Feel free to call or chat with us for recommendations.
Flat rate of $12.50 for orders below $500.
Click here for more info.
Super-Long QuickJack Reach for EVs That Refuse to Fit the Usual Lift
The QuickJack 6000ELX Super-Long Portable Car Lift is built for the vehicles that pushed ordinary portable lifts to their limit. With a 6,000-lb. capacity, 24.5-inch lifting height, and 86.75-inch frame length, the 6000ELX gives long-wheelbase EVs, luxury electric sedans, and vehicles with extreme lift point spreads a real QuickJack solution without requiring a full-size two-post or four-post lift.
This is the only QuickJack model in the ELX series, and that is the point. It exists for the small but important group of vehicles that fall outside the normal TL and TLX lift point range. If the lift points sit far out toward the edges of the chassis, the 6000ELX gives shops, detailers, and serious garages the extra reach needed to lift with confidence.
Built for Long-Wheelbase Electric Vehicle Lift Points
EVs are often heavier than similar gas-powered vehicles, and many place their manufacturer-recommended lift points farther apart than conventional portable lifts can reach. The 6000ELX was designed around those long lift point spreads so technicians and enthusiasts can service modern electric vehicles without forcing the wrong lift into the job.
QuickJack’s cantilevered frame design helps the frames rise without rubbing against the vehicle tires, even when working with long wheelbases. That makes the 6000ELX a smart choice for contemporary EV cars, luxury electric vehicles, and other 6,000-lb. and under vehicles that need more reach than a standard portable car lift can provide.
Open-Center EV Service Without the Permanent Lift Footprint
The 6000ELX keeps the open-center access that makes QuickJack so useful for undercar work, detailing, inspections, tire service, brake work, and general maintenance. You get access beneath the vehicle without parking a permanent lift in the middle of the bay or giving up valuable garage space.
For smaller shops, private garages, and detailers that cannot fit a full-size lift, the 6000ELX fills a real gap. It brings super-long portable lift capability to vehicles that otherwise might require larger fixed equipment, helping more users work on long-wheelbase EVs in practical spaces.
Premium QuickJack Safety with Portable Setup Convenience
Like the rest of the premium QuickJack lineup, the 6000ELX uses automatic safety locks and a portable frame system that can be positioned when needed and stored when the job is done. The result is a serious EV-capable portable car lift that still fits the QuickJack way of working.
The 6000ELX is not trying to be every lift for every vehicle. It is the specialized long-reach QuickJack for users who need to lift electric vehicles and other long-wheelbase cars the right way, with frame-engaging support, open-center access, and the mobility that made QuickJack famous.
Super-Long Frame Reach
The 86.75-inch frame length helps reach lift points on long-wheelbase EVs and luxury electric vehicles that standard portable lifts may not fit.
6,000-lb. EV Capacity
Built with a 6,000-lb. capacity to handle many modern electric sedans and long-wheelbase vehicles with heavier curb weights.
24.5-Inch Lift Height
Raises vehicles up to 24.5 inches for brake work, tire service, inspections, detailing, and undercar maintenance.
Cantilevered Frame Design
QuickJack’s frame geometry is designed to rise without rubbing against vehicle tires during the lift cycle.
Open-Center Access
Independent frames leave the center of the vehicle open for underbody access without the footprint of a permanent lift.
Purpose-Built ELX Model
The 6000ELX is the dedicated long-reach model for vehicles that fall outside the typical TL and TLX lift point range.
Recommended Add-ons
Features
- 6,000-lb. lifting capacity
- 24.5-inch lifting height
- 86.75-inch frame length
- Super-long portable car lift design
- Designed for long-wheelbase EVs and luxury electric vehicles
- Built for wide lift point spreads
- Frame-engaging lift configuration
- Cantilevered frames help avoid tire interference
- Open-center access for undercar work
- Automatic safety locks
- Portable setup for garages, shops, and detailing spaces
- Useful where full-size lifts are not practical
- Designed for vehicles 6,000 lbs. and under
- Supports EV service and maintenance workflows
- Single-model ELX series built for specialized long-reach lifting
Specifications
| Lifting Capacity | 6000 lb |
| Lowered Height with 2 Inch Block | 3.5 in |
| Lifting Height with 2 Inch Block | 21 in |
| Lifting Height with 3 Inch Block | 22 in |
| Max Lifting Height | 22 in |
| Lift Height with Adapters | 24 in |
| Lift Height with Adapters and Pin | 26.75 in |
| Lifting Time | 30 seconds |
| Min Lift Point Spread | 53 in |
| Max Lift Point Spread | 76 in |
| Frame Width Each | 12.5 in |
| Frame Length Each | 86.75 in |
| Frame Weight Each | 112 lb |
| Horsepower | 2 HP |
| Shipping Method | LTL |
| Offload Requirement | Liftgate |
Manuals & Downloads
- QuickJack 6000TL 8000TL Series Portable Car Lift Brochure
- QuickJack 3500SLX 6000TL 6000TLX 8000TL 8000TLX 6000EXT Assembly Operation Manual
- QuickJack Limited Warranty