HVLP (High Volume Low Pressure) uses 10 PSI or less at the cap, reducing overspray and material waste—ideal for finish work. Conventional guns operate 25–40 PSI, delivering higher transfer efficiency for heavier coatings and faster coverage. Choose HVLP for precision; conventional for production speed and thick-film applications.

Dual regulation (separate fluid and atomizing air controls) gives you independent adjustment of spray pattern and fluid flow. Single-regulated systems tie both functions together, limiting flexibility. Dual regulation is worth the upgrade if you spray multiple fluid types or need fine-tuned atomization for clear coats and repairs.

Conventional guns typically need 8–12 CFM at 25–35 PSI. HVLP guns demand 10–15 CFM at 10 PSI. Check your specific gun's nameplate, then verify your compressor delivers that CFM at your operating pressure. Undersized compressors cause pulsing, poor atomization, and incomplete jobs.

Yes, but flush thoroughly between material types. Steel tanks are compatible with most industrial coatings. For water-based fluids, ensure all gaskets and seals are compatible—some older Binks tanks may have cork gaskets that swell in water. Check your tank's parts list or contact our support team before switching fluid types.

Yes. Binks has maintained strong backward compatibility. Gaskets (like the QMS-80-1 for 2-gallon tanks), regulator cartridges, and gun components are stocked as separate items. We carry legacy and current-production parts—verify your tank's serial number or model code, and we'll source the exact replacement you need.