Product Details:
Fits all SDS-plus and Hilti TE-C rotary hammers
Reduced area above the flute prevents the drill bit from binding while drilling--the full usable length can be utilized
Chrome vanadium shaft through-hardened to 50-53HrC
Patented tip and flute design removes dust more efficiently, up to 25% faster than other bits
Shot-peened, double-tempered finish reduces breakage
Hot isostatically pressed to extend life and resist breakage
Copper braze material gives high heat resistance for reduced tip loss
All tips made to ANSI specifications.
|
Irwin® SDS-plus Standard Tips Product Details: Fits all SDS-plus and Hilti TE-C rotary hammers Reduced area above the flute prevents the drill bit from binding while drilling--the full usable length can be utilized Chrome vanadium shaft through-hardened to 50-53HrC Patented tip and flute design removes dust more efficiently, up to 25% faster than other bits Shot-peened, double-tempered finish reduces breakage Hot isostatically pressed to extend life and resist breakage Copper braze material gives high heat resistance for reduced tip loss All tips made to ANSI specifications. | ||||||||||||||
 WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. | ||||||||||||||
| Specifications | ||||||||||||||
| Big Catalog Page# | 2012:2471 | |||||||||||||
| Bit Length | 8 in | |||||||||||||
| Brand | Irwin | |||||||||||||
| Country of Origin | CN | |||||||||||||
| Cutting Diam [Nom] | 3/8 in | |||||||||||||
| Dia. [Nom] | 3/8 in | |||||||||||||
| Finish | Chrome | |||||||||||||
| Flute Length | 8 in | |||||||||||||
| Hazmat | NO | |||||||||||||
| Height [Nom] | 3/4 in | |||||||||||||
| Length [Nom] | 13 3/4 in | |||||||||||||
| MPI Catalog | NO | |||||||||||||
| Overall Length [Nom] | 10 in | |||||||||||||
| Prop 65 | YES | |||||||||||||
| Stock Status | In Stock | |||||||||||||
| Type | Drill Bit | |||||||||||||
| UNSPSC | 27112700 | |||||||||||||
| Width [Nom] | 1 1/2 in | |||||||||||||
| NOTE: Country of Origin information is based on information provided by product manufacturers and other third parties. ORS Nasco Inc. has not independently verified this information and does not warrant its accuracy. | ||||||||||||||
|
| ||||||||||||||
43167204147391
82843140131
82843172899
;