G4015Z 3/4 HP Combo Lathe/Mill

This lathe/mill combo is not your basic benchtop machine!

The G4015Z is a precision metalworking lathe/mill. The lathe features a 16-1/2" swing, 19-3/16" between centers, and 6 speeds ranging from 185 to 1455 R.P.M.

The lathe cuts inch and metric threads, features 9 longitudinal feeds, and comes with a 4" three-jaw scroll chuck and 9-1/2" faceplate.

The compound rest features a built-in vise and the cross slide conveniently doubles as a mill table.

Meanwhile, the milling portion of the machine features a swing of 12", 14 speeds ranging from 117 to 1300 RPM, and a vise with a 2-3/4" capacity.

It sports an adjustable head, coarse and fine downfeed controls, and comes with a 1/2" drill chuck with arbor.

With the G4015Z, you get a lot of machine in a small package with all the features you need for just about any job!

Like all Grizzly machines, the G4015Z comes with a 1-year limited warranty.

The G4015Z manual was written by our U.S. based Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your combination lathe mill.

The Grizzly Technical Support team is also U.S.-based. Parts for the machine may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

LATHE SPECIFICATIONS:

• Swing over bed: 16-1/2"
• Swing over saddle: 11-1/2"
• Distance between centers: 19-3/16"
• Bed width: 5-1/2"
• Spindle speeds: 7, 185–1455 RPM
• Spindle bore: 0.787"; 20mm
• Spindle taper: MT#3
• Tailstock taper: MT#3
• Tailstock quill travel: 1-1/2"
• Cross slide travel: 4-1/2"
• Compound travel: 3"
• Maximum tool bit size: 1/2"
• Leadscrew: 7/8"x 6 TPI
• Longitudinal feeds: 8, 0.0020–0.0069 in/rev
• Inch thread range: 27, 8–120 TPI
• Metric thread range: 18, 0.2–3.0mm

MILL SPECIFICATIONS:

• Swing: 12"
• Distance from spindle to table: 10"
• Distance from spindle to bed: 15-3/4"
• Spindle speeds: 14, 117–1300 RPM
• Spindle taper: MT#3
• Spindle travel: 3-1/2"
• Head vertical travel: 3"
• Table dimensions: 6" W x 7-1/4" L x 1-1/2" H
• T-slots: two at 7/16", 3.54" (90mm) on center
• Maximum tool bit size: 1/2"
• Drilling capacity: 1/2" (steel)

MAIN SPECIFICATIONS:

• Motor: 3/4 HP, 110V, single-phase 8.7A
• Dimensions: 42" W x 23" D x 35" H
• Approximate shipping weight: 475 lbs.

FEATURES:

• Cross slide doubles as a mill table
• Coarse and fine mill spindle downfeed
• Adjustable milling head
• Built-in vise on compound rest
• Cuts inch and metric threads

INCLUDES:

• 1/2" Drill chuck with arbor
• Two dead centers
• 4" Three-jaw scroll chuck
• 4-Way tool post
• 9-1/2" Faceplate
• 5" Backplate
• MT#3 chuck arbor