Feel free to call or chat with us for recommendations.
Flat rate of $12.50 for orders below $500.
Click here for more info.
Foam Garage Ramps with Room to Work
The APEX 48-inch Lightweight Foam Garage Ramp Kit gives home garage owners a practical step up from cramped floor-level maintenance. With 6 inches of lift, a 48-inch run, and a 9.5-degree approach angle, this pair of garage ramps adds usable clearance for oil changes, inspections, underbody access, exhaust work, and routine service without requiring a permanent lift.
This size is the sweet spot for drivers who want more working height than a small ramp can provide while still keeping the kit easy to store, carry, and use. The 48-inch APEX ramp is especially useful for performance coupes, sporty sedans, and mildly lowered street cars that need a smoother approach than traditional plastic or metal ramps typically offer.
Six Inches of Lift Without the Sketchy Setup
Six inches may not sound dramatic until you are trying to reach a drain plug, remove an undertray, or inspect hardware with your shoulders pinned to the floor. The 48-inch ramp gives you real working room while keeping the overall footprint garage-friendly. You get better access without jumping straight to a long ramp that takes over the bay.
The 9.5-degree approach angle helps the vehicle climb gradually, reducing the harsh pivot that can scrape lips, splitters, and long front overhangs. For owners who avoided ramps because their car sat too low, this kit makes drive-on service feel far more realistic.
Solid EPS Structural Core for Stable Drive-On Support
At the center of each 48-inch APEX garage ramp is a solid high-density EPS structural foam core. It is not hollow plastic and it is not a flimsy shell. The core spreads vehicle load across the ramp body, helping the ramp feel planted under tire while resisting permanent compression over time.
That construction also keeps the ramp easy to handle. Each piece is light enough for one person to position, move, and store, so setup is simple enough that you are more likely to use the ramps instead of putting the job off.
Textured Surface for Tires, Floors, and Garage Life
APEX surrounds the foam core with a rugged textured coating that helps protect the ramp from abrasion, impacts, oil, and common garage chemicals. The micro-textured surface helps grip both the tire and the floor, so the ramps are designed to stay where you put them during drive-on use.
Because there is no metal body, the 48-inch kit will not rust or scratch epoxy, coated concrete, or decorative garage floors. It is a cleaner, quieter, easier-to-live-with garage ramp for people who work on their cars often and want the equipment to keep up.
Balanced 48-Inch Size
The 48-inch ramp length adds a more gradual climb without becoming a storage problem. It is a strong all-around choice for home garages and small shops.
6-Inch Lift Height
Adds meaningful working room for oil changes, inspections, undertrays, exhaust checks, and general underbody access.
Low-Car Friendly Angle
A 9.5-degree approach helps performance cars and mildly lowered vehicles climb with less scraping and less stress.
Solid Structural Foam
The high-density EPS core spreads load across the ramp body and resists permanent compression during normal use.
Garage Floor Safe
With no metal body, the ramps will not rust or gouge epoxy, coated concrete, or decorative garage floors.
Easy to Carry and Store
Lightweight construction and molded carry zones make each ramp easy to move, position, and store between jobs.
Features
- 48-inch lightweight foam garage ramp kit
- 6-inch vehicle lift height
- 9.5-degree approach angle
- Set of 2 garage ramps
- Designed for drive-on service work in home garages and small shops
- Useful for oil changes, inspections, exhaust work, and underbody access
- Ideal for performance cars and mildly lowered street setups
- Solid high-density EPS structural foam core
- Closed-cell construction distributes load under tire
- Resists permanent compression over time
- Textured coating helps grip tires and typical garage floors
- Helps protect against abrasion, impacts, oil, and common chemicals
- No metal to rust or scratch coated or decorative floors
- Integrated molded carry zones
- Usage and safety guidelines included
Specifications
| Configuration | Set of 2 Garage Ramps |
| Intended Use | Drive-on lift for car service and light repair work |
| Load Capacity Per Ramp | 1750 lb |
| Load Capacity Per Pair | 3500 lb |
| Individual Item Weight | 7 lb |
| Length | 48 in |
| Width | 14 in |
| Height | 8 in |
| Tire Rest Height | 6 in |
| Tire Rest Length | 10.75 in |
| Approach Angle | 9.5 degrees |
| Core Material | High density expanded polystyrene (EPS) structural foam |
| Coating Material | Textured polyurea elastomer |
| Shipping Weight | 17 lb |
| Shipping Method | Parcel |
Manuals & Downloads
- APEX Lightweight Foam Garage Ramps Sales Sheet
- APEX Garage Ramps Quick Start Guide
- APEX Limited Warranty All Products