Spray performance will depend upon a number of factors: material thickness, air power, spray pattern selected, and material flow. Testing different variations of the control settings will help you achieve the desired results. See descriptions and suggested Power and Material Settings Guide below to help with your project.
X-Boost™ Power Dial
The X-Boost™ power dial adjusts the level of air pressure produced by the turbine and is factory-set at maximum out of the box.
• A high air power level will result in faster coverage and a smoother finish with thicker materials.
• Lowering the air power will result in larger drops of material being sprayed from the gun, and will create a slightly rougher finish.
Tip: The thicker the material you are spraying, the higher the turbine power you will need. Tip: For fine-finish work with thinner materials, you may want to decrease the air power. Spraying a thinner material at high air power will result in more overspray. Overspray is sprayed material that does not stick to the spray surface and bounces back.