Feel free to call or chat with us for recommendations.
Flat rate of $12.50 for orders below $500.
Click here for more info.
Compact Foam Garage Ramps That Make Quick Service Easier
The APEX 36-inch Lightweight Foam Garage Ramp Kit is the compact entry point in the APEX garage ramp lineup, giving home garages and small workspaces 4 inches of usable lift without taking over the floor. With a 36-inch length and a 9.35-degree approach angle, this set is built for quick service tasks, low-car access, and owners who need more clearance but do not have room for larger ramp kits.
For oil changes, exhaust checks, underbody inspections, detailing, and everyday garage work, the 36-inch kit gives you a cleaner alternative to flimsy ramps, improvised blocks, or dragging out a jack for every small job. Park, roll up, set the brake, and create enough working space to see and reach the areas that are usually buried just above the concrete.
4 Inches of Lift in a Space-Saving Footprint
The 36-inch ramp length makes this kit easy to live with in tight garages, shared spaces, and storage-limited shops. It is short enough to store against a wall or tuck into a corner, but still shaped to deliver 4 inches of stable lift with a low-car-aware approach.
The 9.35-degree angle gives the front end more time to climb than many generic short ramps, helping reduce scraping on sporty factory ride heights and lowered vehicles. It is the right size when you want a quick drive-on solution without committing to a longer ramp setup.
Solid Closed-Cell Core, Not Hollow Plastic
At the heart of each 36-inch APEX garage ramp is a high-density structural foam core that spreads load across the ramp profile. The solid closed-cell body feels stable under tire and resists permanent compression over time, helping the ramp maintain its height and shape through regular use.
That construction also keeps each ramp light enough to grab, position, and store without a fight. For owners who want a compact garage ramp they will actually use, the 36-inch kit brings meaningful lift without heavy steel or hollow plastic drama.
Textured Coating for Grip, Protection, and Floor Safety
APEX encapsulates the foam core in a rugged textured coating designed to handle normal garage abuse. It helps protect the ramp from abrasion, oil, chemicals, and everyday scuffs while adding grip for both tires and typical floor surfaces.
The non-metal construction is friendly to epoxy, coated concrete, and decorative floors because there is no steel body to rust or gouge the surface. Compact, light, and easy to store, the 36-inch APEX ramp kit is a smart choice for quick service access in garages where every inch matters.
Compact 36-Inch Length
Built for tight garages and small storage spaces. The shorter ramp is easy to place, remove, and store when floor space is limited.
4-Inch Lift Height
Adds enough clearance for oil changes, exhaust checks, inspections, and light underbody work without using a larger ramp kit.
9.35-Degree Approach
The low approach angle helps sporty cars and lowered vehicles climb with less scraping than many generic short ramps.
Solid Foam Construction
The high-density closed-cell core distributes weight through the ramp and resists permanent compression over regular use.
Grippy Textured Finish
The rugged coating helps the ramp grip tires and garage floors while protecting against scuffs, oil, and common chemicals.
Floor-Friendly Design
No metal body means no rust and less risk of scratching epoxy, coated concrete, or decorative garage flooring.
Features
- 36-inch lightweight foam garage ramp kit
- 4-inch vehicle lift height
- 9.35-degree approach angle
- Set of 2 garage ramps
- Compact size for tight garages and small shops
- Useful for oil changes, exhaust checks, inspections, and detailing
- Designed for sporty factory ride heights and lowered cars
- Solid high-density structural foam core
- Closed-cell construction helps resist permanent compression
- Textured coating helps grip tires and floors
- Helps protect against abrasion, oil, and common chemicals
- No metal body to rust or scratch finished floors
- Integrated molded carry zones
- Easy one-person positioning and storage
- Usage and safety guidelines included
Specifications
| Configuration | Set of 2 Garage Ramps |
| Intended Use | Drive-on lift for vehicle service and light work |
| Load Capacity Per Ramp | 1750 lb |
| Load Capacity Per Pair | 3500 lb |
| Individual Item Weight | 4.5 lb |
| Length | 36 in |
| Width | 14 in |
| Height | 6 in |
| Tire Rest Height | 4 in |
| Tire Rest Length | 11 in |
| Approach Angle | 9.35 degrees |
| Core Material | High density expanded polystyrene (EPS) structural foam |
| Coating Material | Textured polyurea elastomer |
| Shipping Weight | 11 lb |
| Shipping Method | Parcel |
Manuals & Downloads
- APEX Lightweight Foam Garage Ramps Sales Sheet
- APEX Garage Ramps Quick Start Guide
- APEX Limited Warranty All Products