40,000 lbs. take a lot of muscle to lift, and many vehicles of this caliber are longer than our standard-length series of four-post lifts can accommodate. If you want to be prepared for the longest and heaviest vehicles on the road, you need BendPak's most impressive offering—and this is undoubtedly it. With runways that measure in at a whopping 310”, the HDS-40X is the heaviest-duty extended-length car lift we make. Slap a bus on it and get to work, no sweat.
The power of this lift is no light matter. Military contractors, government entities on all levels and large commercial truck repair companies have all sought this lift out, knowing there's nothing they can throw at it that it can't handle. Far from being a hobby lift, this industrial-grade powerhouse is only going to fit in serious-minded commercial maintenance spaces. You'll need a big bay with high ceilings, and if you have that, the HDS-40X doubles as a parking lift and ultra-safe storage space.
Super-long runways
Super-duty vehicles need a clean approach and a wide runway to safely board a lift. At 28" wide, these runways accommodate tires of virtually any diameter and width.
Dual-hub cable sheaves
BendPak cable sheaves are made to dominate every lifting application, however big or small. 12" diameter sheave bodies and 4" axles make them far more likely to last the lifespan of your lift because of their sheer size and quality of construction.
Large base plates
Truck lift base plates are made super-wide, which makes sense considering the size of the vehicles you're putting on the runways. 12 x 12 plate dimensions are extremely secure for maximum stability and lifting longevity.
Spring-loaded safety locks
13 lock positions offer up to 60" of rise for comfortable undercarriage access. All locks automatically engage during rise and disengage at the touch of a button. Just one look at the lock sizes will inspire confidence that this lift is safer than any you've ever seen.
Secondary lock system
The primary locks are more than enough security, but we don't leave a single, tiny thing to chance. So, we include a backup cable-slack detection system that captures loose cables immediately if slack develops. This system makes it entirely safe to remedy any issues without risking uneven platforms.
Rolling bridge jacks
Need to perform wheel service on your fleet? Of course you do. Pick up a pair of RBJ25000 bridge jacks and start working. Together, two jacks will lift a vehicle up to 50,000 lbs., but keep in mind the HDS-40X has a 40,000-lb. limit. The extra 10K is not just peace-of-mind, but a practical consideration since the front half of most trucks (where the engine and transmission rest) is likely to be heavier than the back.
SpecificationsHDS-40X
40,000-lb. lifting capacity
Supersized 12" diameter cable sheaves
Galvanized lifting cables
Extended length runways
Grease nipples
Single hydraulic under-runway cylinder
Integrated flow restrictor
Durable powder coat
Spring-loaded safety locks
Second lock system on constant guard
Fully enclosed lifting cables
Multiple adjustable height locking positions
Maintenance-free electric hydraulic power system
Conveniently positioned operator controls
12" x 12" base plates
Runways feature a durable matte finish
Optional rolling jacks
Capacity
Lifting Capacity*
40,000 lbs. (18,144 kg)
*Max Capacity / Front Axle
20,000 lbs. (9,072 kg)
*Max Capacity / Rear Axle
20,000 lbs. (9,072 kg)
Rise
A - Min. Runway Height:
9.5" (241 mm)
B - Max. Rise:
60" (1,524 mm)
C - Max. Lifting Height:
67" (1,702 mm)
Time to Full Rise:
75 seconds
Outside Dimensions
D - Overall Width:
153.5" (3,899 mm)
E - Outside Length:
317" (8,052 mm)
F - Overall Length:
373.75" (9,487 mm)
G - Height of Columns:
91.25" (2,318 mm)
Inside Dimensions
H - Width Between Columns:
133.5" (3,391 mm)
I - Drive-Thru Clearance:
109" (2,769 mm)
Runways
J - Runway Width:
28" (711 mm)
K - Length of Runways:
316" (8,026 mm)
L - Width Between Runways:
40.75" (1,038 mm)
M - Runway Centerline:
74" (1,880 mm)
N - Outside Edge of Runways:
102" (2,592 mm)
Minimum Wheelbase
Rated Capacity:
230" (5,842 mm)
75% Capacity:
195" (4,953 mm)
50% Capacity:
165" (4,191 mm)
25% Capacity:
130" (3,302 mm)
Locking
Locking Positions:
13
Lock Spacing:
Every 4" (100 mm)
Power Unit
Motor:
220 VAC / 60 Hz. 1Ph.
Noise:
45 dB
Shipping
Weight:
6,748-lbs. (3,060 kg)
Dimensions:
266'' x 33'' x 37'' (6,756 mm x 838 mm x 940 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to
disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or
ANSI/UL 201. Consult www.autolift.org for a complete list or
contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI
ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic
anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or
International Building Code (IBC).
choosing a selection results in a full page refresh
press the space key then arrow keys to make a selection
Join us and Save 5% on your first order
As a subscriber you will receive the following perks:
- Advanced notice of deals and promotions
- Helpful content on equipment use, selection, and more
- Exciting new product annoucements
How to get 5% off
Just enter your email and will send the coupon code to your email.
Apply that code to receive your discount*
* Promo only valid for first purchase, promo is non transferrable, promo doesn't apply to all items
Join us and Save 5% on your first order
As a subscriber you will receive the following perks:
- Advanced notice of deals and promotions
- Helpful content on equipment use, selection, and more
- Exciting new product annoucements
How to get 5% off
Just enter your email and will send the coupon code to your email.
Apply that code to receive your discount*
* Promo only valid for first purchase, promo is non transferrable, promo doesn't apply to all items
Join us and Save 5% on your first order
As a subscriber you will receive the following perks:
- Advanced notice of deals and promotions
- Helpful content on equipment use, selection, and more
- Exciting new product annoucements
How to get 5% off
Just enter your email and will send the coupon code to your email.
Apply that code to receive your discount*
* Promo only valid for first purchase, promo is non transferrable, promo doesn't apply to all items
Shipping and Returns
Shipping should be simple
We offer free shipping on orders over $80, less than $80 we charge a single flat rate fee of $8.50
Our primary carriers include UPS and USPS and for large items a variety of freight carriers.
Please note for certain product categories particularly filters there is at times an additional charge for shipping.
Shipping policy exceptions
Not all products qualify for free shipping.
No-Hassle Returns
Except as otherwise described below, if you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange (if the product is undamaged). When you make your return, you’ll need to note credit or exchange. Returned items must be in the original packaging. To initiate a return you can contact us via phone and we can coordinate the return with you.
If you have questions please contact us at 866 373 5658
Shipping and Returns
Shipping should be simple
We offer free shipping on orders over $80, less than $80 we charge a single flat rate fee of $8.50
Our primary carriers include UPS and USPS and for large items a variety of freight carriers.
Please note for certain product categories particularly filters there is at times an additional charge for shipping.
Shipping policy exceptions
Not all products qualify for free shipping.
No-Hassle Returns
Except as otherwise described below, if you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange (if the product is undamaged). When you make your return, you’ll need to note credit or exchange. Returned items must be in the original packaging. To initiate a return you can contact us via phone and we can coordinate the return with you.
If you have questions please contact us at 866 373 5658
Shipping and Returns
Shipping should be simple
We offer free shipping on orders over $80, less than $80 we charge a single flat rate fee of $8.50
Our primary carriers include UPS and USPS and for large items a variety of freight carriers.
Please note for certain product categories particularly filters there is at times an additional charge for shipping.
Shipping policy exceptions
Not all products qualify for free shipping.
No-Hassle Returns
Except as otherwise described below, if you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange (if the product is undamaged). When you make your return, you’ll need to note credit or exchange. Returned items must be in the original packaging. To initiate a return you can contact us via phone and we can coordinate the return with you.
