Collection: BluBird Fuel Transfer Hoses

Shop BluBird OilShield farm fuel transfer hoses in 3/4 inch and 1 inch I.D., from short 12 ft tank-to-equipment hoses to longer runs. Each is 100% rubber with an RMA Class A oil-resistant tube and cover, polyester braid, a built-in static wire, strain relief springs on both ends and 100 PSI working pressure, and stays flexible down to -30°F. Questions on fittings or sizing? Call (888) 714-1410 or email sales@pittsburghsprayequip.com.

Why buy from Pittsburgh Spray Equipment

• Help choosing the I.D. that matches your pump's outlet and flow rate, so the nozzle fills at full speed.
• Matching BluBird fuel hose reels and swivels when you want the hose off the ground.
• Financing available on larger fuel-handling orders.

Choosing a fuel transfer hose

Match the hose I.D. to your transfer pump outlet: 3/4 inch fits most farm and tank-mounted transfer pumps, while 1 inch is for higher-flow pumps and bulk tank dispensing where a smaller hose would restrict flow.

Keep the hose short for tank-mounted pumps (12 to 14 ft) and go longer only when the pump can't sit near the equipment, since every extra foot adds friction loss.

FAQ

Why does a fuel hose need a static wire?
Fuel moving through rubber builds static charge. The embedded wire, bonded at the fittings, bleeds that charge to ground instead of letting it spark at the nozzle.

Are these UL listed?
No. BluBird rates OilShield farm fuel hoses for use where UL approval is not required, such as on-farm tank and equipment fueling. Retail fuel dispensers need a UL-listed hose.