Feel free to call or chat with us for recommendations.
Flat rate of $12.50 for orders below $500.
Click here for more info.
The Pirate Brand 888-0022-03812PB is a 120 cu ft (3,398 liter, 6 ton) SPH PINCH bulk abrasive blast machine with pneumatic controls. It is built for contractors and industrial blasting operations that need a large abrasive load for long production runs, and it is bulk bag rack ready. This pressure hold machine uses pinch valves and a heavy wall, ASME-certified pressure vessel rated for 150 PSI.
How It Works
This is a pressure hold system with pinch valves and a metering valve. Abrasive is loaded through the closure assembly at the top of the vessel and flows down to the bottom, where it exits through the metering valve once blasting starts. To pressurize, the blow-down and inlet valves must be closed and the top closure properly sealed. When the compressor is connected and turned on, the emergency air tank is pressurized and the pinch valves close. Opening the inlet valve lets compressed air pass through the moisture separator and fill the vessel. Squeezing the control handle opens the pinch valve, and the air and abrasive mixture flows through the blast hose to the nozzle. When the handle is released, the vessel stays pressurized. To depressurize, manually close the inlet valve and open the blow-down valve.
Key Features
- 3/8" thick heavy wall pressure vessel rated for 150 PSI, hydro tested to 225 PSI
- ASME and CRN for all provinces; fully seal welded
- Safety valve for checking whether the vessel is pressurized before opening the top closure
- Emergency air tank keeps the pinch valves closed if the air compressor fails (SPH PINCH systems)
- Powder coated curved ergonomic ladders with twisted rungs and grab bars
- Rack ports make the machine bulk bag rack ready
- Air manifold distributes air to each outlet and the pressure vessel
- Easy access blow-down valve, reachable from ground level
- 4" clean out port
- Hex nipple fittings at the pusher line connections to help prevent gasket damage
- Enclosed, waterproof manual box keeps the manual close at hand
- Tie down hooks for secure transport
Specifications
| Model | 888-0022-03812PB |
|---|---|
| Series | S-Series SPH PINCH (pressure hold) |
| Capacity | 120 cu ft (3,398 liters), 6 ton |
| Controls | Pneumatic, with dead-man control handles |
| Valves | Pinch valves with metering valve |
| Pressure vessel | 3/8" wall, rated 150 PSI, hydro tested to 225 PSI, ASME and CRN, fully seal welded |
| Clean out port | 4" |
| Warranty | 5 year limited on the complete blaster; 10 year limited on the pressure vessel |
| Fits | Schmidt Manufacturing (Axxiom) |
What's Included
- Pneumatic dead-man control handles with 110' pneumatic twin-line control hose per outlet
- Standard features listed above
Note: bulk abrasive blast machines do not include mounts. Choose a trailer, skid or leg extension mount separately. Options and upgrades are available, including the Interior Posi Seal Valve, Lock Out Tag Out safety system and Safety Relief Valve Kit.
Documents
Not sure it fits? Call 888-714-1410 with your machine model and the number on your old part and we'll confirm it.