Feel free to call or chat with us for recommendations.
📦
Shipping times may vary contact us for more information
🚚
Free Shipping on orders $500 and up., some items have a optional lift gate for a additional fee
Flat rate of $12.50 for orders below $500.
Click here for more info.
Flat rate of $12.50 for orders below $500.
Click here for more info.
🔁
30-day returns. Click here for more info.
With the InvisiPac Hot Melt Adhesive Applicator, you’ll experience a new era in hassle-free operation with improved uptime. With its innovative free-flow manifold design and integrated applicator filtering – when used with the InvisiPac System – you can eliminate nozzle plugs. You’ll finally have a hot melt system that runs reliably, unnoticed and invisible.
Features
- Adhesive is processed in a better way The applicator's free-flow manifold design is engineered to eliminate dead zones where char will build upModule includes an integrated filter assembly near the ball and seat junction that eliminates nozzle pluggingAdhesive spends less time at high temperature, resulting in less charChanges in the heated hose construction significantly reduce the formation of char in the hose itselfLess char allows you to use lower cost adhesives and save money
- The applicator's free-flow manifold design is engineered to eliminate dead zones where char will build up
- Module includes an integrated filter assembly near the ball and seat junction that eliminates nozzle plugging
- Adhesive spends less time at high temperature, resulting in less char
- Changes in the heated hose construction significantly reduce the formation of char in the hose itself
- Less char allows you to use lower cost adhesives and save money
- Works with the InvisiPac Tank-Free Hot Melt Delivery System
- Quick start-up - ready in less than 10 minutes
- Tank-Free design means adhesive spends less time at high temperatures - significantly reducing char
- Less char results in less nozzle plugging, less system maintenance and more uptime
Specifications
| Ambient/Warm Melt/Hot Melt | Hot Melt |
| Application | Bonding, Sealing |
| Component Type | Single Component |
| For Use With | InvisiPac GM100 Plug-Free |
| Gun Activation | Automatic |
| Includes | Manual |
| Maximum Air Pressure (MPa) | 0.5 |
| Maximum Air Pressure (psi) | 80 |
| Maximum Fluid Pressure (MPa) | 10.3 |
| Maximum Fluid Pressure (psi) | 1500 |
| Meter Type | Time Pressure |
| Minimum Air Inlet Pressure (MPa) | 0.44 |
| Minimum Air Inlet Pressure (psi) | 65 |
| Model | InvisiPac |
| Number of Modules | 1 |
| Number of Outputs | 1 |
| RTD Type | Pt 100 (385 ohms) |
| Series | GM100 |
| Solenoid Valve Voltage Rating (V dc) | 24 |
| Type | Hot Melt Applicator |
| Wetted Parts | Aluminum, Brass, Carbide, Carbon Steel, Stainless Steel |
| Maximum Air Pressure (bar) | 5.5 |
| Maximum Air Pressure (kPa) | 550 |
| Maximum Air Pressure (kg/cm²) | 5.62 |
| Maximum Fluid Pressure (bar) | 103 |
| Maximum Fluid Pressure (kPa) | 10300 |
| Maximum Fluid Pressure (kg/cm²) | 105.46 |
| Minimum Air Inlet Pressure (bar) | 4.4 |
| Minimum Air Inlet Pressure (kPa) | 440 |
| Minimum Air Inlet Pressure (kg/cm²) | 4.57 |