Feel free to call or chat with us for recommendations.
Flat rate of $12.50 for orders below $500.
Click here for more info.
Short-Rise Speed for Tire, Wheel, and Detail Bays
The BendPak 10AP-SRT is a short-rise, short-column two-post lift built for jobs that do not require full standing height under the vehicle. With a 10,000-lb. lifting capacity and a maximum rise of roughly 46 inches, this compact floorplate lift is ideal for tire service, wheel work, brake jobs, detailing, inspections, and other tasks where fast access matters more than full undercarriage height.
For tire shops, detailing bays, quick-service areas, and low-ceiling garages, the 10AP-SRT gives technicians the speed and support of a two-post lift in a smaller footprint. It is designed for spaces where a full-height lift may be unnecessary or impractical, but where floor jacks and stands are too slow, too limited, or too awkward for daily work.
Compact Floorplate Design for Low-Ceiling Bays
The short-column layout helps the 10AP-SRT fit into shops and garages with limited ceiling height, while floor plates cover the hydraulic hoses, equalizing cables, and safety cable routed between the posts. This keeps routing organized and gives technicians a cleaner working path across the bay.
Because the lift is optimized for short-rise work, it is especially useful for fast-turn service operations. Vehicles can be lifted to a comfortable working height for wheels, tires, brakes, lower-body detailing, and inspection tasks without needing the ceiling clearance or bay commitment of a full-rise lift.
AP Series Arm Reach for More Vehicle Coverage
The 10AP-SRT uses BendPak AP Series swing arm design to help technicians reach a wider range of factory lift points. Triple-telescoping arms retract shorter and extend farther than traditional arm designs, while low-profile arm channels and drop-end receivers improve access under lower vehicles and hard-to-reach lift points.
Bi-Metric arm geometry gives operators more freedom to spot vehicles in symmetric or asymmetric configurations. Included cradle adapters are well suited for trucks and SUVs, and additional adapter options can expand coverage for pinch welds, height differences, and specialty lifting needs.
Automatic Arm Restraints and Shop-Ready Safety Systems
The 10AP-SRT includes BendPak’s Automatic Swing Arm Restraint System, which provides 360-degree holding grip and over 2,000 pounds of side-force resistance to help prevent unwanted arm movement during service. Safety locks in each column, spaced every 3 inches, give technicians multiple locking heights for controlled short-rise work.
Dual hydraulic direct-drive cylinders, heavy-duty aircraft-quality equalizer cables, oversized carriages, self-lubricating Dura-Glide UHMW bearings, and an electric-hydraulic HVLP power system help make the 10AP-SRT a durable, efficient lift for high-cycle service. It is compact, but it is not built like a shortcut.
Short-Rise Service Height
Raises vehicles to a practical working height for tire service, detailing, brakes, inspections, and fast-turn shop work.
10,000-lb. Capacity
Provides serious support for a compact short-column lift built around daily shop and garage service needs.
Compact Bay Fit
The short-column floorplate layout fits into low-ceiling garages and service areas where full-height lifts may not make sense.
Triple-Telescoping Arms
AP Series arms retract short and extend farther to reach more vehicle lifting points with less setup frustration.
Automatic Arm Restraints
ASARS helps hold the lift arms in place with 360-degree grip and over 2,000 pounds of side-force resistance.
Fast Tire Shop Workflow
Built for technicians who need quick lift access for wheel, tire, brake, and detailing jobs without full-rise lift height.
Recommended Add-ons
Features
- 10,000-lb. lifting capacity
- Short-rise two-post lift for tire, wheel, brake, detailing, and inspection work
- Maximum rise of roughly 46 inches
- Compact short-column design for low-ceiling shops and garages
- Floor plates cover hydraulic hoses, equalizing cables, and safety cable routing
- Exclusive Bi-Metric arm design for versatile vehicle spotting
- Four triple-telescoping arms for extended reach and compact retraction
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Electric-hydraulic HVLP power system
- Single-point safety release
- Safety locks in each column spaced every 3 inches
- Automatic arm restraints withstand over 2,000 pounds of side force
- Heavy-duty 1/2-inch aircraft-quality equalizer cables
- ALI certified
Specifications
| Lifting Capacity | 10000 lb |
| Max Capacity Per Arm | 2500 lb |
| Rise | 42.5 in |
| Max Lifting Height with Pad | 46.25 in |
| Min Lifting Height with Pad | 4.75 in |
| Lifting Time | 45 seconds |
| Height | 93.5 in |
| Width | 139 in |
| Outside Columns | 132.5 in |
| Inside Columns | 111.25 in |
| Drive-Thru Clearance | 94 in |
| Floorplate Height | 1.5 in |
| Floorplate Width | 9.5 in |
| Front Arm Reach Min | 22.5 in |
| Front Arm Reach Max | 47.5 in |
| Rear Arm Reach Min | 29.5 in |
| Rear Arm Reach Max | 57 in |
| Screw Pad Adjustment | 2.25 in |
| Horsepower | 5 HP |
| Voltage | 208-230V / 60 Hz / 1-Phase |
| Sound Level | < 43 dB |
| Shipping Dimensions | 29 x 112 x 38 in |
| Shipping Weight | 1710 lb |
| Shipping Method | Flatbed |
| Offload Requirement | Forklift |
Manuals & Downloads
- BendPak 10AP SRT 12AP SRT Mid Rise Two Post Lift 5175610 5175605 Brochure
- BendPak 10AP SRT 12AP SRT Installation Operation Manual
- BendPak Limited Warranty All Products