Not the Graco FinishPro sprayer part you're looking for?
Browse all Graco Replacement Parts for FinishPro Sprayers →
Feel free to call or chat with us for recommendations.
📦
Ships in 1-2 weeks, shipping times may vary
🚚
Free Shipping on orders $500 and up., some items have a optional lift gate for a additional fee
Flat rate of $12.50 for orders below $500.
Click here for more info.
Flat rate of $12.50 for orders below $500.
Click here for more info.
🔁
30-day returns. Click here for more info.
Genuine Graco 288843 is a replacement control board kit. It goes in the FinishPro 395 sprayer and the FinishPro II 395 compressor. It is the board specified for one model in each line.
Features
- Control board repair kit
- Qty 1 per sprayer or compressor
- Specified for FinishPro 395 sprayer model 255115
- Specified for FinishPro II 395 compressor model 24U070
- Also listed in Graco's thermal pad installation instructions
- Shipping weight 0.62 lbs
Fits These Graco Models
- FinishPro 395 Sprayer (255115)
- FinishPro II 395 Compressor (24U070)
- Control boxes covered by the thermal pad repair installation instructions
Service Notes
- Before installing a control board, check whether a thermal pad is already installed inside the empty control box (Graco manual 3A9242).
- If a thermal pad is already installed, refer to the relevant control board or operation manual (309709, 309674 or 333126) for the steps to install the control board (Graco manual 3A9242).
Where It Is in the Graco Manual
- Item 49, page 6 of Graco manual 333154 (highlighted in the photo above)
- Item 288843, page 6 of Graco manual 312100 (FinishPro 395 Sprayers 6 FinishPro 395 Sprayers Ref. Part Description )
- Item 288843, page 7 of Graco manual 333154 (Ref. Part Description Qty.)
- page 1 of Graco manual 3A9242 (3A9242A EN Repair Thermal Pad Installation Instructions)
Other Parts on the Same Graco Parts List
- Graco 107434 Thrust Bearing
- Graco 117828 Encapulated PTFE O-Ring Kit
- Graco 111457 O-ring Packing
- Graco 111600 - Grooved Pin
- Graco 115522 SCREW, MACH, PNH
- Graco 115494 SCREW, MACH.,PHILLIPS, PAN HD
- Graco 115498 SCREW
- Graco 116073 WASHER For Thrust
Specifications
| Part Number | 288843 |
| UPC | 00633955227064 |
| Height | 2.3 IN |
| Length | 5.75 IN |
| Width | 4.25 IN |
| Shipping Weight | .62 LBS |