{"product_id":"apex-96-inch-lightweight-foam-four-post-ramp-kit-set-of-2-5174170","title":"APEX 96-inch Lightweight Foam Four-Post Ramp Kit - Set of 2 (5174170)","description":"\u003ch3\u003e96-Inch Lightweight Foam Four-Post Ramp Kit for BendPak HD-973P and HD-973PX Lifts\u003c\/h3\u003e\n\u003cp\u003eThe APEX 96-Inch Lightweight Foam 4-Post Ramp Kit is built to replace the heavy factory steel or aluminum drive-on ramps used with BendPak HD-973P and HD-973PX triple-stack parking lifts. These lightweight four-post lift ramps give you the same essential drive-on functionality with a smoother loading experience, easier handling, and a much friendlier approach for low-clearance vehicles.\u003c\/p\u003e\n\u003cp\u003eEach ramp uses a long 96-inch profile, 11 inches of lift, and a smooth 6-degree approach angle to help reduce scraping, dragging, and loading stress for performance cars, lowered vehicles, long-wheelbase vehicles, and cars with front lips or splitters. Instead of wrestling with heavy ramps every time you need access or storage flexibility, APEX gives HD-973P and HD-973PX owners a lightweight hook-nose ramp solution that feels like a real upgrade every time you use the lift.\u003c\/p\u003e\n\u003ch3\u003eDesigned Specifically for BendPak HD-973P and HD-973PX Triple-Stack Parking Lifts\u003c\/h3\u003e\n\u003cp\u003eThese APEX four-post lift ramps are engineered exclusively for BendPak HD-973P and HD-973PX triple-stack parking lifts that use removable, drop-in steel drive-on ramps. The hook-nose geometry, ramp profile, and pocket engagement are matched to the dimensions of these specific BendPak lift models for a secure, repeatable fit.\u003c\/p\u003e\n\u003cp\u003eThis kit is not intended or approved for use on any other four-post lift, even if the ramp pockets appear similar. Always verify that your lift is a BendPak HD-973P or HD-973PX before installation. Using these ramps on other brands or models can result in improper engagement, unstable ramp positioning, and unsafe operation. When matched correctly, APEX ramps create a cleaner, easier, and more confidence-inspiring loading experience for compatible BendPak triple-stack lifts.\u003c\/p\u003e\n\u003ch3\u003e6-Degree Approach Angle for Low Cars and Longer Wheelbase Vehicles\u003c\/h3\u003e\n\u003cp\u003eAt 96 inches long with 11 inches of lift, each APEX ramp provides a gradual run-up that helps low cars climb onto the lift with less drama. The 6-degree approach angle softens the transition from the shop floor to the lift runways, helping protect front splitters, lower lips, long overhangs, and performance bodywork during loading and unloading.\u003c\/p\u003e\n\u003cp\u003eThe longer ramp length is especially useful for modern performance cars, longer wheelbase vehicles, and cars with larger front overhangs. Instead of forcing the nose toward a steep ramp edge, the chassis rotates more gradually and predictably as the tires move up the ramp and onto the runways. For shops, detailers, dealers, and serious home garages, that means faster loading, fewer clearance headaches, and fewer “everybody hold your breath” moments.\u003c\/p\u003e\n\u003ch3\u003eReinforced EPS Foam Core with Rugged Polyurea Grip Coating\u003c\/h3\u003e\n\u003cp\u003eAPEX ramps are built around a proprietary high-density expanded polystyrene structural foam core that supports serious vehicle weight while staying impressively light in the hand. This is not hollow plastic, a thin metal shell, or a gimmick dressed up as shop equipment. The solid closed-cell EPS body distributes load through the full ramp structure, resists water and oil absorption, will not rust, and does not transfer heat like steel.\u003c\/p\u003e\n\u003cp\u003eEach ramp is fully encapsulated in a high-performance polyurea elastomer coating that chemically bonds to the foam core for a tough, flexible outer shell. The micro-textured surface helps grip the tire and the shop floor on concrete, epoxy, painted floors, and typical service bay surfaces. Inside the hook nose, a reinforced insert anchors deep into the structural foam body, creating a secure mechanical connection that seats into the lift slot without relying on a glued-on plate or thin coating layer to stay together.\u003c\/p\u003e\n\u003ch3\u003eBuilt for HD-973P and HD-973PX\u003c\/h3\u003e\n\u003cp\u003eEngineered exclusively for BendPak HD-973P and HD-973PX triple-stack parking lifts. The hook-nose profile and pocket engagement are matched to these specific lift models for proper fitment.\u003c\/p\u003e\n\u003ch3\u003e96-Inch Ramp Length\u003c\/h3\u003e\n\u003cp\u003eThe long 96-inch ramp profile creates a gradual run-up for low-clearance vehicles, performance cars, and longer wheelbase vehicles. It helps make loading smoother and more predictable from floor to runway.\u003c\/p\u003e\n\u003ch3\u003eSmooth 6-Degree Approach\u003c\/h3\u003e\n\u003cp\u003eA 6-degree approach angle helps reduce scraping on front lips, splitters, and long overhangs. It gives low cars a calmer path onto the lift without the sketchy stock-ramp routine.\u003c\/p\u003e\n\u003ch3\u003eReinforced Hook-Nose Insert\u003c\/h3\u003e\n\u003cp\u003eA contoured internal hook-nose insert anchors deep into the structural foam body. This creates a stronger connection than foam ramps that rely on a flat plate glued to the front.\u003c\/p\u003e\n\u003ch3\u003eStructural EPS Foam Core\u003c\/h3\u003e\n\u003cp\u003eThe high-density EPS core is solid, closed-cell, and engineered to support heavy vehicle loads while staying easy to carry. It will not rust, absorb oil or water, or feel hollow under the tire.\u003c\/p\u003e\n\u003ch3\u003ePolyurea Grip Coating\u003c\/h3\u003e\n\u003cp\u003eA rugged polyurea elastomer coating fully encapsulates the ramp for abrasion, impact, and chemical resistance. The micro-textured surface helps grip both the tire and shop floor during drive-on loading.\u003c\/p\u003e\n\u003ch3\u003eRecommended Add-ons\u003c\/h3\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDramatically lighter than the factory steel ramps supplied with BendPak HD-973P and HD-973PX lifts, while still providing serious strength.\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for BendPak HD-973P and HD-973PX four-post lifts and not designed or approved for use with other lift models or brands.\u003c\/li\u003e\n\u003cli\u003e96 inch length, 11 inch lift, and 6 degree approach angle help protect splitters, lips, and front overhangs when driving onto the lift.\u003c\/li\u003e\n\u003cli\u003eInternal hook reinforcement ties deep into the foam core for a strong, secure fit in the lift slot that will not rely on glue alone.\u003c\/li\u003e\n\u003cli\u003eSolid, closed cell EPS supports thousands of pounds while staying easy to carry, and will not rust, absorb water, or transfer heat.\u003c\/li\u003e\n\u003cli\u003eChemically bonded outer shell resists abrasion and chemicals and provides a grippy surface for both tires and shop floors.\u003c\/li\u003e\n\u003cli\u003eMolded hand grips and balanced weight make the ramps simple for one person to move, hang, and store.\u003c\/li\u003e\n\u003cli\u003eFoam and coating combination is safe on concrete, epoxy, and most painted or sealed surfaces without scratching or gouging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003eSet of 2 hook nose four post lift ramps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eDrive-on ramps for four-post vehicle lifts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eBendPak HD-973P and HD-973PX four-post parking lifts only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Capacity Per Ramp\u003c\/td\u003e\n\u003ctd\u003e1750 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Capacity Per Pair\u003c\/td\u003e\n\u003ctd\u003e3500 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndividual Item Weight\u003c\/td\u003e\n\u003ctd\u003e13.5 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e96 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e19 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e11 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHook Nose\u003c\/td\u003e\n\u003ctd\u003e14 x 3.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproach Angle\u003c\/td\u003e\n\u003ctd\u003e6 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore Material\u003c\/td\u003e\n\u003ctd\u003eHigh density expanded polystyrene (EPS) structural foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating Material\u003c\/td\u003e\n\u003ctd\u003eTextured polyurea elastomer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHook Style\u003c\/td\u003e\n\u003ctd\u003eReinforced hook nose for drop-in four-post lift ramp pockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e33 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Method\u003c\/td\u003e\n\u003ctd\u003eParcel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eManuals \u0026amp; Downloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/assets.bendpak.com\/APEX-Lightweight-Foam-Hook-Nose-4-Post-Lift-Ramps-Sales-Sheet.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAPEX Lightweight Foam Hook Nose 4 Post Lift Ramps Sales Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/assets.bendpak.com\/APEX-Hook-Nose-Four-Post-Lift-Ramps-Quick-Start-Guide.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAPEX Hook Nose Four Post Lift Ramps Quick Start Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/assets.bendpak.com\/APEX-Limited-Warranty-All-Products.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAPEX Limited Warranty All Products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APEX","offers":[{"title":"Default Title","offer_id":67714234679487,"sku":"5174170","price":1375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/apex-96in-upper-lift-ramps-hd-973-5174170.jpg?v=1792578435","url":"https:\/\/pittsburghsprayequip.com\/products\/apex-96-inch-lightweight-foam-four-post-ramp-kit-set-of-2-5174170","provider":"Pittsburgh Spray","version":"1.0","type":"link"}