Feel free to call or chat with us for recommendations.
📦
Ships in 1-2 weeks, shipping times may vary
🚚
Free Shipping on orders $500 and up., some items have a optional lift gate for a additional fee
Flat rate of $12.50 for orders below $500.
Click here for more info.
Flat rate of $12.50 for orders below $500.
Click here for more info.
🔁
30-day returns. Click here for more info.
Genuine Graco 16A258 is a 1/8 in. steel spacer for the cutter shaft on Graco diamond blade cutters. It sets the blade spacing in the drum and cutter assembly and is used with all Diamond Blade Cutters. It goes in Graco GrindLazer floor surface preparation equipment, which removes paint and coatings, grease, dirt and ice build-up from floors.
Features
- 1/8 in. thickness spacer
- Steel construction
- For use with all Diamond Blade Cutters
- Listed in the Drum and Cutter parts lists (ref. 211)
- Companion 1/4 in. spacer is 16A257
- Approx. 2.9 x 2.9 x 0.15 in., 0.11 lb
Fits These Graco Models
- GrindLazer (571002, 571003, 571004, 571260)
- GrindLazer diamond drum / cutter assemblies (parts manual 3A5929)
Where It Is in the Graco Manual
- Item 211, page 13 of Graco manual 3A0103 (highlighted in the photo above)
- Item 211, page 22 of Graco manual 3A5929 (Diamond Drum)
Other Parts on the Same Graco Parts List
- Graco 123791 SCREW, CAP, HEX HD
- DRUM, GRIND LAZER, 10 INCH (PAINTED)
- Graco 24D979 Kit, Rod, Drum, Scarifier, 6 Pack
- Graco 16A259 CAP, END, THREADED
- Graco 24E289 KIT, BLADE, DIA., 5 PT, SINGLE, GL
- Graco 123252 KEY, SQUARE
- Graco 24D982 GrindLazer Diamond Drum Kit
- Graco 2001725 DRUM,7.0, COMPLETE,PDC,FLAT,10 WIDTH
Specifications
| Part Number | 16A258 |
| UPC | 00633955549661 |
| Country of Origin | US |
| Height | .15 IN |
| Length | 2.9 IN |
| Width | 2.9 IN |
| Shipping Weight | .11 LBS |