Feel free to call or chat with us for recommendations.
Flat rate of $12.50 for orders below $500.
Click here for more info.
The P00902 Time Delay / Auto Start-Stop system can be added to any existing Industrial pressure washer with a 2 hp to 10 hp motor, either single-phase or 3-phase. MUST BE INSTALLED BY A QUALIFIED CERTIFIED ELECTRICIAN How It Works: To activate the system, simply push the green button on the control box. The pressure washer will start when the trigger gun is pulled and will continue running while the gun is in use. When the trigger gun is released, a timer will begin counting down for approximately 1 minute. If the trigger is pulled again within that time, the pressure washer will remain running. If the trigger is not pulled in time, the machine will automatically shut down. To resume washing, simply pull the trigger again. For safety, we recommend turning off the control box after each use to prevent accidental starting of the pressure washer. Installation Note: A qualified, licensed electrician should install the P00902 Time Delay / Auto Start-Stop system. Please note that this control box and switch are not explosion-proof. Key Features: Auto Start-Stop Functionality: Automatically powers off the pressure washer when the trigger gun is released and water flow stops. The system powers the washer back on once the trigger gun is pulled again. Compatible with electric-powered cold water pressure washers ranging from 2 hp to 10 hp.
Specifications
| Flow Rate in GPM / LPM | 8 gpm max |
| Horsepower | 2-10 H.P motor single or 3 phase |
| Pressure in PSI / Bar | 4000 max |
Questions about fit? Call 888-714-1410 with your Cam Spray model number.