FREE Shipping On Order Over 80$

HDSO14AX 14,000-lb. Capacity  Open-Front Alignment Lift  Extended  Includes Turnplates and Slip Plates

HDSO14AX 14,000-lb. Capacity Open-Front Alignment Lift Extended Includes Turnplates and Slip Plates

Regular price
$13,995.00

See Lower Price in Cart

Quantity must be 1 or more


Open-Front Design and 14,000 lbs. of Might

We engineered the HDSO14AX alignment lift without a front crossbar, so operators can easily enter and exit from beneath the vehicle. Now the process of front-end adjustment becomes quick and trouble-free. This is a must for busy alignment bays. Additionally, for precise front-lift leveling, nothing beats our patented, adjustable front outrigger tubes. The infinitely adjustable pitch compensates for excessive loads and sloped floors.

Slip plates

Rear-facing multi-caster slip plates and front-facing turn plates permit precise, free-floating alignment.

Turn plates

This alignment lift features two recessed turn plate pockets that let you freely position the corrosion-resistant, galvanized turn plates.

Dual-hub cable sheaves

BendPak alignment lifts include strong, durable and oversized 10.5” diameter cable sheaves within the runway and cross tubes, as well as 2.25” diameter sheave axles. These powerful components keep your car lift running for many years, far past the point other brands’ lifts have already given out or required expensive parts replacements.

Heavy-duty aircraft cable

BendPak runs four aircraft-quality steel cables (that measure in at a robust 1/2” diameter, 6 x 25), within the columns. They are literally the ultimate standard for high-quality cable construction and safe lifting.

Adjustable height locking positions

Alignments are often done by different mechanics in a busy shop. The multiple locking heights allow different people to work on the HDSO14AX alignment lift at the height appropriate for them. Since it’s an open-front design, getting under is easy no matter how tall they are.

Built-in lubrication

Grease fittings are an essential component to every car lift we make. They keep the cable sheaves lubricated, so you don’t have to worry about productivity and safety in our design.

Flow restrictor

Should anything catastrophic occur in your shop to disrupt the functionality of your lift, we want you to feel confident that BendPak keeps your vehicles and equipment safe. If the hydraulics are cut or lose all pressure, which would be extraordinary, the built-in hydraulic flow divider still ensures a safe, even descent at all times.

Spring-loaded safety locks

Our fully adjustable locks are also found on the HDSO14AX alignment lift. Springs engage as the lock ascends into position. This design also helps keep the platforms even, even if there’s a tiny slope to your garage flooring.

Push-button pneumatic lock release

Air locks make releasing the locks simultaneous, each and every time. The instant release ensures the alignment lift platforms descend evenly.

Secondary lock system

A backup lock system protects the alignment system in the event that cable slack is detected. When this occurs, the cable is immediately “grabbed,” and the entire operation ceases immediately.

Integrated design

BendPak cables, cable sheaves and airlines run internally throughout the structure. Every one of these parts is susceptible to damage and extra wear if left exposed. We keep the look and feel of this alignment lift clean while protecting the most critical parts and components.

Electric-hydraulic power system

The power unit never needs to be maintained or adjusted. It’s also so easy and safe to use, we recommend it for both home and commercial applications.

Longer approach ramps

Because our approach ramps are longer, they make it easier to load low ground-clearance vehicles. So easy, in fact, that you’ll never scratch up the bottom of your car or struggle with the gas pedal to give enough gas without shooting onto the ramp at an unsafe speed. Simply glide on and start aligning.

Flexible protective conduit

The durable conduit that surrounds the airlines and hydraulic hoses prevents damage to the cables. It also keeps you safe from electrical shock.

Rolling bridge jacks

Rolling bridge jacks turn your alignment lift into an all-purpose four-post lift. No need to transfer to a different car lift to perform wheel and brake service. Now you can change brake rotors right before you align the wheels, all on the same lift. Rolling bridge jacks are a safe and space-saving way to increase shop capability without purchasing more equipment.

Specifications HDSO14AX
  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets
  • Automatic leveling system
  • Multiple auto-leveling locking positions
  • Runways include rail‐kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal “Anti-Sway” UHMW slider blocks in each column
  • Features oversize sheaves and heavy‐duty 1/2” aircraft cable
  • Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
  • Multi‐position safety locks in each column with push‐button safety release
  • Runways adjust for different tread widths and feature a durable matte finish
  • Optional 7,000-lb. capacity bridge jacks available (Model RJ‐7) 14,000-lb. lifting capacity
Lifting Capacity
14,000 lbs (6,350 kg)
A - Overall Width / Front
143.25" (3,638 mm)
A - Overall Width / Rear
130" (3,304 mm)
B - Outside Length
215.5" (5,472 mm)
C - Overall Length
244.5" (6,209 mm)
D - Height of Columns / Front (*)
103.25" (2,623 mm)
D - Height of Columns / Rear(*)
92" (2,338 mm)
E - Min. Runway Height
7.75" (196 mm)
F - Max. Rise
77.5" (1,970 mm)
G - Max Lifting Height
70" (1,778 mm)
H - Width Between Columns / Front
123" (3,124 mm)
H - Width Between Columns / Rear
120" (3,050 mm)
I - Runway Width
20.5" (520 mm)
J - Width Between Runways(**)
42" (1,067 mm)
K - Length of Runways
197.5" (5,017 mm)
L - Min. 4- Wheel Alignment (***)
89" (2,261 mm
M - Max 4 Wheel Alignment (***)
156" (3,962 mm)
N - Max 2 Wheel Alignment (***)
182" (4,623 mm)
Min. Wheelbase @ Rated Capacity
140" (3,556 mm)
Min. Wheelbase 75% Rated Capacity
120" (3,048 mm)
Min. Wheelbase 50% Rated Capacity
100" (2,540 mm)
Min. Wheelbase 25% Rated Capacity
80" (2,032 mm)
Locking Positions
15
Lock Spacing
Every 4" (102 mm)
Lifting Time
60 Seconds
Standard Motor
220 VAC / 60Hz 1 Ph.
Emission sound pressure at Operator Position < 70 dB(A)
* Safety Ladder Adjustment bolt may add up to 3.75 in. / 95 mm to overall column height.
** This dimension may be limited with the addition of rolling jacks.
*** For CE compliant countries see errata sheet included with control panel.
The design, material and specifications are subject to change without notice.

WARNING: California Prop 65


;

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods