\u003c\/li\u003e\n\u003cli\u003eQuick-change blade release\/tensioner\u003c\/li\u003e\n\u003cli\u003eDual ball-bearing blade guides\u003c\/li\u003e\n\u003cli\u003e2-year limited warranty\u003c\/li\u003e\n\u003cli\u003eNeed help?We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"South Bend","offers":[{"title":"Default Title","offer_id":45771294310591,"sku":"SB1123","price":5599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/sb1123-f9e4eb187a2d1f25878a9da6220a0528.jpg?v=1782348417"}],"url":"https:\/\/pittsburghsprayequip.com\/collections\/voltage-440\/hp-3.oembed","provider":"Pittsburgh Spray","version":"1.0","type":"link"}