Feel free to call or chat with us for recommendations.
Flat rate of $12.50 for orders below $500.
Click here for more info.
The Pirate Brand 888-0024-03812PB is a 120 cu ft (3,398 liter, 6 ton) bulk abrasive blast machine from the S-Series SPH PINCH line. It uses pneumatic controls and pinch valves, and is built for contractors and industrial shops that need a large abrasive reserve for long, high-production blasting jobs. Bulk machines ship without mounts, so a trailer, skid or leg extension mount is selected separately.
How It Works
This is a pressure hold (SPH) system with pinch valves and metering valves. Abrasive is loaded through the closure at the top of the vessel and flows to the bottom, where it exits through the metering valve when blasting starts. Before pressurizing, the blow-down and inlet valves must be closed and the top closure properly sealed. When the compressor is connected and turned on, the emergency air tank fills and the pinch valves close. Opening the inlet valve then lets air pass through the moisture separator and fill the vessel. When the operator activates the control handle, the pinch valve opens and the air and abrasive mixture flows through the blast hose and nozzle.
When the control handle is released, the vessel stays pressurized. To depressurize, manually close the inlet valve and manually open the blow-down valve. The emergency air tank holds a reserve of compressed air to keep the pinch valves closed if the compressor fails.
Key Features
- 120 cu ft (3,398 liter) bulk capacity, about 6 tons of abrasive
- 3/8" thick heavy-wall pressure vessel rated for 150 PSI, hydro tested to 225 PSI
- ASME and CRN for all provinces; fully seal welded
- Pneumatic controls with dead-man control handles and 110' pneumatic twin-line control hose per outlet
- Emergency air tank keeps the pinch valves closed in the event of compressor failure
- Safety valve lets the operator check whether the vessel is pressurized before opening the top closure
- Powder coated curved ergonomic ladders with twisted rungs and grab bars
- Rack ports make it bulk bag rack ready
- Air manifold distributes air to each outlet and the pressure vessel
- Easy access blow-down valve near the bottom of the vessel, reachable from ground level
- 4" clean out port
- Hex nipple fittings at the pusher line connections to prevent gasket damage
- Enclosed manual box with waterproof manual; tie down hooks for secure transport
Specifications
| Model | 888-0024-03812PB |
|---|---|
| Series | S-Series SPH PINCH (pressure hold) |
| Capacity | 120 cu ft (3,398 liters), 6 ton |
| Controls | Pneumatic |
| Valves | Pinch valves with metering valves |
| Vessel wall | 3/8" thick |
| Vessel rating | 150 PSI; hydro tested to 225 PSI |
| Certification | ASME and CRN for all provinces |
| Maximum supply air | Do not exceed 150 psi |
| Clean out port | 4" |
| Warranty | 5 year limited on the complete blaster; 10 year limited on the pressure vessel |
What's Included
- Standard features listed above, including the safety valve, rack ports, air manifold, blow-down valve, clean out port, ladders, manual enclosure and tie down hooks
- Pneumatic dead-man control handle and 110' twin-line control hose per outlet
- Not included: mounts. Choose a trailer, skid or leg extension mount separately.
The machine is fully customizable with available options and upgrades, such as the Posi Seal safety valve, relief valve kit and lock out tag out system. Call 888-714-1410 with questions about configuring your machine.