Collection: Slip Rolls
Slip rolls are essential metalworking machines designed to bend, curve, and form sheet metal into cylindrical or conical shapes without creasing or marring the material surface. Used across fabrication shops, HVAC contractors, custom metal work, and manufacturing facilities, slip rolls handle everything from light-gauge decorative panels to heavier structural components. The machines work by passing sheet metal between rotating rollers—typically three or four depending on design—that gradually increase pressure to create smooth, consistent curves. Pittsburgh Spray Equipment carries Grizzly slip rolls in multiple capacities, from compact 36-inch models suited for smaller shops to heavy-duty 51-inch powered units for high-volume production. Grizzly machines offer manual and motorized options, allowing buyers to match speed and ease of operation to their production demands. Key differences among slip rolls include working width, maximum material thickness (gauge), roller diameter, and whether the machine features powered feed or manual operation. The right slip roll depends on your typical material thickness, production volume, and available shop floor space.
How to Choose the Right Slip Rolls
- Maximum working width: Choose 36", 41", or 51" based on largest pieces you regularly bend.
- Material gauge capacity: Verify machine handles your thickest stock—check both steel and aluminum specs separately.
- Powered vs. manual feed: Powered models reduce operator fatigue and improve consistency on high-volume runs.
- Roller diameter and construction: Larger rollers reduce marking and allow smoother bends on lighter gauge materials.
- Motor horsepower (if powered): Confirm adequate HP for your material hardness; 2–3 HP typical for general fabrication work.
- Voltage and phase availability: Verify single-phase (120/240V) or three-phase (460V) matches your shop's electrical service.
- Footprint and weight: Measure available space; larger models weigh 500–1500 lbs and may require reinforced flooring.
- Warranty and parts availability: Grizzly machines backed by warranty; confirm local service and parts support through Pittsburgh Spray Equipment.
Model Comparison
| Model | Working Width | Max. Capacity (Steel) | Drive Type | Price Range |
|---|---|---|---|---|
| Grizzly T21318 - 36" Slip Roll | 36 inches | 22-gauge steel | Manual | $ |
| Grizzly T32718 - 41" Slip Roll | 41 inches | 18-gauge steel | Manual | $ |
| 51" Powered Slip Roll | 51 inches | 16-gauge steel (powered) | Powered motor | $ |
Frequently Asked Questions
What gauge material can a 36-inch slip roll handle, and can it bend both steel and aluminum?
The Grizzly T21318 36-inch model handles 22-gauge steel efficiently. Aluminum is softer and allows slightly heavier gauges—typically 20-gauge aluminum on the same machine. Always verify your specific material hardness and temper with the manufacturer specs before running maximum-thickness stock.
Do I need a powered slip roll, or is manual operation sufficient for a small fabrication shop?
Manual slip rolls work well for low-volume or intermittent bending. Powered models (like the 51" Grizzly) reduce operator fatigue, deliver consistent pressure, and speed production on high-volume jobs. Consider powered if you bend material more than 5–10 hours weekly or handle material thicker than 18-gauge regularly.
How much floor space does a 41-inch slip roll require, and can it sit on a standard workbench?
The Grizzly T32718 41-inch model requires a sturdy, level stand or table—typically 5–6 feet long and 2–3 feet deep. Weight ranges 800–1200 lbs, so a heavy-duty fabrication table or dedicated machine base is essential. Standard workbenches cannot safely support this load.
What's the difference between a 41-inch and 51-inch slip roll in terms of actual production capability?
The 10-inch width increase allows longer material runs and larger finished diameters without partial bending. The 51-inch powered model also handles thicker gauge (16-gauge vs. 18-gauge on the 41") and accepts higher pressure from motorized feed, making it suited for production shops handling structural or heavy decorative work.
Can a slip roll bend conical shapes, or only cylinders?
Slip rolls bend primarily cylindrical shapes by adjusting roller gaps uniformly. Conical shapes require variable-gap adjustment (offset rollers) on specialty machines or multiple passes with changing gap settings. Standard Grizzly models create true cylinders; consult with Pittsburgh Spray Equipment for conical work requirements.
-
Bushing 20 x 26 x 17mm Replacement Part for SR-1220M Slip Roll - Baileigh SR1220M-11
- Regular price
- $9.99
- Sale price
- $9.99
-
3-in-1 Pan and Box Brake with Slip Roll and Shear 52 Inch 20 Gauge Mild Steel 9 Adjustable Fingers - MechMaxx MMCB5220
- Regular price
- $2,449.00
- Sale price
- $2,449.00
-
3-in-1 Pan and Box Brake with Slip Roll and Shear 40 Inch 20 Gauge Mild Steel Adjustable Fingers - MechMaxx MMCB4020
- Regular price
- $1,599.00
- Sale price
- $1,599.00
-
3-in-1 Pan and Box Brake with Slip Roll and Shear 30 Inch 20 Gauge Mild Steel Adjustable Fingers - MechMaxx MMCB3016
- Regular price
- $1,099.00
- Sale price
- $1,099.00
-
Baileigh SR5016E-STICKER SET SR-5016E Slip Roll Complete Sticker Set
- Regular price
- $8.99
- Sale price
- $8.99
-
Motor 1.5 HP 110V Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-MOTOR
- Regular price
- $624.99
- Sale price
- $624.99
-
Foot Pedal Cord Replacement Part for SR-5016E Electric Slip Roll - Baileigh SR5016E-FPC
- Regular price
- $79.99
- Sale price
- $79.99
-
Auxiliary Roller Replacement Part for SR-5016E Electric Slip Roll - Baileigh SR5016E-9
- Regular price
- $793.99
- Sale price
- $793.99
-
Adjustment Roller Replacement Part for SR-5016E Electric Slip Roll - Baileigh SR5016E-6
- Regular price
- $774.99
- Sale price
- $774.99
-
Complete Foot Pedal Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-50-53
- Regular price
- $466.99
- Sale price
- $466.99
-
Compression Spring Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-47
- Regular price
- $5.99
- Sale price
- $5.99
-
Round Machine Key 6 x 6 x 40 Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-43
- Regular price
- $5.99
- Sale price
- $5.99
-
Round Machine Key 6 x 6 x 25 Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-42
- Regular price
- $5.99
- Sale price
- $5.99
-
Left Hand Frame Replacement Part for SR-5016E Electric Slip Roll - Baileigh SR5016E-4
- Regular price
- $453.99
- Sale price
- $453.99
-
Shell Needle 1 x 1.25 x 1 Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-37
- Regular price
- $49.99
- Sale price
- $49.99
-
Spring Pin 3 x 30mm Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-32
- Regular price
- $4.99
- Sale price
- $4.99
-
Handle Replacement Part for SR-5016E Electric Slip Roll - Baileigh SR5016E-31
- Regular price
- $16.99
- Sale price
- $16.99
-
Auxiliary Roller Bolt Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-27
- Regular price
- $19.99
- Sale price
- $19.99
-
Black Collar 26/32/4 mm Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-25
- Regular price
- $9.99
- Sale price
- $9.99
-
Gear Wheel Shaft Replacement Part for SR-5016E Electric Slip Roll - Baileigh SR5016E-23
- Regular price
- $16.99
- Sale price
- $16.99
-
Driven Gear M4 x 16T Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-22-GEAR
- Regular price
- $93.99
- Sale price
- $93.99
-
Small Chain Wheel Sprocket Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-17
- Regular price
- $87.99
- Sale price
- $87.99
-
Handle Sleeve 50 mm Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-15
- Regular price
- $57.99
- Sale price
- $57.99
-
Supporting Bushing Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-12
- Regular price
- $70.99
- Sale price
- $70.99
-
Steel Flange Bushing Replacement Part for SR-5016E Slip Roll - Baileigh SR5016E-11
- Regular price
- $70.99
- Sale price
- $70.99
-
Square Bushing Replacement Part for SR-5016E Electric Slip Roll - Baileigh SR5016E-10
- Regular price
- $59.99
- Sale price
- $59.99
-
Transformer Replacement Part for SR-5016 Electric Slip Roll - Baileigh SR5016-TRANSFORMER
- Regular price
- $130.99
- Sale price
- $130.99
-
Baileigh SR5016-POWER RELAY-4J SR-5016 Slip Roll Power Relay 24V 4J (R1/R2 ~R6)
- Regular price
- $52.99
- Sale price
- $52.99
-
Baileigh SR5016-POWER RELAY-2J SR-5016 Electric Slip Roll Power Relay 24V 2J
- Regular price
- $50.99
- Sale price
- $50.99
-
Bottom Roll Set Replacement Part for SR-5016 Electric Slip Roll - Baileigh SR5016-13
- Regular price
- $70.99
- Sale price
- $70.99
-
Adjustment Screw Replacement Part for SR-5016 Electric Slip Roll - Baileigh SR5016-10
- Regular price
- $43.99
- Sale price
- $43.99
-
Clamp Handle 48mm with Bushings Replacement Part for SR-5016 Electric Slip Roll - Baileigh SR5016-06
- Regular price
- $299.99
- Sale price
- $299.99
-
Top Forming Roll #5 for LF-20 Lockformer - Baileigh LF20-2012
- Regular price
- $305.55
- Sale price
- $305.55
-
Floor Stand for SR-5016M Slip Roll 10 Ga Steel Bolt Together - Baileigh SR-5016M-STAND
- Regular price
- $320.91
- Sale price
- $320.91
-
Electric Slip Roll 50 Inch x 16 Gauge 1 HP 1 Phase 220V with Foot Pedal - Baileigh SR-5016
- Regular price
-
$6,764.00
See Lower Price in Cart
-
Electric Foot Pedal Slip Roll 50 Inch 16 Gauge Mild Steel Capacity 1 HP 110V 1 Phase - Baileigh 1007336
- Regular price
- $4,499.00
- Sale price
- $4,499.00