FREE Shipping On Order Over $500

Collection: Two-Post Lifts

About 2 Post Car Lifts · Buying Guide · Compare Brands

 Shop the full line of 2 post car lifts at Pittsburgh Spray Equipment — 10,000-lb budget lifts under $2,500 up to 18,000-lb professional clearfloor lifts for heavy-duty shop use. Symmetric and asymmetric arm configurations, floor-plate and clearfloor overhead designs, and the MaxJax M7K portable for tight-ceiling garages.  Not sure which model fits your garage or shop? Call 888-714-1410 or email sales — real technical support, no phone tree.

Why buy from Pittsburgh Spray Equipment

  • Tech support that answers — call 888-714-1410 or email sales, no phone tree
  • Financing available — Credit Key + Klarna at checkout on qualifying orders

Read our 2026 buying guide

New to 2 post lifts or comparing models? Read our full Best 2 Post Car Lifts 2026 buying guide — ranks budget picks vs value vs  pro-shop, plus a complete symmetric-vs-asymmetric, floor-plate-vs-clearfloor, and capacity guide.

2 Post Lift Buying Guide

Budget-Friendly Options 

Looking for a lift that costs less, check out these options.  ETL/CE certified, 1-year warranty with US-based support. Start with the KT-H105 ($2,176) for a basic 10K floor-plate, step up to the KT-M120 ($2,882) for a 12K clearfloor, or go heavy-duty with the KT-M150D ($4,705) for a 15K clearfloor with direct-drive hydraulics.

Value Options — $5,000 – $7,500)

Dannmar is BendPak's value line — same California engineering, same distribution, same warranty support, but manufactured at a lower price point than the flagship XPR series. The D2-10A ($5,280) and D2-10C ($5,273) are the sweet-spot picks for buyers who want BendPak-family reliability at budget friendly pricing. Step up to the D2-12C ($7,514) for 12K capacity on heavier trucks and vans.

Pro-Shop Options — BendPak XPR ($5,000 – $20,000)

The BendPak XPR series is the professional-grade lineup — the same lifts you see in dealership service bays and heavy-truck facilities. Made in the USA, ALI-certified (Automotive Lift Institute), 5-year structural warranty. Entry-level XPR-10AS-LP ($5,384) for a one-bay shop, mid-tier XPR-12CL ($11,895) for daily commercial use, heavy-duty XPR-15CL-192 ($19,095) for larger trucks and commercial vans, and the flagship XPR-18CL ($20,395) for box trucks and buses.

Portable / Low Ceiling — MaxJax M7K

The BendPak MaxJax M7K ($5,195) is the answer for home garages with ceilings under 10 feet, or rented spaces where you can't drill permanent floor anchors. Posts detach and store between uses; floor sockets remain flush in the concrete. 7,000-lb capacity covers most passenger cars and light trucks. The only real "portable 2-post lift" on the market.

Symmetric vs. Asymmetric — Which Do You Need?

Symmetric lifts place the swing arms equally forward and rearward — best for trucks, SUVs, and vans where weight is more evenly distributed. Asymmetric lifts rotate the posts about 30° so the front arms are shorter, letting the driver door open past the post — essential for sedans and sports cars. Rule of thumb: cars and SUVs → asymmetric; trucks and vans → symmetric.

Floor Plate vs. Clearfloor

Floor plate lifts have a drive-over bar at floor level — cheaper, lower ceiling requirement (~10 ft), but the floor bar limits your ability to roll a jack under the vehicle. Clearfloor lifts move the cross-beam overhead, leaving the floor completely clear. Professional standard. Requires ~12 ft ceiling minimum. Every serious shop uses clearfloor.

Capacity — How Much Do You Need?

10,000 lb — all passenger cars, SUVs, and half-ton trucks (F-150, Silverado 1500, Ram 1500). Fine for 99% of home garage and independent shop needs.
12,000 lb — three-quarter-ton trucks (F-250, 2500 series), full-size SUVs, and sprinter/transit vans.
15,000 lb — heavy-duty duallys, larger commercial vans, and light commercial trucks.
18,000+ lb — box trucks, larger commercial vehicles, buses.

Frequently Asked Questions

Can I install a 2 post lift in my home garage?
Yes — most home garages built after 1985 have a 4-inch reinforced concrete slab that will support a 10-12K lift. Confirm ceiling height (12 ft for standard clearfloor, 10 ft for floor-plate or MaxJax). Verify slab thickness before ordering.

 

Do you deliver and install?
We ship nationwide via LTL freight. Installation is available as a add on within 3 hours of Pittsburgh Pennsylvania simply contact us for a optional installation price 

Financing?
Yes — we offer financing  at checkout on lifts over $1,000, plus commercial net-30 accounts for business buyers. Call 888-714-1410 for financing questions.

54 products
Price ⌃
Brand ⌃
Lift Capacity ⌃
Features ⌃
  • 9,000 Lb 2 Post Clear Floor Lift Symmetric Arms Chain Drive Dual Point Lock Release - Tuxedo Lifts TP9KSCX
    9,000 Lb 2 Post Clear Floor Lift Symmetric Arms Chain Drive Dual Point Lock Release - Tuxedo Lifts TP9KSCX
    Regular price
    $3,310.00
    Sale price
    $3,310.00
  • 9,000 Lb 2 Post Floor Plate Lift Symmetric Arms Chain Drive - Tuxedo Lifts TP9KFX
    9,000 Lb 2 Post Floor Plate Lift Symmetric Arms Chain Drive - Tuxedo Lifts TP9KFX
    Regular price
    $2,940.00
    Sale price
    $2,940.00
  • Graco FAR655K 2 Post Ram Cylinder Seal Kit
    Graco FAR655K 2 Post Ram Cylinder Seal Kit
    Regular price
    $200.00
    Sale price
    $200.00
  • 10,000 Lb 2 Post Lift 168 Inch Overall Height Expandable Top Beam Bi-Metric Arms - BendPak 10AP168 (5175305)
    10,000 Lb 2 Post Lift 168 Inch Overall Height Expandable Top Beam Bi-Metric Arms - BendPak 10AP168 (5175305)
    Regular price
    $6,595.00
    Sale price
    $6,595.00
Added to cart View Cart


Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods