Clemco Pulsar III-P Standard Pressure Sandblast Cabinet

• 1-cu-ft blast machine (with automatic refill from reclaimer) holds enough media to blast continuously for up to 30 minutes.
• ASME-code blast machine rated for 125 psi with large hand hole for internal maintenance and 35-degree conical bottom for smooth media flow.
• Standard Number 3 tungsten carbide nozzle delivers hundreds of hours of efficient blasting with most abrasives. Pulsar® pressure cabinets accepts nozzles up to Number 5.
• Efficient 1-inch air filter delivers high-volume air and traps oil and water that can ruin blast media and contaminate cleaned parts.

FAST CLEANING
The Pulsar® pressure cabinets incorporate a 1 cubic foot capacity blast machine in place of the suction blast system.

Pressure blasting cleans at rates three to four times faster than suction blasting and results in a better profile for bonding coatings or for stress relief on metals.

CONVERTIBLE
Pulsar® cabinets are built with flexibility in mind. When your production needs change,
your Pulsar® VI-P can be converted from pressure blast to suction blast.

Complete System

Actual space requirements depend on desired work flow. Allow additional work space for operator and maintenance.

A. 71” (1803 mm)
B. 52” (1321 mm)
C. 84” (2134 mm)

Cabinet: Door Opening

A. 36.5” (927 mm)
B. 38” (965 mm)
C. 19.5” (495 mm)
D. 20.5” (521 mm)
E. 27” (686 mm)

Dust Collector
Reverse-pulse cartridge dust collectors (which trap 99.7% of dust down to 0.5 micron) allow non-stop, high-production blasting. The polyester-cellulose cartridges are pulse cleaned each time the foot pedal is pressed and released for maximum filter efficiency. A dust collector auto-pulse kit is available as an option. Worn cartridges can be replaced in minutes.