RANSBURG 81520-211069 ASSEMBLY, APPLICATOR WATERBASE 65KV
The Ransflex is an air atomizing applicator powered only by a pressurized air source. Pressurized air creates rotation of a turbine generator that powers a cascade.The cascade generates a high voltage DC charge to the electrode creating an electrostatic field between the atomizer and the target.
One of the many features of the Ransflex applicator system is that the electrical energy, which is available from the resistive charging electrode, is limited to the optimum level of safety and efficiency. The system isincapable of releasing sufficient electrical or thermal energy during normal operating conditions to cause ignition of specific hazardous materials in their most easily ignited concentrations in air.
As the applicator electrode approaches ground,applicator circuitry causes the high voltage to approach zero while the current approaches its maximum value.This performance is validated by independent test agencies that give ATEX EN 50050 approvals or FM7260 approvals.
This Ransflex model is designed specifically for directcharge water-base applications only. The waterborne fluid supply system must be isolated from ground to allow proper electrostatic charging of the fluid.
The water base materials must be classified as non-flammable spray material. This means the mixture with air cannot be ignited by an energy source less than 500 mJ.
Features
- Lightweight and easy to maneuver.
- Ergonomic handle design to reduce operator fatigue.
- Three phases of turbine protection:
- Divorced turbine air supply cartridge
- Sealed nozzle/Atomization passages
- Strategic turbine location - DeVilbiss spray technology integration into atomization.
- Simultaneous fan/atom pressure adjustment with compensation valve.
| Designators | Dash no. | Includes |
| A | 2 | V SERIES 1.8mm (
80265-00,80264-18,79809-00 / YELLOW ) |
| B | 1 |
Adjustable Fluid (80775-00)
|
| C | 1 |
2-Finger Trigger (80211-00)
|
| 0 |
0 |
No Fluid Inlet Tube
|
| E | 6 |
|
| F | 8 |
QD AIR HOSE, 20m (80869-00, 80558-21) |
| Technical Specifications | |
| Atomization | V-Series 1.8mm |
| Fluid Control | Adjustable |
| Trigger Style | 2-Finger |
| Fluid Tube | NO |
|
Fluid Hose |
|
| Air Hose | 20m Quick-Disconnect(QD) |
| Environmental/Physical | |
| Applicator Length: | 273mm (10.75 inches) |
| Weight: (Without Hose) | 620 grams (22 oz.) |
| Hose 80558-XX Lengths (Std): | 5m, 10m, 15m and 20m |
| Electrical | |
| Operating Voltage: | 65kV DC (-) maximum |
| Current Output: | 120 microamperes maximum |
| Paint Resistance: |
Water base paint only * Use Model No. 76652, Test Equipment
|
| Part Sprayability: |
Determine sprayability of part to be coated using 76652, Test Equipment
|
| Mechanical | |
| Fluid Flow Capacity: |
1000 ml/minute** This reflects the maximum fluid volume the applicator can deliver. The maximum spray volume that can be effectivelatomized depends on fluid rheology, spray technology, and finish quality required.
|
| Wetted Parts: |
Stainless, polyethylene, nylon, acetal polymer
|
| Operating Pressure (Air Spray) | |
| Fluid: | (0-6.9 bar) 0-100 psi |
| Air: | (0-6.9 bar) 0-100 psi |
| Ambient Temp.: | 40°C to 5°C (104°F to 32°F) |
| Consumption (With Voltage): |
438 SLPM (15.4 SCFM) @ 2.8 bar (40 psig) @ Handle Inlet
|
| Sound Level: |
92dB (A) @ 2.8 bar (40 psig) Inlet, 1m from applicator
|