TITAN AIRLESS SPRAY TIPS

TR1 HEA TIPS

REVOLUTIONARY LOW PRESSURE TECHNOLOGY

The revolutionary spray technology of Titan's line of tips puts paint where it belongs while decreasing overspray and extending the life of the pump.

• Optimized to spray all architectural paints and coatings at 1,000 psi at production speed
• Decreases overspray up to 55% allowing contractors to spray more
• Maximum Working Pressure: 5000 PSI (53.1 MPa)

TR1 REVERSIBLE TIP

THE BEST OVERALL PERFORMING TIP IN THE INDUSTRY

Long-lasting orifice gives you more usable tip life, spraying a consistent film thickness and wasting less paint.

• The best overall performing tip in the industry
• Fits all Titan and most other industry spray gun guards
• Maximum Working Pressure: 5000 PSI (53.1 MPa)

SC-6+ REVERSIBLE TIP

SC-6+ REVERSIBLE HIGH QUALITY TIP

Titan's SC-6+ Reversible spray tips has a long-lasting orifice that provides you more usable tip life, spraying a consistent film thickness and wasting less paint. These spray tips come in the widest variety of sizes used to spray coatings such as latex paint in residential or commercial applications. 

• Up to 22% wider fan pattern
• Fits all Titan and most other industry spray gun guards
• Maximum Working Pressure: 5000 PSI (53.1 MPa)

SC-6+ FINE FINISH TIPS

SC-6+ SYNERGY FINE FINISH HIGH QUALITY TIPS

Titan's SC-6+ Synergy Fine Finish tips are made for finish work such as cabinetry, woodwork and metal. These tips were designed to be used with stains, lacquers, light-bodied clear finishes and other fine-finish materials.

• Particle size up to 27% smaller than a standard tip
• Interchangeable with the industry standard safety guards
• Pressure rated at 5000 PSI (34.5 MPa)

SC-6+ WIDESPRAY TIPS

TITAN SC-6+ REVERSIBLE HIGH QUALITY SPRAY TIP

• Up to 22% wider fan pattern
• The industry’s longest-lasting orifice
• Fits all Titan and most other industry spray gun guards
• Maximum Working Pressure: 5000 PSI (34.5 MPa)

TR1 HIGH PRESSURE TIPS

TITAN PREMIUM TR1 REVERSIBLE HIGH PRESSURE SPRAY TIP

• Maximum Working Pressure: 7700 PSI (53.1 MPa)
• The best overall performing tip in the industry
• An orifice that outlasts competitive tips delivering consistent film thickness and less wasted paint.

TR1 LINE STRIPING TIPS

ENGINEERED FOR PERFECT LINES

Titan’s TR1 line striping tips are built to provide the performance to exceed contractor expectations and increase profit.

• The Industry’s Best Performing Fan Pattern
• Sprays razor sharp lines
• Consistent line width from the first gallon to the last
• Longest Lasting Striping Tip in the Market
• Uniform film build for the life of the tip
• Less wasted paint equals more profit
• New Easy-to-Read Tip Sizes
• 421 = 4" stripe (6" from the surface) with a 0.021" orifice
• Maximum Working Pressure: 5000 PSI (34.5 MPa)

TR2 LINE STRIPING TIPS

GO FROM STRIPING TO STENCILING – WITH THE TWIST OF THE TIP.

• Switch to one side for your stenciling needs and back for striping with just a twist
• Consistent film thickness when using wide or narrow fan pattern
• Speed and control at you fingertips
• One tip with two fan patterns
• Maximum Working Pressure: 5000 PSI (34.5 MPa)

TR2 REVERSIBLE TIPS

ONE TIP WITH TWO FAN PATTERNS – IT’S SPEED AND CONTROL AT YOUR FINGERTIPS.

• Switch to wide or narrow fan pattern with a twist
• Consistent film thickness when using wide or narrow fan pattern
• Maximum Working Pressure: 5000 PSI (34.5 MPa)

FLAT TIPS

PRECISION MACHINED FROM THE HIGHEST QUALITY TUNGSTEN CARBIDE

• Precision machined from the highest quality Tungsten Carbide
• Solvent-proof seal holds up against the harshest coatings
• Pressure rated to 5000 PSI (34.5 MPa)

BRILLIANT FLAT TIPS

PRECISION MACHINED FROM THE HIGHEST QUALITY TUNGSTEN CARBIDE

• For use with the GM3600 Air Assisted Airless gun
• Designed for high production fine finish applications
• Maximum Working Pressure: 5000 PSI (34.5 MPa)