FREE Shipping On Order Over 80$

Grizzly T34028 - 3" x 79" Silicon Carbide Belts 100 Grit, 5 Pk.

Grizzly T34028 - 3" x 79" Silicon Carbide Belts 100 Grit, 5 Pk.

Regular price
Sale price
Quantity must be 1 or more

T34028 5-pack of 3" x 79" Silicon Carbide Sanding Belts–100-Grit

100-grit replacement sanding belts for your knife grinder.

Made with premium Silicon Carbide abrasive grains, the T34028 100-Grit 3" x 79" Sanding Belts are a great choice for grinding, shaping, and maintaining sharp metal edges.

Silicon Carbide abrasive is known for its exceptional ability to produce smooth and consistent results in polishing, grinding, and intricate detail work. It's also commonly used for sanding non-ferrous metals, plastics, and composites due to its heat resistance and low clogging tendency.

100-grit paper is a moderately fine abrasive used for further refining surfaces after initial sanding. It helps smooth out imperfections and is suitable for light material removal. This grit level provides a good compromise between smoothing and maintaining a decent material removal rate.

It is important to sequence your sanding from a lower number to a higher number without bypassing more than one grit. Doing so may not remove the marks from the rougher grit.

The 3" x 79" size is ideal for use on knife grinders–especially on the Grizzly G0489 G0952 and the G0972.

Within the belt thickness rating system, the X-weight backing extremely heavy-duty cloth is used for tough application.

Built to last, the added strength of this backing ensures that the belt stays in place and doesn't wear out too quickly, even with heavy use.

The combination of a robust backing and aggressive abrasive grains makes it suitable for removing material quickly and efficiently.

These belts can be run in either direction and are flexible for easy contouring and shaping of your knife edges.

The Grizzly Customer Service and Technical Support Teams are U.S.-based.

Additional sanding belts are available both online and in store and are shipped from both Grizzly warehouses in Springfield, MO and Bellingham, WA.

Made in the USA


  • Grit: 100
  • Size: 3" x 79"
  • Quantity: 5
  • Paper weight: X
  • Abrasive grain: Silicon carbide


  • Full resin bond
  • Bump free tape seam
  • Runs in either direction


Net Orders Checkout

Item Price Qty Total
Subtotal $0.00

Shipping Address

Shipping Methods