{"product_id":"apex-48-inch-lightweight-foam-four-post-ramp-kit-set-of-2-5174172","title":"APEX 48-inch Lightweight Foam Four-Post Ramp Kit - Set of 2 (5174172)","description":"\u003ch3\u003eLightweight Foam Four-Post Lift Ramps for BendPak HD-9 and HD-7 Lifts\u003c\/h3\u003e\n\u003cp\u003eFactory four-post lift ramps get the job done, but they are often heavy, awkward, and steep enough to make loading lower vehicles more stressful than it needs to be. The APEX 48” Lightweight Foam 4 Post Ramp Kit replaces stock steel or aluminum ramps on compatible BendPak HD-9 and HD-7 series lifts with a lighter, easier-handling hook-nose ramp built for daily garage and shop use.\u003c\/p\u003e\n\u003cp\u003eEach ramp locks into the lift like the original drive-up ramps, but the experience is completely different. With a 48” length, 5” lift height, and smooth 5.7-degree approach angle, these lightweight four-post lift ramps help make vehicle loading faster, easier, and more controlled. One person can remove, carry, hang, and reinstall the ramps without turning every lift setup into a shoulder workout.\u003c\/p\u003e\n\u003ch3\u003eDesigned Specifically for BendPak HD-9 and HD-7 Four-Post Lifts\u003c\/h3\u003e\n\u003cp\u003eThe APEX 48” Foam 4 Post Ramp Kit is engineered for BendPak HD-9 and HD-7 series four-post lifts that use removable drive-up ramps. The hook-nose geometry, ramp profile, and pocket engagement are matched to the ramp receivers on these BendPak lift models for a secure, repeatable fit during vehicle loading and unloading.\u003c\/p\u003e\n\u003cp\u003eThis kit is not intended or approved for use on other lift brands or lift models, even if the ramp pockets appear similar. Before installation, always confirm that your lift is part of the BendPak HD-9 or HD-7 family and that the correct ramp receivers are installed. When matched properly, APEX ramps provide a purpose-built upgrade for HD-9 and HD-7 owners who want easier handling, cleaner loading, and a better everyday lift experience.\u003c\/p\u003e\n\u003ch3\u003eLow 5.7-Degree Approach Angle for Faster, Cleaner Loading\u003c\/h3\u003e\n\u003cp\u003eNot every shop or garage needs a long 96” ramp. The 48” APEX ramp kit is built for users who want a compact footprint, faster loading, and a friendlier approach angle than many factory steel ramps. At 48” long with 5” of lift, these ramps hit a practical sweet spot for standard ride height vehicles, performance cars, and many mildly lowered vehicles that see regular lift use.\u003c\/p\u003e\n\u003cp\u003eThe 5.7-degree approach angle helps reduce drama with front lips, splitters, long overhangs, and low-clearance bodywork. For general service, oil changes, inspections, detailing, storage, and everyday four-post lift use, these lightweight foam ramps make it easier to load vehicles smoothly without dragging out extra boards, blocks, or questionable garage science.\u003c\/p\u003e\n\u003ch3\u003eReinforced EPS Foam Core with Durable Polyurea Grip\u003c\/h3\u003e\n\u003cp\u003eAPEX ramps are built around a proprietary high-density expanded polystyrene structural foam core that is solid, lightweight, and designed to support serious vehicle weight without the bulk of steel. Unlike hollow plastic ramps, the dense EPS core does not collapse, echo, or feel unstable under the tire. It also resists rust, water absorption, oil absorption, and heat transfer while providing natural damping under load.\u003c\/p\u003e\n\u003cp\u003eEach ramp is fully encapsulated in a high-performance polyurea elastomer coating that bonds to the foam core and creates a tough, flexible outer shell. The micro-textured surface helps provide grip under the tire and at the floor interface, helping the ramp stay put during drive-on maneuvers on smooth concrete or epoxy-coated floors. Inside the hook nose, a precision-formed internal reinforcement with an S-shaped contour runs deep into the foam core, creating a mechanically anchored connection that acts like part of the ramp instead of a plate glued to the front.\u003c\/p\u003e\n\u003ch3\u003eBuilt for HD-9 and HD-7 Lifts\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for BendPak HD-9 and HD-7 series four-post lifts with removable drive-up ramps. The hook-nose profile matches compatible ramp receivers for a secure, repeatable fit.\u003c\/p\u003e\n\u003ch3\u003eLightweight Foam Construction\u003c\/h3\u003e\n\u003cp\u003eThe high-density EPS structural core keeps each ramp strong without the back-breaking weight of steel. One person can remove, carry, hang, and reinstall the ramps with ease.\u003c\/p\u003e\n\u003ch3\u003eLow 5.7-Degree Approach Angle\u003c\/h3\u003e\n\u003cp\u003eA smoother 5.7-degree approach helps make loading performance cars, mildly lowered vehicles, and long-overhang vehicles easier. Less scraping, less guessing, less garage gymnastics.\u003c\/p\u003e\n\u003ch3\u003eReinforced Hook-Nose Design\u003c\/h3\u003e\n\u003cp\u003eAn internal S-contour reinforcement runs deep into the foam core and is mechanically anchored before coating. The hook acts like part of the ramp, not an afterthought glued to the end.\u003c\/p\u003e\n\u003ch3\u003ePolyurea Grip Coating\u003c\/h3\u003e\n\u003cp\u003eThe ramp is encapsulated in a tough, flexible polyurea coating built to resist abrasion, impact, and common shop fluids. A micro-textured surface helps improve tire and floor grip during loading.\u003c\/p\u003e\n\u003ch3\u003eCompact 48-Inch Ramp Length\u003c\/h3\u003e\n\u003cp\u003eThe 48” length is ideal for users who want faster loading and easier storage without jumping to oversized ramp setups. It is a practical upgrade for service work, detailing, inspections, and daily lift use.\u003c\/p\u003e\n\u003ch3\u003eRecommended Add-ons\u003c\/h3\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces heavy steel or aluminum ramps on BendPak HD-9 and HD-7 four post lifts with a structural foam and polyurea design that one person can easily move.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically to fit the ramp pockets on BendPak HD-9 and HD-7 series lifts for a positive, repeatable hook nose engagement.\u003c\/li\u003e\n\u003cli\u003e48 inch length, 5 inch lift, and a 5.7 degree approach angle that is much friendlier to low and performance cars than most factory ramps.\u003c\/li\u003e\n\u003cli\u003eInternal S shaped reinforcement anchors deep into the core, so the hook acts as part of the ramp instead of a glued on afterthought.\u003c\/li\u003e\n\u003cli\u003eSolid, closed cell EPS supports thousands of pounds, will not rust, and does not absorb water, oil, or most common shop chemicals.\u003c\/li\u003e\n\u003cli\u003eChemically bonded shell that resists abrasion and chemicals while providing a micro textured surface for tire and floor grip.\u003c\/li\u003e\n\u003cli\u003eMolded hand areas and balanced weight make it easy for techs or owners to move, hang, and store ramps quickly.\u003c\/li\u003e\n\u003cli\u003eGentle on epoxy, sealed concrete, and painted floors with no sharp metal edges to gouge or stain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003eSet of 2 hook nose four post lift ramps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eDrive-on ramps for four-post vehicle lifts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eBendPak four-post lifts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Capacity Per Ramp\u003c\/td\u003e\n\u003ctd\u003e1750 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Capacity Per Pair\u003c\/td\u003e\n\u003ctd\u003e3500 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndividual Item Weight\u003c\/td\u003e\n\u003ctd\u003e11 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e48 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e19 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHook Nose\u003c\/td\u003e\n\u003ctd\u003e14 x 3.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproach Angle\u003c\/td\u003e\n\u003ctd\u003e5.7 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore Material\u003c\/td\u003e\n\u003ctd\u003eHigh density expanded polystyrene (EPS) structural foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating Material\u003c\/td\u003e\n\u003ctd\u003eTextured polyurea elastomer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHook Style\u003c\/td\u003e\n\u003ctd\u003eReinforced hook nose for drop-in four-post lift ramp pockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e21 x 50 x 7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e22 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Method\u003c\/td\u003e\n\u003ctd\u003eParcel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eManuals \u0026amp; Downloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/assets.bendpak.com\/APEX-Lightweight-Foam-Hook-Nose-4-Post-Lift-Ramps-Sales-Sheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAPEX Lightweight Foam Hook Nose 4 Post Lift Ramps Sales Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/assets.bendpak.com\/APEX-Hook-Nose-Four-Post-Lift-Ramps-Quick-Start-Guide.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAPEX Hook Nose Four Post Lift Ramps Quick Start Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/assets.bendpak.com\/APEX-Limited-Warranty-All-Products.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAPEX Limited Warranty All Products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APEX","offers":[{"title":"Default Title","offer_id":67714234712255,"sku":"5174172","price":356.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/apex-48in-lower-hook-nose-lift-ramps-5174172.jpg?v=1792578438","url":"https:\/\/pittsburghsprayequip.com\/products\/apex-48-inch-lightweight-foam-four-post-ramp-kit-set-of-2-5174172","provider":"Pittsburgh Spray","version":"1.0","type":"link"}