PIRATE BRAND Model 0.5 Cu. Ft. 121-0510-A Portable Package "A" Blaster

The PIRATE Model 0.5 Cu. Ft. (50 Lb. Capacity) 121-0510-A Portable Blaster With Remote Control System & AMV Grit Valve Only Holds 1/2 Cubic Foot Of Abrasive Providing Approximately 15 Minutes Of Blasting At 80 PSI With A No. 3 (3/16-Inch) Nozzle. At Less Than 110 Lbs. This Unit Delivers High-Performance, Versatile Blast Cleaning System Removes Contamination, Corrosion, Mill Scale, And Coatings From Most Surfaces. Produces A Uniform Surface Texture, And Creates A Surface Profile To Increase Bonding For Coatings. This Unit Is Sold Usually As A Replacement For A Worn Out Vessel Since It Does Not Include Blast Hose Or Osha Supplied Air Respirator Package.

PIRATE Model 0.5 Cu. Ft. (50 Lb. Capacity) 121-0510-A Portable Blaster With Remote Control System & AMV Grit Valve Only Package "A" Includes:

* 0.5 CU. FT. (50 LB. CAPACITY) (14 LITERS)
---- 150 PSI VESSEL (10.3 BAR)
---- A.S.M.E. SECTION VIII DIVISION 1
---- CRN FOR ALL PROVINCES
* PRESSURE RELEASE SYSTEM
---- AUTOMATICALLY BLOWS DOWN THE VESSEL WHEN CONTROL HANDLE IS RELEASED
---- 1/2" INLET VALVE
---- 1/2" DIAPHRAGM OUTLET VALVE
* 1/2" GALVANIZED PIPING FOR CORROSION RESISTANCE
* HEAVY DUTY FULL PORT BALL VALVES
* EXTENDED LIFE SCHEDULE 80 HEAVY DUTY NIPPLE WITHSTANDS ABRASIVE WEAR FOR LONGER LIFE
* FLEX PUSHER LINES WITH M-FLARE FITTINGS
* AMV JR METERING VALVE
* WEIGHT: 109 LBS. (49.6 KG)
* MADE IN USA

Features

• Full Flow Stainless Steel Teflon-Sealed Ball Valves With Brass Body
• Semi-Elliptical Head For Larger Storage Of Abrasive
• Urethane-Coated Pop-Up Valve With External Sleeve For Long Wear Life & Fast Pressurization
• Large Inspection Door For Easy Access To Inside
• Heavy-Gauge Construction Pressure Vessel Fabricated For Rugged Field Service
• Built To ASME Standards
• Conical 35 Degree Bottom Ensures Total Use Of Abrasive & Uninterrupted Abrasive Flow
• 45 Degree Abrasive Flow Into Air Stream
• Heavy Duty Piping Assembled Tightly Against Tank Avoids Unnecessary Protrusions
• Flexible Pusher Line Guarantees Air Flow Without Pressure Loss
• Mounted On Two Heavy-Duty Rubber Wheels For Easy Portability
• Weight: 110 Lbs. (50 Kg,)

Requirements for Operation: (These items are required but not all are included with this equipment)

• Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle.
• Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
• OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized. (Included)
• NIOSH-approved, type CE, supplied-air respirator.
• Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
• Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
• Appropriate blast suit, work boots, hearing and eye protection.

Advantages

• One-man portable industrial-quality blast machines manufactured to ASME code.
• Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
• AMV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Options & Products Commonly Purchased With 121-0510-A

888-2124-00512PB-FI
MPV MINI FREE UPGRADE FOR C-SERIES 0.5/1.0 CU FT ABRASIVE BLAST MACHINES (FACTORY INSTALL - UPGRADES STANDARD AMV JR TO MPV MINI)

101-2970-FI
MOISTURE SEPARATOR KIT, 1/2", FOR 0.5 & 1.0 C-SERIES BLASTERS (FACTORY INSTALLED)

101-9020-FI
PRESSURE REGULATOR KIT, 1/2", FOR 0.5 & 1.0 C-SERIES BLASTERS (FACTORY INSTALLED)

103-3620
SCREEN, LOW PROFILE, 10" (1/4" MESH), POWDER COATED BLACK

103-1070
LID, 10" DIA, W/HANDLE, POWDER COATED BLACK