Feel free to call or chat with us for recommendations.
📦
Shipping times may vary contact us for more information
🚚
Free Shipping on orders $500 and up., some items have a optional lift gate for a additional fee
Flat rate of $12.50 for orders below $500.
Click here for more info.
Flat rate of $12.50 for orders below $500.
Click here for more info.
🔁
30-day returns. Click here for more info.
⚙ 8.0 cu. ft.
💨 150 PSI Max
🔒 Dual Chamber
🎛 Pneumatic Control
📍 Stationary
✓ 5-Year Complete Blast Pot Warranty | ✓ 10-Year Pressure Vessel Warranty
Features & Benefits
-
8.0 CU. FT. Capacity (225 Liters)
- Upper Chamber - 3.25 CU FT (2.69 Useable) Lower Chamber - 4.19 CU FT (4.04 Useable)
- 150 PSI Vessel (10.3 BAR)
- A.s.m.e. Section Viii Division 1
- CRN For All Provinces
-
Dual-chamber System
- Continuously Refills While Remaining Pressurized
- Increases Productivity By Eliminating The Need To Stop Blasting While Refilling
-
BIG GUN Full Flow Systems Provides
- A Zero Pressure Drop Path For Air & Abrasive To Travel To The Blast Nozzle. Every 1 PSI Gained Or Lost In Abrasive Blasting = 1.5% Production
- A Must For #7 & #8 Nozzles
- Full Port Coupling Blast Hose Connection Provides An Unrestricted Path For Air & Abrasive To Travel To The Nozzle
- Dual-chamber Cycle Controls Housed In A Nema 4 Rated Enclosure
-
Galvanized Piping For Corrosion Resistance
- 1-1/2" Piping
- 2" Inlet
- Heavy Duty Full Port Ball Valves
-
Extended Life Schedule 80 Heavy Duty Nipple
- Withstands Abrasive Wear For Longer Life
- Bolt Clamps On Pusher Line Make Field Repairs Easier
-
Combination Valve/apvii Valve
- Combination Valve Is A 2 In 1 Design That Is Responsible For Cycling The Top Chamber In Dual-chamber Systems
- Automatic Plunger Valve Ii (apvii) Premium Abrasive Metering Valve With Quadruple Plunger Seal Arrangement Solves The Air & Abrasive Carry Over Problem As Well As The Plunger & Seal Jamming Problem Normally Associated With Regulated Low Pressure Blasting Applications And Or The Use Of Steel Abrasive. Solid Machined Tungsten Carbide Plunger & Sleeve Provides Far Superior Wear Rates And 100% Consistent Tolerances. 1" NPT Cleanout Port Gives Access To Obstructions That May Be Bridging Over The Metering Port Also Allows You To Drain The Vessel Without Removing The Valve
- Relieving Control Handle Reduces Air Consumption And Reduces Stopping Times When Control Handle Is Released
- 15' Blowdown Hose Assembly For Remote Mounting
-
9" Adjustable Spider
- Fully Adjustable For Different Media Types & Sizes
- When Abrasive Is Hopper Feed From Above This Keeps The Weight Of The Abrasive Off The Pop-up Allowing It To Close & Seal Properly
-
Skirted Pop-up Gasket
- Skirted Pop-up Gasket By Design Will Knife Its Way Through The Abrasive To Assist In Sealing
- Helps With The Abrasive Burping Problem That Is Commonly Seen With Hopper Feed Blast Pots
- A Must When Using Large Grit Sizes
-
Union End Ball Valves
- Allows You To Shut Off The Abrasive At The Bottom Of The Pot For Maintenance/repairs And Remove The Abrasive Metering Valve Without Dumping The Entire Vessel Of Abrasive On The Floor N. Full Load Lifting Eyes
- Allow Lifting And Transportation Of Vessel For Placement Maintenance Or Repair